- Preface
- READ ME FIRST
- A Show Commands
- B Show Commands
- C Show Commands
- D Show Commands
- E Show Commands
- F Show Commands
- G Show Commands
- H Show Commands
- I Show Commands
- K Show Commands
- L Show Commands
- M Show Commands
- N Show Commands
- O Show Commands
- P Show Commands
- Q Show Commands
- R Show Commands
- S Show Commands
- T Show Commands
- U Show Commands
- V Show Commands
- X Show Commands
- Index
- show scheduler config
- show scheduler job
- show scheduler logfile
- show scheduler schedule
- show snmp
- show snmp community
- show snmp context
- show snmp engineID
- show snmp group
- show snmp host
- show snmp mib igmpCacheTable
- show snmp mib igmpInterfaceTable
- show snmp mib pimCandidateRPTable
- show snmp mib pimComponentTable
- show snmp mib pimInterfaceTable
- show snmp mib pimIpMRouteNextHopTable
- show snmp mib pimIpMRouteTable
- show snmp mib pimJoinPruneInterval
- show snmp mib pimNeighborTable
- show snmp mib pimRPSetTable
- show snmp pss
- show snmp roledebug
- show snmp sessions
- show snmp snmpv3stats
- show snmp source-interface
- show snmp trap
- show snmp user
- show sockets buffers
- show sockets client
- show sockets connection
- show sockets keychain-dump
- show sockets performance
- show sockets statistics
- show sockets tcp keychain binding
- show spanning-tree (stp)
- show spanning-tree (stp)
- show spanning-tree interface (stp)
- show spanning-tree interface (stp)
- show spanning-tree mst
- show spanning-tree mst configuration __readonly__
- show spanning-tree mst configuration digest __readonly__
- show spanning-tree mst detail
- show spanning-tree mst interface
- show spanning-tree mst interface detail
- show spanning-tree pathcost method
- show spanning-tree summary
- show spanning-tree summary totals
- show spanning-tree vlan (stp)
- show spanning-tree vlan (stp)
- show spanning-tree vlan (stp)
- show spanning-tree vlan (stp)
- show spanning-tree vlan (stp)
- show sprom
- show sprom fex
- show sprom fex all
- show ssh key
- show ssh server
- show startup-config
- show startup-config aaa
- show startup-config acllog
- show startup-config aclmgr
- show startup-config adjmgr
- show startup-config arp
- show startup-config bfd
- show startup-config bgp
- show startup-config bloggerd
- show startup-config callhome
- show startup-config cdp
- show startup-config cert-enroll
- show startup-config cfs
- show startup-config copp
- show startup-config dhcp
- show startup-config diagnostic
- show startup-config eem
- show startup-config eigrp
- show startup-config eltm
- show startup-config exclude
- show startup-config fabricpath
- show startup-config fabricpath topology
- show startup-config fex
- show startup-config glbp
- show startup-config hsrp
- show startup-config icmpv6
- show startup-config igmp
- show startup-config interface (clic)
- show startup-config interface (clic)
- show startup-config ip
- show startup-config ipqos
- show startup-config ipv6
- show startup-config isis
- show startup-config l2pt
- show startup-config l3vm
- show startup-config ldap
- show startup-config license
- show startup-config lldp
- show startup-config log
- show startup-config monitor
- show startup-config msdp
- show startup-config ntp
- show startup-config nv overlay
- show startup-config ospf
- show startup-config ospfv3
- show startup-config pim
- show startup-config pim6
- show startup-config port-security
- show startup-config radius
- show startup-config rip
- show startup-config routing multicast
- show startup-config rpm
- show startup-config rsvp
- show startup-config security
- show startup-config snmp
- show startup-config tacacs+
- show startup-config track
- show startup-config udld
- show startup-config vdc-all
- show startup-config vdc
- show startup-config virtual-service
- show startup-config vlan (clis)
- show startup-config vlan (clis)
- show startup-config vpc
- show startup-config vrf
- show startup-config vrf default
- show startup-config vrrp
- show startup-config vshd
- show startup-config vtp
- show summary
- show system auto-collect tech-support
- show system cores
- show system error-id
- show system exception-info
- show system inband queuing
- show system kgdb
- show system pss shrink status
- show system redundancy ha status
- show system redundancy status
- show system reset-reason (lcmcli)
- show system reset-reason (lcmcli)
- show system reset-reason fex
- show system reset-reason module
- show system resources (process)
- show system resources (process)
- show system resources module
- show system resources module all
- show system routing mode
- show system srg
- show system standby manual-boot
- show system switchover impact
- show system uptime
- show system verify bios
- show system vlan reserved
S Show Commands
- show scheduler config
- show scheduler job
- show scheduler logfile
- show scheduler schedule
- show snmp
- show snmp community
- show snmp context
- show snmp engineID
- show snmp group
- show snmp host
- show snmp mib igmpCacheTable
- show snmp mib igmpInterfaceTable
- show snmp mib pimCandidateRPTable
- show snmp mib pimComponentTable
- show snmp mib pimInterfaceTable
- show snmp mib pimIpMRouteNextHopTable
- show snmp mib pimIpMRouteTable
- show snmp mib pimJoinPruneInterval
- show snmp mib pimNeighborTable
- show snmp mib pimRPSetTable
- show snmp pss
- show snmp roledebug
- show snmp sessions
- show snmp snmpv3stats
- show snmp source-interface
- show snmp trap
- show snmp user
- show sockets buffers
- show sockets client
- show sockets connection
- show sockets keychain-dump
- show sockets performance
- show sockets statistics
- show sockets tcp keychain binding
- show spanning-tree (stp)
- show spanning-tree (stp)
- show spanning-tree interface (stp)
- show spanning-tree interface (stp)
- show spanning-tree mst
- show spanning-tree mst configuration __readonly__
- show spanning-tree mst configuration digest __readonly__
- show spanning-tree mst detail
- show spanning-tree mst interface
- show spanning-tree mst interface detail
- show spanning-tree pathcost method
- show spanning-tree summary
- show spanning-tree summary totals
