G Show Commands

show glbp

show glbp [ vrf vrf-name ] [ interface int-num ] [ group group-num ] [ active | standby | disabled | init | listen ] + [ __readonly__ show_glbp_start TABLE_grp_detail sg_if_index sg_group_num sg_cmd_start sg_state sg_state_reason sg_state_count sg_state_last_change sg_vip sg_vip_attr sg_num_vip_sec TABLE_grp_vip_sec sg_vip_sec sg_vip_sec_attr sg_active_addr sg_cur_hello sg_cfg_hello sg_active_hello sg_cur_hold sg_cfg_hold sg_active_hold sg_is_hello_timer_running sg_next_hello sg_cur_redirect_time sg_cfg_redirect_time sg_active_redirect_time sg_cur_sec_holdtime sg_cfg_sec_holdtime sg_active_sec_holdtime sg_cfg_ext_holdtime sg_auth_data_type sg_auth_data sg_preempt sg_preempt_min_delay sg_is_preempt_timer_running sg_preempt_ts sg_active_priority sg_active_timer sg_standby_addr sg_standby_priority sg_standby_timer sg_grp_priority sg_grp_priority_attr sg_weighting sg_weighting_attr sg_weighting_satisfied sg_weighting_max sg_weighting_lower sg_weighting_upper sg_track_object sg_track_state sg_track_decrement sg_load_bal sg_red_name sg_mem_count sg_mem_start TABLE_grp_members sg_mem_local_mac sg_mem_local_ip sg_mem_mac sg_mem_ip sg_is_mem_local sg_is_mem_authenticated sg_mem_end sg_all_mem_end sg_fwd_count sg_active_fwd_count sg_fwd_start TABLE_fwd_detail sg_fwd_num sg_fwd_state sg_fwd_state_change_count sg_fwd_last_state_change sg_fwd_mac sg_fwd_mac_type sg_fwd_cfg_mac sg_fwd_owner sg_fwd_redirect sg_fwd_redirect_timer sg_fwd_is_sec_tmr_run sg_fwd_sec_timer sg_fwd_ttl sg_fwd_ttr sg_fwd_pre sg_fwd_pre_min_delay sg_fwd_is_pre_min_run sg_fwd_pre_min_val sg_fwd_active_router sg_fwd_active_router_attr sg_fwd_weighting sg_fwd_active_addr sg_fwd_active_prio sg_fwd_active_prio_attr sg_fwd_active_prio_weight_attr sg_fwd_active_timer_val sg_fwd_arp_replies sg_fwd_redirection sg_fwd_preempt sg_fwd_end sg_all_fwd_end sg_nsf_state show_glbp_end ]

Syntax Description

show

Show running system information

glbp

Show GLBP

vrf

Display per-VRF information

vrf-name

Type: vrf

VRF name

interface

Interface

int-num

Type: interface

Interface type and number

group

Group number

group-num

Type: integer

min: 0  max: 1023  

Group number

active

Groups in active state

standby

Groups in standby state

disabled

Groups in disabled state

init

Groups in init state

listen

Groups in listen state

__readonly__

Read only

show_glbp_start

Type: uinteger

show glbp start

TABLE_grp_detail

Group table detail

sg_if_index

Type: interface

Interface type and number

sg_group_num

Type: uinteger

Group number

sg_state

glbp state

Active  value: 0x20
Init  value: 0x02
Disabled  value: 0x01
Listen  value: 0x04
Speak  value: 0x08
Standby  value: 0x10
sg_state_reason