- show spanning-tree vlan (stp)
- show spanning-tree vlan (stp)
- show spanning-tree vlan (stp)
- show spanning-tree vlan (stp)
- show spanning-tree vlan (stp)
- show sprom
- show sprom fex
- show sprom fex all
- show ssh key
- show ssh server
- show startup-config
- show startup-config aaa
- show startup-config acllog
- show startup-config aclmgr
- show startup-config adjmgr
- show startup-config arp
- show startup-config bfd
- show startup-config bgp
- show startup-config bloggerd
- show startup-config callhome
- show startup-config cdp
- show startup-config cert-enroll
- show startup-config cfs
- show startup-config copp
- show startup-config dhcp
- show startup-config diagnostic
- show startup-config eem
- show startup-config eigrp
- show startup-config eltm
- show startup-config exclude
- show startup-config fabricpath
- show startup-config fabricpath topology
- show startup-config fex
- show startup-config glbp
- show startup-config hsrp
- show startup-config icmpv6
- show startup-config igmp
- show startup-config interface (clic)
- show startup-config interface (clic)
- show startup-config ip
- show startup-config ipqos
- show startup-config ipv6
- show startup-config isis
- show startup-config l2pt
- show startup-config l3vm
- show startup-config ldap
- show startup-config license
- show startup-config lldp
- show startup-config log
- show startup-config monitor
- show startup-config msdp
- show startup-config ntp
- show startup-config nv overlay
- show startup-config ospf
- show startup-config ospfv3
- show startup-config pim
- show startup-config pim6
- show startup-config port-security
- show startup-config radius
- show startup-config rip
- show startup-config routing multicast
- show startup-config rpm
- show startup-config rsvp
- show startup-config security
- show startup-config snmp
- show startup-config tacacs+
- show startup-config track
- show startup-config udld
- show startup-config vdc-all
- show startup-config vdc
- show startup-config virtual-service
- show startup-config vlan (clis)
- show startup-config vlan (clis)
- show startup-config vpc
- show startup-config vrf
- show startup-config vrf default
- show startup-config vrrp
- show startup-config vshd
- show startup-config vtp
- show summary
- show system auto-collect tech-support
- show system cores
- show system error-id
- show system exception-info
- show system inband queuing
- show system kgdb
- show system pss shrink status
- show system redundancy ha status
- show system redundancy status
- show system reset-reason (lcmcli)
- show system reset-reason (lcmcli)
- show system reset-reason fex
- show system reset-reason module
- show system resources (process)
- show system resources (process)
- show system resources module
- show system resources module all
- show system routing mode
- show system srg
- show system standby manual-boot
- show system switchover impact
- show system uptime
- show system verify bios
- show system vlan reserved
show scheduler config
show scheduler config [ __readonly__ [terminal] [feature] [logfilesize] [emailfrom] [emailreplyto] [smtpserver] [port] [usevrf] [ TABLE_userconfig username [password] ] [ TABLE_jobconfig jobdata ] [ TABLE_scheduleconfig schedulename [scheduletype] [ TABLE_jobs status ] [email] ] ]
Syntax Description
| show | Show running system information |
| scheduler | Show scheduler config or data |
| config | Display scheduler config |
| __readonly__ | |
| terminal | Type: string logfile terminal |
| feature | Type: string name service |
| logfilesize | Type: string logfilesize |
| emailfrom | Type: string emailfrom |
| emailreplyto | Type: string emailreplyto |
| smtpserver | Type: string smtpserver |
| port | Type: string port |
| usevrf | Type: string usevrf |
| TABLE_userconfig | userconfig |
| username | Type: string username |
| password | Type: string password |
| TABLE_jobconfig | job configs |
| jobdata | Type: string jobdata |
| TABLE_scheduleconfig | schedule configs |
| schedulename | Type: string schedulename |
| scheduletype | Type: string scheduletype |
| TABLE_jobs | jobs |
| status | Type: string status |
Type: string |
Command Modes
- /exec
show scheduler job
show scheduler job [ name s0 ] [ __readonly__ [ TABLE_schedulerjobs jobname [jobdata] ] ]
Syntax Description
| show | Show running system information |
| scheduler | Show scheduler config or data |
| job | Display job information |
| name | Specify the name of job |
| s0 | Type: string length: 31 Specify the job name |
| __readonly__ | |
| TABLE_schedulerjobs | schedulerjobs |
| jobname | Type: string job name |
| jobdata | Type: string job data |
Command Modes
- /exec
show scheduler logfile
show scheduler logfile [ __readonly__ [ TABLE_joblog jobname [jobstatus] [schedulename] [scheduleusername] [completiontime] [joboutput] ] ]
Syntax Description
| show | Show running system information |
| scheduler | Show scheduler config or data |
| logfile | Display scheduler job output log |
| __readonly__ | |
| TABLE_joblog | jobs log |
| jobname | Type: string job name |
| jobstatus | Type: string job status |
| schedulename | Type: string schedulename |
| scheduleusername | Type: string scheduleusername |
| completiontime | Type: string completiontime |
| joboutput | Type: string joboutput |
Command Modes
- /exec
show scheduler schedule
show scheduler schedule [ name s0 ] [ __readonly__ [ TABLE_schedules schedulename [scheduleusername] [scheduletype] [starttime] [lastexectime] [lastcompletiontime] [execcount] [jobcount] [ TABLE_jobs jobname [execstatus] ] ] ]
Syntax Description
| show | Show running system information |
| scheduler | Show scheduler config or data |
| schedule | Display schedule information |
| name | Specify the name of schedule |
| s0 | Type: string length: 31 Specify the schedule name |
| __readonly__ | |
| TABLE_schedules | schedules |
| schedulename | Type: string Schedule name |
| scheduleusername | Type: string schedule username |
| scheduletype | Type: string scheduletype |
| starttime | Type: string starttime |
| lastexectime | Type: string last exec time |
| lastcompletiontime | Type: string lastcompletiontime |
| execcount | Type: string execcount |
| jobcount | Type: string jobcount |
| TABLE_jobs | jobs |
| jobname | Type: string jobname |
| execstatus | Type: string execstatus |
Command Modes
- /exec
show snmp
show snmp [ __readonly__ sys_contact sys_location snmp_input_packets bad_snmp_version unknown_community_name illegal_community_name encoding_Err req_var_nums alt_var_nums get_req_in getnext_req_in set_req_in noname_pdu_in badval_pdu_in ro_pdu_in genral_err_in get_resp_in unknown_ctx snmp_output_packets trap_pdu toobig_err noname_pdu_out badval_pdu_out genral_err_out get_req_out getnext_req_out set_req_out get_resp_out silent_drops [max_pkt_size] [ TABLE_snmp_community community_name grouporaccess context aclfilter ] [ TABLE_snmp_users user auth priv [ TABLE_groups group ] [engineID] ] tcp_suth_status [ port_mon_status [ policy_name pol_admin_status plo_oper_status pol_port_type [ TABLE_policies counter threshold interval rising_threshold rising_event falling_threshold falling_event pmon_config ] ] ] [protocal_status] [ TABLE_snmp_contexts context_name proto_instanceid vrf topology [ vlan | MST ] ] ]
Syntax Description
| show | Show running system information |
| snmp | show snmp information |
| __readonly__ | Read Only |
| TABLE_snmp_community | Table that displays the community information |
| TABLE_snmp_users | Table that displays the user information |
| TABLE_groups | Table that displays the group information |
| TABLE_policies | Table that displays the policy information |
| TABLE_snmp_contexts | Table that displays the context information |
| sys_contact | Type: string System Contact |
| sys_location | Type: string System Location |
| snmp_input_packets | Type: string SNMP input packets |
| bad_snmp_version | Type: string bad snmp version in Input SNMP packets |
| unknown_community_name | Type: string unknown community name in Input SNMP packets |
| illegal_community_name | Type: string Illegal community name in Input SNMP packets |
| encoding_Err | Type: string Encoding Errors in Input SNMP packets |
| req_var_nums | Type: string number of requested variables |
| alt_var_nums | Type: string number of altered variable |
| get_req_in | Type: string GET request in Input SNMP packets |
| getnext_req_in | Type: string GET-NEXT request in Input SNMP packets |
| set_req_in | Type: string SET request in Input SNMP packets |
| noname_pdu_in | Type: string NONAME PDU in Input SNMP packets |
| badval_pdu_in | Type: string Bad value PDU in Input SNMP packets |
| ro_pdu_in | Type: string Read only PDU in Input SNMP packets |
| genral_err_in | Type: string Genral Error in Input SNMP packets |
| get_resp_in | Type: string Get Response PDU in Input SNMP packets |
| unknown_ctx | Type: string Unknown context Name in Input SNMP packets |
| snmp_output_packets | Type: string SNMP Output Packets |
| trap_pdu | Type: string Trap PDU in Output SNMP Packets |
| toobig_err | Type: string Too Big errors in Output SNMP Packets |
| noname_pdu_out | Type: string
|
| badval_pdu_out | Type: string NoName PDU in Output SNMP Packets |
| genral_err_out | Type: string Genral Error in Output SNMP Packets |
| get_req_out | Type: string GET request in Output SNMP Packets |
| getnext_req_out | Type: string GET-NEXTrequest in Output SNMP Packets |
| set_req_out | Type: string SET request in Output SNMP packets |
| get_resp_out | Type: string Get Response PDU in Output SNMP Packets |
| silent_drops | Type: string Silent Drop packets |
| max_pkt_size | Type: string Maximum packet size |
| community_name | Type: string community name |
| grouporaccess | Type: string Group name |
| context | Type: string contaxt Name |
| aclfilter | Type: string Acl filter name |
| user | Type: string User name |
| auth | Type: string Auth type |
| priv | Type: string Priv Type |
| group | Type: string Group name |
| engineID | Type: string engine id for the user |
| tcp_suth_status | Type: string TCP authentication status |
| port_mon_status | Type: string Port monitor status |
| policy_name | Type: string policy name |
| pol_admin_status | Type: string Policy Admin status |
| plo_oper_status | Type: string Police oper status |
| pol_port_type | Type: string policy port type |
| counter | Type: string counters |
| threshold | Type: string Threshold |
| interval | Type: string Interval |
| rising_threshold | Type: string Rising threshold |
| rising_event | Type: string Rising Event |
| falling_threshold | Type: string Falling threshold |
| falling_event | Type: string Falling Event |
| pmon_config | Type: string PMON configured |
| protocal_status | Type: string Protocal Enable status |
| context_name | Type: string context name |
| proto_instanceid | Type: string Protocal instance ID |
| vrf | Type: string VRF Name |
| topology | Type: string Topology |
| vlan | Type: string VLAN name |
| MST | Type: string MST name |
Command Modes
- /exec
show snmp community
show snmp community [ __readonly__ TABLE_snmp_community community_name grouporaccess context aclfilter ]
Syntax Description
| show | Show running system information |
| snmp | show snmp information |
| community | show snmp community strings |
| __readonly__ | Read Only |
| TABLE_snmp_community | contains all snmp community names |
| community_name | Type: string community name |
| grouporaccess | Type: string group or access name |
| context | Type: string context name |
| aclfilter | Type: string acl filter name |
Command Modes
- /exec
show snmp context
show snmp context [ __readonly__ TABLE_snmp_contexts context_name proto_instanceid vrf topology [ vlan | MST ] ]
Syntax Description
| show | Show running system information |
| snmp | show snmp information |
| context | show snmp context mapping entries |
| __readonly__ | |
| TABLE_snmp_contexts | All SNMP Contexts Entries |
| context_name | Type: string SNMP context Name |
| proto_instanceid | Type: string Name of the protocol instance |
| vrf | Type: string VRF name |
| topology | Type: string Name of the Topology |
| vlan | Type: string VLAN Name |
| MST | Type: string |
Command Modes
- /exec
show snmp engineID