Type: string

Reason

sg_state_count

Type: uinteger

Number of state changes

sg_state_last_change

Type: duration

Time of last state change

sg_vip

Type: ipaddr

Virtual IP address

sg_vip_attr

Virtual IP address attribute

config  value: 0
learnt  value: 1
duplicate  value: 2
sg_num_vip_sec

Type: uinteger

Number of Secondary virtual IP address

TABLE_grp_vip_sec

Group secondary ip address

sg_vip_sec

Type: ipaddr

Secondary virtual IP address

sg_vip_sec_attr

Secondary Virtual IP address attribute

config  value: 0
duplicate  value: 2
sg_active_addr

Type: ipaddr

Active IP address

sg_cur_hello

Type: uinteger

Current Hello Time

sg_cfg_hello

Type: uinteger

Configured Hello Time

sg_active_hello

Type: uinteger

Active Hello Time

sg_cur_hold

Type: uinteger

Current Hold Time

sg_cfg_hold

Type: uinteger

Configured Hold Time

sg_active_hold

Type: uinteger

Active Hold Time

sg_is_hello_timer_running

Type: bool

Hello Timer

sg_next_hello

Type: uinteger

Time for next hello

sg_cur_redirect_time

Type: uinteger

Current redirect time

sg_cfg_redirect_time

Type: uinteger

Configured redirect time

sg_active_redirect_time

Type: uinteger

Active redirect time

sg_cur_sec_holdtime

Type: uinteger

Current secondary hold time

sg_cfg_sec_holdtime

Type: uinteger

Configured secondary hold time

sg_active_sec_holdtime

Type: uinteger

Active secondary hold time

sg_cfg_ext_holdtime

Type: uinteger

Configured Extended hold time

sg_auth_data_type

Authentication data type

text  value: 1
key-string  value: 2
key-chain  value: 3
sg_auth_data

Type: string

Authentication data

sg_preempt

Type: bool

Preemption enabled

sg_preempt_min_delay

Type: uinteger

Preemption min delay

sg_is_preempt_timer_running

Type: bool

Preemption timer running

sg_preempt_ts

Type: uinteger

Preemption timestamp

sg_active_priority

Type: uinteger

Active router priority

sg_active_timer

Type: uinteger

Active timer value

sg_standby_addr

Type: ipaddr

Standby address

sg_standby_priority

Type: uinteger

Standby priority

sg_standby_timer

Type: uinteger

Standby timer value

sg_grp_priority

Type: uinteger

Group priority

sg_grp_priority_attr

Type: _enum

Group priority attribute

sg_weighting

Type: uinteger

Weighting

sg_weighting_attr

Type: _enum

Weighting attribute

sg_weighting_satisfied

Type: bool

Weighting satisfied

sg_weighting_max

Type: uinteger

Weighting max

sg_weighting_lower

Type: uinteger

Weighting lower

sg_weighting_upper

Type: uinteger

Weighting upper

sg_track_object

Type: uinteger

Track

sg_track_state

Type: uinteger

Track state

sg_track_decrement

Type: uinteger

Track decrement

sg_load_bal

Load balancing

disabled  value: 1
round-robin  value: 2
weighted  value: 3
host-dependent  value: 4
unknown  value: 5
sg_red_name

Type: string

IP redundancy name

sg_mem_count

Type: uinteger

Membership count

sg_mem_start

Type: uinteger

Start of membership attributes

TABLE_grp_members

Group members

sg_mem_local_mac

Type: ethernet

Member's local mac address

sg_mem_local_ip

Type: ipaddr

Member's local ip address

sg_mem_mac

Type: ethernet

Member's mac address

sg_mem_ip

Type: ipaddr

Member's ip address

sg_is_mem_local

Type: bool

Local

sg_is_mem_authenticated

Type: bool

Is Member authenticated

sg_mem_end

Type: uinteger

End of membership attributes

sg_all_mem_end

Type: uinteger

End of all members

sg_fwd_count

Type: uinteger

Number of forwarders in the group

sg_active_fwd_count

Type: uinteger

Number of active forwarders in group

sg_fwd_start

Type: uinteger

Forwarder Start attribute

TABLE_fwd_detail

Forwarder table detail

sg_fwd_num

Type: uinteger

Forwarder Number

sg_fwd_state

Forwarder State

Active  value: 0x20
Init  value: 0x02
Disabled  value: 0x01
Listen  value: 0x04
sg_fwd_state_change_count