show snmp engineID [ __readonly__ engineIDHex engineIDDec ]
Syntax Description
| show | Show running system information |
| snmp | show snmp information |
| engineID | show snmp engineID |
| __readonly__ | |
| engineIDHex | Type: string SNMP engineID in HEX |
| engineIDDec | Type: string SNMP engineID in Decimal |
Command Modes
- /exec
show snmp group
show snmp group [ __readonly__ TABLE_role role_name role_description [attribute_scope] [permit_vsan] [permit_vlan] [permit_interface] [permit_vrf] [ TABLE_rule rule_num rule_action { rule_permission | rule_permission_mds } [rule_featuretype] [rule_entity] ] ]
Syntax Description
| show | Show running system information |
| snmp | show snmp information |
| group | show snmp group |
| __readonly__ | Read Only |
| TABLE_role | Table displays role |
| role_name | Type: string Role Name |
| role_description | Type: string Role Description |
| attribute_scope | Role scope
|
| permit_vsan | Type: bitmap permitted vsan |
| permit_vlan | Type: bitmap |
| permit_interface | Type: interface-mrange |
| permit_vrf | Type: string |
| TABLE_rule | |
| rule_num | Type: integer min: 1 max: 256 |
| rule_action |
|
| rule_permission |
|
| rule_permission_mds |
|
| rule_featuretype | Type: _enum |
| rule_entity | Type: string |
Command Modes
- /exec
show snmp host
show snmp host [ __readonly__ TABLE_host host port version level type secname [ [vrf] [ TABLE_vrf_filters vrf_filter ] [src_intf] ] ]
Syntax Description
| show | Show running system information |
| snmp | show snmp information |
| host | show snmp hosts |
| __readonly__ | Read Only |
| TABLE_host | displays the list of hosts configured for snmp requests |
| TABLE_vrf_filters | displays the host vrf filters |
| host | Type: string Host address |
| port | Type: string port for thehost ip |
| version | Type: string snmp version |
| level | Type: string security level |
| type | Type: string type of snmp request/response |
| secname | Type: string community name for the snmp req/response |
| vrf | Type: string VRF Name |
| vrf_filter | Type: string vrf filters |
| src_intf | Type: string source interface |
Command Modes
- /exec
show snmp mib igmpCacheTable
show snmp mib igmpCacheTable [igmpCacheAddress-in] [igmpCacheIfIndex-in] [ __readonly__ TABLE_igmpCacheTable igmpCacheAddress-out igmpCacheIfIndex-out igmpCacheSelf igmpCacheLastReporter igmpCacheUpTime igmpCacheExpiryTime igmpCacheStatus igmpCacheVersion1HostTimer ]
Syntax Description
| show | Show running system information |
| snmp | show snmp |
| mib | show mib tables |
| igmpCacheTable | show mib table igmpCacheTable |
| igmpCacheAddress-in | Type: ipaddr igmpCacheAddress |
| igmpCacheIfIndex-in | Type: integer igmpCacheIfIndex |
| __readonly__ | |
| TABLE_igmpCacheTable | |
| igmpCacheAddress-out | Type: ipaddr mib table index igmpCacheAddress |
| igmpCacheIfIndex-out | Type: integer mib table index igmpCacheIfIndex |
| igmpCacheSelf | Type: integer mib object igmpCacheSelf |
| igmpCacheLastReporter | Type: ipaddr mib object igmpCacheLastReporter |
| igmpCacheUpTime | Type: duration mib object igmpCacheUpTime |
| igmpCacheExpiryTime | Type: duration mib object igmpCacheExpiryTime |
| igmpCacheStatus | Type: integer mib object igmpCacheStatus |
| igmpCacheVersion1HostTimer | Type: duration mib object igmpCacheVersion1HostTimer |
Command Modes
- /exec
show snmp mib igmpInterfaceTable
show snmp mib igmpInterfaceTable [igmpInterfaceIfIndex-in] [ __readonly__ TABLE_igmpInterfaceTable igmpInterfaceIfIndex-out igmpInterfaceQueryInterval igmpInterfaceStatus igmpInterfaceVersion igmpInterfaceQuerier igmpInterfaceQueryMaxResponseTime igmpInterfaceQuerierUpTime igmpInterfaceQuerierExpiryTime igmpInterfaceVersion1QuerierTimer igmpInterfaceWrongVersionQueries igmpInterfaceJoins igmpInterfaceProxyIfIndex igmpInterfaceGroups igmpInterfaceRobustness igmpInterfaceLastMembQueryIntvl ]
Syntax Description
| show | Show running system information |
| snmp | show snmp |
| mib | show mib tables |
| igmpInterfaceTable | show mib table igmpInterfaceTable |
| igmpInterfaceIfIndex-in | Type: integer igmpInterfaceIndex |
| __readonly__ | |
| TABLE_igmpInterfaceTable | |
| igmpInterfaceIfIndex-out | Type: integer mib table index igmpInterfaceIfIndex |
| igmpInterfaceQueryInterval | Type: integer mib object igmpInterfaceQueryInterval |
| igmpInterfaceStatus | Type: integer mib object igmpInterfaceStatus |
| igmpInterfaceVersion | Type: integer mib object igmpInterfaceVersion |
| igmpInterfaceQuerier | Type: ipaddr mib object igmpInterfaceQuerier |
| igmpInterfaceQueryMaxResponseTime | Type: integer mib object igmpInterfaceQueryMaxResponseTime |
| igmpInterfaceQuerierUpTime | Type: duration mib object igmpInterfaceQuerierUpTime |
| igmpInterfaceQuerierExpiryTime | Type: duration mib object igmpInterfaceQuerierExpiryTime |
| igmpInterfaceVersion1QuerierTimer | Type: duration mib object igmpInterfaceVersion1QuerierTimer |
| igmpInterfaceWrongVersionQueries | Type: integer mib object igmpInterfaceWrongVersionQueries |
| igmpInterfaceJoins | Type: integer mib object igmpInterfaceJoins |
| igmpInterfaceProxyIfIndex | Type: integer mib object igmpInterfaceProxyIfIndex |
| igmpInterfaceGroups | Type: integer mib object igmpInterfaceGroups |
| igmpInterfaceRobustness | Type: integer mib object igmpInterfaceRobustness |
| igmpInterfaceLastMembQueryIntvl | Type: integer mib object igmpInterfaceLastMembQueryIntvl |
Command Modes
- /exec
show snmp mib pimCandidateRPTable
show snmp mib pimCandidateRPTable [pimCandidateRPGroupAddress-in] [pimCandidateRPGroupMask-in] [ __readonly__ TABLE_pimCandidateRPTable pimCandidateRPGroupAddress-out pimCandidateRPGroupMask-out pimCandidateRPAddress pimCandidateRPRowStatus ]
Syntax Description
| show | Show running system information |
| snmp | show snmp |
| mib | show mib tables |
| pimCandidateRPTable | show mib table pimCandidateRPTable |
| pimCandidateRPGroupAddress-in | Type: ipaddr pimCandidateRPGroupAddress |
| pimCandidateRPGroupMask-in | Type: ipaddr pimCandidateRPGroupMask |
| __readonly__ | |
| TABLE_pimCandidateRPTable | |
| pimCandidateRPGroupAddress-out | Type: ipaddr mib table index pimCandidateRPGroupAddress |
| pimCandidateRPGroupMask-out | Type: ipaddr mib table index pimCandidateRPGroupMask |
| pimCandidateRPAddress | Type: ipaddr mib object pimCandidateRPAddress |
| pimCandidateRPRowStatus | Type: integer mib object pimCandidateRPRowStatus |
Command Modes
- /exec
show snmp mib pimComponentTable
show snmp mib pimComponentTable [pimComponentIndex-in] [ __readonly__ TABLE_pimComponentTable pimComponentIndex-out pimComponentBSRAddress pimComponentBSRExpiryTime pimComponentCRPHoldTime pimComponentStatus ]
Syntax Description
| show | Show running system information |
| snmp | show snmp |
| mib | show mib tables |
| pimComponentTable | show mib table pimComponentTable |
| pimComponentIndex-in | Type: integer pimComponentIndex |
| __readonly__ | |
| TABLE_pimComponentTable | |
| pimComponentIndex-out | Type: integer mib table index pimComponentIndex |
| pimComponentBSRAddress | Type: ipaddr mib object pimComponentBSRAddress |
| pimComponentBSRExpiryTime | Type: duration mib object pimComponentBSRExpiryTime |
| pimComponentCRPHoldTime | Type: integer mib object pimComponentCRPHoldTime |
| pimComponentStatus | Type: integer mib object pimComponentStatus |
Command Modes
- /exec
show snmp mib pimInterfaceTable
show snmp mib pimInterfaceTable [pimInterfaceIfIndex-in] [ __readonly__ TABLE_pimInterfaceTable pimInterfaceIfIndex-out pimInterfaceAddress pimInterfaceNetMask pimInterfaceMode pimInterfaceDR pimInterfaceHelloInterval pimInterfaceStatus pimInterfaceJoinPruneInterval pimInterfaceCBSRPreference ]
Syntax Description
| show | Show running system information |
| snmp | show snmp |
| mib | show mib tables |
| pimInterfaceTable | show mib table pimInterfaceTable |
| pimInterfaceIfIndex-in | Type: integer pimInterfaceIndex |
| __readonly__ | |
| TABLE_pimInterfaceTable | |
| pimInterfaceIfIndex-out | Type: integer mib table index pimInterfaceIfIndex |
| pimInterfaceAddress | Type: ipaddr mib object pimInterfaceAddress |
| pimInterfaceNetMask | Type: ipaddr mib object pimInterfaceNetMask |
| pimInterfaceMode | Type: integer mib object pimInterfaceMode |
| pimInterfaceDR | Type: ipaddr mib object pimInterfaceDR |
| pimInterfaceHelloInterval | Type: integer mib object pimInterfaceHelloInterval |
| pimInterfaceStatus | Type: integer mib object pimInterfaceStatus |
| pimInterfaceJoinPruneInterval | Type: integer mib object pimInterfaceJoinPruneInterval |
| pimInterfaceCBSRPreference | Type: integer mib object pimInterfaceCBSRPreference |
Command Modes
- /exec
show snmp mib pimIpMRouteNextHopTable
show snmp mib pimIpMRouteNextHopTable [ ipMRouteNextHopGroup-in ipMRouteNextHopSource-in ipMRouteNextHopSourceMask-in ipMRouteNextHopIfIndex-in ipMRouteNextHopAddress-in ] [ __readonly__ TABLE_pimIpMRouteNextHopTable ipMRouteNextHopGroup-out ipMRouteNextHopSource-out ipMRouteNextHopSourceMask-out ipMRouteNextHopIfIndex-out ipMRouteNextHopAddress-out pimIpMRouteNextHopPruneReason ]
Syntax Description
| show | Show running system information |
| snmp | show snmp |
| mib | show mib tables |
| pimIpMRouteNextHopTable | show mib table pimIpMRouteNextHopTable |
| ipMRouteNextHopGroup-in | Type: ipaddr ipMRouteNextHopGroup |
| ipMRouteNextHopSource-in | Type: ipaddr ipMRouteNextHopSource |
| ipMRouteNextHopSourceMask-in | Type: ipaddr ipMRouteNextHopSourceMask |
| ipMRouteNextHopIfIndex-in | Type: integer ipMRouteNextHopIfIndex |
| ipMRouteNextHopAddress-in | Type: ipaddr ipMRouteNextHopAddress |
| __readonly__ | |
| TABLE_pimIpMRouteNextHopTable | |
| ipMRouteNextHopGroup-out | Type: integer mib table index ipMRouteNextHopGroup |
| ipMRouteNextHopSource-out | Type: ipaddr mib table index pimComponentBSRAddress |
| ipMRouteNextHopSourceMask-out | Type: duration mib table index pimComponentBSRExpiryTime |
| ipMRouteNextHopIfIndex-out | Type: integer mib table index pimComponentCRPHoldTime |
| ipMRouteNextHopAddress-out | Type: integer mib table index pimComponentStatus |
| pimIpMRouteNextHopPruneReason | Type: integer mib object pimIpMRouteNextHopPruneReason |
Command Modes
- /exec
show snmp mib pimIpMRouteTable
show snmp mib pimIpMRouteTable [ipMRouteGroup-in] [ipMRouteSource-in] [ipMRouteSourceMask-in] [ __readonly__ TABLE_pimIpMRouteTable ipMRouteGroup-out ipMRouteSource-out ipMRouteSourceMask-out pimIpMRouteUpstreamAssertTimer pimIpMRouteAssertMetric pimIpMRouteAssertMetricPref pimIpMRouteAssertRPTBit pimIpMRouteFlags ]
Syntax Description
| show | Show running system information |
| snmp | show snmp |
| mib | show mib tables |
| pimIpMRouteTable | show mib table pimIpMRouteTable |
| ipMRouteGroup-in | Type: ipaddr ipMRouteGroup |
| ipMRouteSource-in | Type: ipaddr ipMRouteSource |
| ipMRouteSourceMask-in | Type: ipaddr ipMRouteSourceMask |
| __readonly__ | |
| TABLE_pimIpMRouteTable | |
| ipMRouteGroup-out | Type: ipaddr mib table index ipMRouteGroup-out |
| ipMRouteSource-out | Type: ipaddr mib table index ipMRouteSource-out |
| ipMRouteSourceMask-out | Type: ipaddr mib table index ipMRouteSourceMask-out |
| pimIpMRouteUpstreamAssertTimer | Type: duration mib object pimIpMRouteUpstreamAssertTimer |
| pimIpMRouteAssertMetric | Type: integer mib object pimIpMRouteAssertMetric |
| pimIpMRouteAssertMetricPref | Type: integer mib object pimIpMRouteAssertMetricPref |
| pimIpMRouteAssertRPTBit | Type: integer mib object pimIpMRouteAssertRPTBit |
| pimIpMRouteFlags | Type: string mib object pimIpMRouteFlags |
Command Modes
- /exec
show snmp mib pimJoinPruneInterval
show snmp mib pimJoinPruneInterval [ __readonly__ pimJoinPruneInterval ]
Syntax Description
| show | Show running system information |
| snmp | show snmp |
| mib | show mib tables |
| pimJoinPruneInterval | show mib scalar pimJoinPruneInterval |
| __readonly__ | Read Only |
| pimJoinPruneInterval | Type: integer mib object pimJoinPruneInterval |
Command Modes
- /exec
show snmp mib pimNeighborTable
show snmp mib pimNeighborTable [pimNeighborAddress-in] [ __readonly__ TABLE_pimNeighborTable pimNeighborAddress-out pimNeighborIfIndex pimNeighborUpTime pimNeighborExpiryTime ]
Syntax Description
| show | Show running system information |
| snmp | show snmp |