Type: uinteger

Forwarder State Change count

sg_fwd_last_state_change

Type: duration

Time of last State Change

sg_fwd_mac

Type: ethernet

Forwarder MAC address

sg_fwd_mac_type

Type: _enum

Forwarder MAC address type

sg_fwd_cfg_mac

Type: ethernet

Configured Forwarder MAC address

sg_fwd_owner

Type: ethernet

Forwarder owner

sg_fwd_redirect

Type: bool

Forwarder redirection enabled

sg_fwd_redirect_timer

Type: uinteger

Forwarder redirection timer

sg_fwd_is_sec_tmr_run

Type: bool

Is Forwarder secondary timer running

sg_fwd_sec_timer

Type: uinteger

Forwarder secondary timer

sg_fwd_ttl

Type: uinteger

Forwarder ttl

sg_fwd_ttr

Type: uinteger

Forwarder ttr

sg_fwd_pre

Type: bool

Forwarder preemption enabled

sg_fwd_pre_min_delay

Type: uinteger

Forwarder preempt min delay

sg_fwd_is_pre_min_run

Type: bool

Is Forwarder preempt min running

sg_fwd_pre_min_val

Type: uinteger

Forwarder preempt min value

sg_fwd_active_router

Type: ipaddr

Forwarder active router address

sg_fwd_active_router_attr

Type: _enum

Forwarder active router attribute

sg_fwd_weighting

Type: uinteger

Forwarder weighting

sg_fwd_active_addr

Type: ipaddr

Forwarder active address

sg_fwd_active_prio

Type: uinteger

Forwarder active priority

sg_fwd_active_prio_attr

Forwarder priority attribute

primary  value: 1
secondary  value: 2
sg_fwd_active_prio_weight_attr

Forwarder priority weight attribute

none  value: 0
low  value: 1
sg_fwd_active_timer_val

Type: uinteger

Forwarder active timer val

sg_fwd_arp_replies

Type: uinteger

Forwarder arp replies

sg_fwd_redirection

Type: string

Forwarder redirection string

sg_fwd_preempt

Type: string

Forwarder preemption string

sg_fwd_end

Type: uinteger

Forwarder End attribute

sg_all_fwd_end

Type: uinteger

All Forwarders End attribute

sg_nsf_state

Type: bool

show nsf state

sg_cmd_start

Type: bool

start of show command

show_glbp_end

Type: uinteger

End of Group

Command Modes

  • /exec

show glbp brief

show glbp [ vrf vrf-name ] [ interface int-num ] [ group group-num ] [ active | standby | disabled | init | listen ] + brief [ __readonly__ sg_brf_start sg_brf_show_header TABLE_grp sg_brf_int sg_brf_group sg_brf_pri sg_brf_state sg_brf_vip sg_brf_act sg_brf_stdby sg_brf_fwd_start TABLE_fwd sg_brf_fwd_int sg_brf_fwd_group sg_brf_fwd_num sg_brf_fwd_pri sg_brf_fwd_state sg_brf_fwd_mac sg_brf_fwd_act sg_brf_fwd_end sg_brf_all_fwd_end sg_brf_end ]

Syntax Description

show

Show running system information

glbp

Show GLBP

vrf

Display per-VRF information

vrf-name

Type: vrf

VRF name

interface

Interface

int-num

Type: interface

Interface type and number

group

Group number

group-num

Type: integer

min: 0  max: 1023  

Group number

active

Groups in active state

standby

Groups in standby state

disabled

Groups in disabled state

init

Groups in init state

listen

Groups in listen state

brief

Brief output

__readonly__

Read only

sg_brf_start

Type: uinteger

Start of group brief

sg_brf_show_header

Type: uinteger

Show brief header

TABLE_grp

Group table

sg_brf_int

Type: interface

Interface type and number

sg_brf_group

Type: uinteger

Group number

sg_brf_pri

Type: uinteger

Group priority

sg_brf_state

Group state

Active  value: 0x20
Init  value: 0x02
Disabled  value: 0x01
Listen  value: 0x04
Speak  value: 0x08
Standby  value: 0x10
sg_brf_vip

Type: ipaddr

Virtual IP address

sg_brf_act

Type: ipaddr

Active router

sg_brf_stdby

Type: ipaddr

Standby router

sg_brf_fwd_start

Type: uinteger

Start of forwarder brief

TABLE_fwd

Forwarder table

sg_brf_fwd_int

Type: interface

Forwarder interface

sg_brf_fwd_group

Type: uinteger

Forwarder group number

sg_brf_fwd_num

Type: uinteger

Forwarder number

sg_brf_fwd_pri

Type: uinteger

Forwarder priority

sg_brf_fwd_state

Forwarder state

Active  value: 0x20
Init  value: 0x02
Disabled  value: 0x01
Listen  value: 0x04
sg_brf_fwd_mac

Type: ethernet

Forwarder MAC address

sg_brf_fwd_act

Type: ipaddr

Forwarder active address

sg_brf_fwd_end

Type: uinteger

End of forwarder brief

sg_brf_all_fwd_end

Type: uinteger

End of all forwarders in group

sg_brf_end

Type: uinteger

End of group brief

Command Modes

  • /exec

show glbp capability

show glbp capability [ interface int-num ] [ __readonly__ sg_cap_header sg_cap_start TABLE_cap sg_cap_int sg_cap_int_type sg_cap_support sg_cap_max_groups sg_cap_end sg_cap_all_if_end ]

Syntax Description

show

Show running system information

glbp

GLBP

capability

GLBP capability

interface

Interface

int-num

Type: interface

Interface type and number

__readonly__

Read only

sg_cap_header

Type: bool

GLBP capability header

sg_cap_start

Type: uinteger

Start of GLBP capability

TABLE_cap

Capability table

sg_cap_int

Type: interface

Interface

sg_cap_int_type

Type: uinteger

Interface type

sg_cap_support

Type: bool

Is GLBP supported

sg_cap_max_groups

Type: uinteger

Maximum number of GLBP groups

sg_cap_end

Type: uinteger

End of GLBP capability for interface

sg_cap_all_if_end

Type: uinteger

End of GLBP capability for all interfaces

Command Modes

  • /exec