| mib | show mib tables |
| pimNeighborTable | show mib table pimNeighborTable |
| pimNeighborAddress-in | Type: ipaddr pimNeighborAddress |
| __readonly__ | |
| TABLE_pimNeighborTable | |
| pimNeighborAddress-out | Type: ipaddr mib table index pimNeighborAddress |
| pimNeighborIfIndex | Type: integer mib object pimNeighborIfIndex |
| pimNeighborUpTime | Type: duration mib object pimNeighborUpTime |
| pimNeighborExpiryTime | Type: duration mib object pimNeighborExpiryTime |
Command Modes
- /exec
show snmp mib pimRPSetTable
show snmp mib pimRPSetTable [pimRPSetComponent-in] [pimRPSetGroupAddress-in] [pimRPSetGroupMask-in] [pimRPSetAddress-in] [ __readonly__ TABLE_pimRPSetTable pimRPSetGroupAddress-out pimRPSetGroupMask-out pimRPSetAddress-out pimRPSetHoldTime pimRPSetExpiryTime pimRPSetComponent-out ]
Syntax Description
| show | Show running system information |
| snmp | show snmp |
| mib | show mib tables |
| pimRPSetTable | show mib table pimRPSetTable |
| pimRPSetComponent-in | Type: integer pimRPSetComponent |
| pimRPSetGroupAddress-in | Type: ipaddr pimRPSetGroupAddress |
| pimRPSetGroupMask-in | Type: ipaddr pimRPSetGroupMask |
| pimRPSetAddress-in | Type: ipaddr pimRPSetAddress |
| __readonly__ | |
| TABLE_pimRPSetTable | |
| pimRPSetGroupAddress-out | Type: ipaddr mib table index pimRPSetGroupAddress |
| pimRPSetGroupMask-out | Type: ipaddr mib table index pimRPSetGroupMask |
| pimRPSetAddress-out | Type: ipaddr mib table index pimRPSetAddress |
| pimRPSetHoldTime | Type: duration mib object pimRPSetHoldTime |
| pimRPSetExpiryTime | Type: duration mib object pimRPSetExpiryTime |
| pimRPSetComponent-out | Type: integer mib table index pimRPSetComponent |
Command Modes
- /exec
show snmp pss
show snmp pss
Syntax Description
| show | Show running system information |
| snmp | show snmp information |
| pss | show SNMP pss |
Command Modes
- /exec
show snmp roledebug
show snmp roledebug
Syntax Description
| show | Show running system information |
| snmp | show snmp information |
| roledebug | show SNMP roledebug |
Command Modes
- /exec
show snmp sessions
show snmp sessions [ __readonly__ TABLE_session dest ]
Syntax Description
| show | Show running system information |
| snmp | show snmp information |
| sessions | show snmp sessions |
| __readonly__ | Read Only |
| TABLE_session | table displays destination |
| dest | Type: string destination |
Command Modes
- /exec
show snmp snmpv3stats
show snmp snmpv3stats
Syntax Description
| show | Show running system information |
| snmp | show snmp information |
| snmpv3stats | show SNMP snmpdebug |
Command Modes
- /exec
show snmp source-interface
show snmp source-interface [ __readonly__ trap_srcintf informs_srcintf ]
Syntax Description
| show | Show running system information |
| snmp | show snmp information |
| source-interface | show source-interface through which notifications are sent |
| __readonly__ | Read Only |
| trap_srcintf | Type: string Displays the source interface for traps |
| informs_srcintf | Type: string Displays the source interface for informs |
Command Modes
- /exec
show snmp trap
show snmp trap [ __readonly__ TABLE_snmp_trap trap_type description isEnabled ]
Syntax Description
| show | Show running system information |
| snmp | show snmp information |
| trap | show snmp traps |
| __readonly__ | Read Only |
| TABLE_snmp_trap | All snmp traps configured |
| trap_type | Type: string Trap Type |
| description | Type: string Trap description |
| isEnabled | Type: string Trap Enabled Status |
Command Modes
- /exec
show snmp user
show snmp user [ s0 [ engineID s1 ] ] [ __readonly__ [ TABLE_snmp_users user auth priv [ TABLE_groups group ] [engineID] ] ]
Syntax Description
| show | Show running system information |
| snmp | show snmp information |
| user | show SNMPv3 users |
| s0 | Type: string length: 28 Name of the user |
| engineID | engineID |
| s1 | Type: string length: 128 Target's SNMP engineID(colon separated) for SNMPv3 inform |
| __readonly__ | Read Only |
| TABLE_snmp_users | table displays the snmp users |
| TABLE_groups | table displays the gropus for specific user |
| user | Type: string user name |
| auth | Type: string auth type |
| priv | Type: string priv type |
| group | Type: string group belongs to |
| engineID | Type: string engineID for specific user |
Command Modes
- /exec
show sockets buffers
show sockets buffers [ [ all count ] [ free count ] ]
Syntax Description
| show | Show running system information |
| sockets | Display sockets status and configuration |
| buffers | Display detailed buffer statistics |
| all | Dump buffers from ALL list |
| free | Dump buffers from FREE list |
| count | Type: integer Number of buffers to dump |
Command Modes
- /exec
show sockets client
show sockets client [ pid pid ] [ tcp | udp | raw ] [detail] [ __readonly__ [ TABLE_total_clients [ socket-type total-clients ] [no-total-clients] ] [ TABLE_cl_sk prefix client-name pid No-of-clients [fast-tcp-mts-ctrl-q] [ cancel-requests cancel-unblocks cancel-misses select-drops select-wakes ] [ TABLE_det [ fd client-id [mts-sap] ] ] [ TABLE_st [soc-calls] [bind-calls] [listen-calls] [accept-calls] [acc-dispat-err] [connect-calls] [connec-dispatch] [recvmsg-dispatch] [recv-dis-nblock] [recvmsg-call] [brecv-dispatch] [fsendmsg-calls] [sendmsg-dispatch] [sendmsg-calls] [msendmsg-calls] [select-calls] [select-dispatch] [select-need-work] [sh-calls] [close-calls] [fcntl-calls] [ioctl-calls] [setsock-calls] [getsock-calls] [getsockname-calls] [getpeer-calls] [fork-calls] [execve-calls] [dup-calls] [can-calls] [can-miss] [can-unblk-sele] [soc-ha-calls] [pfork-client] [read-fd] [write-fd] [read-fd-set] [write-fd-set] [fast-tcp-send-req] [fast-tcp-send-suc] [fast-tcp-ack] ] [ TABLE_sterr [sock-err] [sock-nodev-err] [bind-err] [lis-err] [accept-err] [connect-err] [recvmsg-err] [brcvmsg-err] [fsendmsg-err] [sendmsg-err] [msndmsg-err] [select-err] [sel-nomem-err] [shut-err] [close-err] [fcntl-err] [ioctl-err] [setsoc-err] [getsoc-err] [getsocname-err] [getpeername-err] [fork-err] [execve-err] [dup-err] [psoc-vrf-err] [psoc-nosoc-err] [psoc-sock-null-err] [psoc-socre-err] [pbind-nsock-err] [pbd-getsocaddr] [pbind-sobind-err] [plisten-nsoc-err] [plis-solis-err] [pacc-nsoc-err] [pacc-no-nsoc-err] [pacc-soc-null-err] [pacc-copy-err] [pacc-no-acc-err] [pacc-woublo-err] [pacc-connabo-err] [pacc-cond-wait-err] [pacc-so-err-err] [pacc-err-err] [pcon-no-soc-err] [pcon-ealready-err] [pconn-getsock] [pconn-socon-err] [pconn-einpro-err] [pconn-con-wait-err] [psend-no-soc-err] [psend-inval-iov] [psend-getsoc-err] [psend-msg-ctrl-err] [psend-sockarg-err] [psend-pru-sosend] [precv-nosock-err] [precv-inval-iovlen] [precv-pru-sorecv] [precv-cp-msg-err] [precv-cp-msg-nlen] [precv-cp-data-err] [pbrecv-rcvmsg-err] [pshut-no-soc-err] [psetsoc-val-err] [psetsoc-inv-val] [psetsoc-no-soc-err] [psetsoc-sosetopt] [pgetsoc-no-socerr] [pgetsoc-cp-err] [pgetsoc-val-err] [pgetsoc-sogt-err] [pgtsoc-no-soc-err] [pgtsoc-cp-err] [pgtsoc-pru-soc-err] [pgtsoc-cpout-err] [pgtprne-no-soc-err] [pgtprne-enot-err] [pgtprne-cp-err] [pgtprne-pru-pradd] [pgtprne-cpout-err] [pclose-no-soc-err] [pclose-socnull-err] [pclose-p-cls2-err] [pfcntl-no-soc-err] [pfcntl-soc-null] [pfcntl-enotsup] [pfcntl-einval-err] [pioctl-no-soc-err] [pioctl-enotsup] [pioctl-pru-cntl] [pfork-enomem-err] [pdup-no-soc-err] [pudp-soc-null-err] [ha-nomem-err] [ha-tlv-err] [ha-soc-arg-err] [ha-cli-tlv-err] [ha-pss-upd-err] [ha-no-soc-err] [ha-soc-tlv-err] [ha-soc-pss-upd] [ha-inpcb-tlv] [ha-inpcb-pssky] [ha-ip-mopt-tlv] [ha-ip-mopt-pss] [ha-ip6-mopt-tlv] [ha-ip6-mopt-pss] [ha-tcpcb-tlv] [ha-tcpcb-pss] [ft-tcp-wblock] [ft-send-p-sndmsg] [ft-ack-rcv-no-soc] ] [ TABLE_sp_cl [ can-requests can-unblocks can-misses sel-drops sel-wakes ] ] ] ]
Syntax Description
| show | Show running system information |
| sockets | Display sockets status and configuration |
| client | Display sockets client information |
| pid | Display specific client process information |
| pid | Type: integer min: 1 max: 65535 Display client process <pid> |
| tcp | Display TCP clients |
| udp | Display UDP clients |
| raw | Display RAW clients |
| detail | Display socket details |
| __readonly__ | |
| TABLE_total_clients | Total no of client sockets |
| socket-type | Type: string Sockets type |
| total-clients | Type: longlong |
| no-total-clients | Type: longlong |
| TABLE_cl_sk | Display Client sockets |
| prefix | Type: string Prefix to the sockets |
| client-name | Type: string Display socket client info |
| pid | Type: integer min: 1 max: 65535 Display client process <pid> |
| No-of-clients | Type: longlong Number of socket clients |
| fast-tcp-mts-ctrl-q | Type: uinteger |
| cancel-requests | Type: uinteger |
| cancel-unblocks | Type: uinteger |
| cancel-misses | Type: uinteger |
| select-drops | Type: uinteger |
| select-wakes | Type: uinteger |
| TABLE_det | Display Socket client Details |
| fd | Type: integer Client socket fd |
| client-id | Type: integer Client socket id |
| mts-sap | Type: integer socket mts addr sap |
| TABLE_st | Sock detail Ctrl statistics |
| soc-calls | Type: uinteger |
| bind-calls | Type: uinteger |
| listen-calls | Type: uinteger |
| accept-calls | Type: uinteger |
| acc-dispat-err | Type: uinteger |
| connect-calls | Type: uinteger |
| connec-dispatch | Type: uinteger |
| recvmsg-dispatch | Type: uinteger |
| recv-dis-nblock | Type: uinteger |
| recvmsg-call | Type: uinteger |
| brecv-dispatch | Type: uinteger |
| fsendmsg-calls | Type: uinteger |
| sendmsg-dispatch | Type: uinteger |
| sendmsg-calls | Type: uinteger |
| msendmsg-calls | Type: uinteger |
| select-calls | Type: uinteger |
| select-dispatch | Type: uinteger |
| select-need-work | Type: uinteger |
| sh-calls | Type: uinteger |
| close-calls | Type: uinteger |
| fcntl-calls | Type: uinteger |
| ioctl-calls | Type: uinteger |
| setsock-calls | Type: uinteger |
| getsock-calls | Type: uinteger |
| getsockname-calls | Type: uinteger |
| getpeer-calls | Type: uinteger |
| fork-calls | Type: uinteger |
| execve-calls | Type: uinteger |
| dup-calls | Type: uinteger |
| can-calls | Type: uinteger |
| can-miss | Type: uinteger |
| can-unblk-sele | Type: uinteger |
| soc-ha-calls | Type: uinteger |
| pfork-client | Type: uinteger |
| read-fd | Type: uinteger |
| write-fd | Type: uinteger |
| read-fd-set | Type: uinteger |
| write-fd-set | Type: uinteger |
| fast-tcp-send-req | Type: uinteger |
| fast-tcp-send-suc | Type: uinteger |
| fast-tcp-ack | Type: uinteger |
| TABLE_sterr | Client Socket Error Statistics |
| sock-err | Type: uinteger |
| sock-nodev-err | Type: uinteger |
| bind-err | Type: uinteger |
| lis-err | Type: uinteger |
| accept-err | Type: uinteger |
| connect-err | Type: uinteger |
| recvmsg-err | Type: uinteger |
| brcvmsg-err | Type: uinteger |
| fsendmsg-err | Type: uinteger |
| sendmsg-err | Type: uinteger |
| msndmsg-err | Type: uinteger |
| select-err | Type: uinteger |
| sel-nomem-err | Type: uinteger |
| shut-err | Type: uinteger |
| close-err | Type: uinteger |
| fcntl-err | Type: uinteger |
| ioctl-err | Type: uinteger |
| setsoc-err | Type: uinteger |
| getsoc-err | Type: uinteger |
| getsocname-err | Type: uinteger |
| getpeername-err | Type: uinteger |
| fork-err | Type: uinteger |
| execve-err | Type: uinteger |
| dup-err | Type: uinteger |
| psoc-vrf-err | Type: uinteger |
| psoc-nosoc-err | Type: uinteger |
| psoc-sock-null-err | Type: uinteger |
| psoc-socre-err | Type: uinteger |
| pbind-nsock-err | Type: uinteger |
| pbd-getsocaddr | Type: uinteger |
| pbind-sobind-err | Type: uinteger |
| plisten-nsoc-err | Type: uinteger |
| plis-solis-err | Type: uinteger |
| pacc-nsoc-err | Type: uinteger |
| pacc-no-nsoc-err | Type: uinteger |
| pacc-soc-null-err | Type: uinteger |
| pacc-copy-err | Type: uinteger |
| pacc-no-acc-err | Type: uinteger |
| pacc-woublo-err | Type: uinteger |
| pacc-connabo-err | Type: uinteger |
| pacc-cond-wait-err | Type: uinteger |
| pacc-so-err-err | Type: uinteger |
| pacc-err-err | Type: uinteger |
| pcon-no-soc-err | Type: uinteger |
| pcon-ealready-err | Type: uinteger |
| pconn-getsock | Type: uinteger |
| pconn-socon-err | Type: uinteger |
| pconn-einpro-err | Type: uinteger |
| pconn-con-wait-err | Type: uinteger |
| psend-no-soc-err | Type: uinteger |
| psend-inval-iov | Type: uinteger |
| psend-getsoc-err | Type: uinteger |
| psend-msg-ctrl-err | Type: uinteger |
| psend-sockarg-err | Type: uinteger |
| psend-pru-sosend | Type: uinteger |
| precv-nosock-err | Type: uinteger |
| precv-inval-iovlen | Type: uinteger |
| precv-pru-sorecv | Type: uinteger |
| precv-cp-msg-err | Type: uinteger |
| precv-cp-msg-nlen | Type: uinteger |
| precv-cp-data-err | Type: uinteger |
| pbrecv-rcvmsg-err | Type: uinteger |
| pshut-no-soc-err | Type: uinteger |
| psetsoc-val-err | Type: uinteger |
| psetsoc-inv-val | Type: uinteger |
| psetsoc-no-soc-err | Type: uinteger |
| psetsoc-sosetopt | Type: uinteger |
| pgetsoc-no-socerr | Type: uinteger |
| pgetsoc-cp-err | Type: uinteger |
| pgetsoc-val-err | Type: uinteger |
| pgetsoc-sogt-err | Type: uinteger |
| pgtsoc-no-soc-err | Type: uinteger |
| pgtsoc-cp-err | Type: uinteger |
| pgtsoc-pru-soc-err | Type: uinteger |
| pgtsoc-cpout-err | Type: uinteger |
| pgtprne-no-soc-err | Type: uinteger |
| pgtprne-enot-err | Type: uinteger |
| pgtprne-cp-err | Type: uinteger |
| pgtprne-pru-pradd | Type: uinteger |
| pgtprne-cpout-err | Type: uinteger |
| pclose-no-soc-err | Type: uinteger |
| pclose-socnull-err | Type: uinteger |
| pclose-p-cls2-err | Type: uinteger |
| pfcntl-no-soc-err | Type: uinteger |
| pfcntl-soc-null | Type: uinteger |
| pfcntl-enotsup | Type: uinteger |
| pfcntl-einval-err | Type: uinteger |
| pioctl-no-soc-err | Type: uinteger |
| pioctl-enotsup | Type: uinteger |
| pioctl-pru-cntl | Type: uinteger |
| pfork-enomem-err | Type: uinteger |
| pdup-no-soc-err | Type: uinteger |
| pudp-soc-null-err | Type: uinteger |
| ha-nomem-err | Type: uinteger |
| ha-tlv-err | Type: uinteger |
| ha-soc-arg-err | Type: uinteger |
| ha-cli-tlv-err | Type: uinteger |
| ha-pss-upd-err | Type: uinteger |
| ha-no-soc-err | Type: uinteger |
| ha-soc-tlv-err | Type: uinteger |
| ha-soc-pss-upd | Type: uinteger |
| ha-inpcb-tlv | Type: uinteger |
| ha-inpcb-pssky | Type: uinteger |
| ha-ip-mopt-tlv | Type: uinteger |
| ha-ip-mopt-pss | Type: uinteger |
| ha-ip6-mopt-tlv | Type: uinteger |
| ha-ip6-mopt-pss | Type: uinteger |
| ha-tcpcb-tlv | Type: uinteger |
| ha-tcpcb-pss | Type: uinteger |
| ft-tcp-wblock | Type: uinteger |
| ft-send-p-sndmsg | Type: uinteger |
| ft-ack-rcv-no-soc | Type: uinteger |
| TABLE_sp_cl | Sock specific Ctrl statistics |
| can-requests | Type: uinteger |
| can-unblocks | Type: uinteger |
| can-misses | Type: uinteger |
| sel-drops | Type: uinteger |
| sel-wakes | Type: uinteger |
Command Modes
- /exec
show sockets connection
show sockets connection [ pid pid | tcp | udp | raw ] [ local { srcIP | srcIP6 } ] [ foreign { dstIP | dstIP6 } ] [detail] [keydetails] [ __readonly__ TABLE_vrf vrf-name-out TABLE_afi afi TABLE_conn prot tcp-state rcv-count laddr lport faddr fport intf rcv-count snd-count type ttl tos options state iss snd-una snd-nxt snd_wnd irs rcv-nxt rcv-wnd snd-cwnd srtt rtt rttvar krtt rttmin mss dur flags md5-cnt md5-host md5-err rcv-hiwat rcv-lowat rcv-flags snd-hiwat snd-lowat snd-flags tcp-count udp-count raw-count ]
Syntax Description
| show | Show running system information |
| sockets | Display sockets status and configuration |
| connection | Display connection information |
| pid | Display specific client process connection status |
| pid | Type: integer min: 1 max: 65535 Display client process connection status <pid> |
| tcp | Display all TCP connections |
| udp | Display all UDP connections |
| raw | Display all raw connections |
| local | Display all TCP connections with specified local address |
| srcIP | Type: ipaddr Display all TCP connections with specified local address |
| srcIP6 | Type: ipv6addr Display all TCP connections with specified local address |
| foreign | Display all TCP connections with specified foreign address |
| dstIP | Type: ipaddr Display all TCP connections with specified foreign address |
| dstIP6 | Type: ipv6addr Display all TCP connections with specified foreign address |
| detail | Display detailed connection infomation |
| keydetails | Display md5 key specific details |
| __readonly__ | |
| TABLE_vrf | |
| vrf-name-out | Type: string |
| TABLE_afi | |
| afi |
|
| TABLE_conn | |
| prot | Type: string |
| tcp-state | Type: string |
| rcv-count | Type: uinteger |
| laddr | Type: ipaddr |
| lport | Type: uinteger |
| faddr | Type: ipaddr |
| fport | Type: uinteger |
| intf | Type: string |
| snd-count | Type: uinteger |
| type | Type: string |
| ttl | Type: uinteger |
| tos | Type: uinteger |
| options | Type: string |
| state | Type: string |
| iss | Type: uinteger |
| snd-una | Type: uinteger |
| snd-nxt | Type: uinteger |
| snd_wnd | Type: uinteger |
| irs | Type: uinteger |
| rcv-nxt | Type: uinteger |
| rcv-wnd | Type: uinteger |
| snd-cwnd | Type: uinteger |
| srtt | Type: uinteger |
| rtt | Type: uinteger |
| rttvar | Type: uinteger |
| krtt | Type: uinteger |
| rttmin | Type: uinteger |
| mss | Type: uinteger |
| dur | Type: uinteger |
| flags | Type: uinteger |
| md5-cnt | Type: uinteger |
| md5-host | Type: string |
| md5-err | Type: uinteger |
| rcv-hiwat | Type: uinteger |
| rcv-lowat | Type: uinteger |
| rcv-flags | Type: uinteger |
| snd-hiwat | Type: uinteger |
| snd-lowat | Type: uinteger |
| snd-flags | Type: uinteger |
| tcp-count | Type: uinteger |
| udp-count | Type: uinteger |
| raw-count | Type: uinteger |
Command Modes
- /exec
show sockets keychain-dump
show sockets keychain-dump
Syntax Description
| show | Show running system information |
| sockets | Display sockets status and configuration |
| keychain-dump | Dump the pss information for keychains |
Command Modes
- /exec
show sockets performance
show sockets performance [clear]
Syntax Description
| show | Show running system information |
| sockets | Display sockets status and configuration |
| performance | Display detailed perf statistics |
| clear | Clear perf statistics |
Command Modes
- /exec
show sockets statistics
show sockets statistics [ all | tcp | tcp6 | tcpsum | udp | udp6 | udpsum | raw | raw6 | rawsum ] [ __readonly__ TABLE_vrf vrf-name-out TABLE_afi afi TABLE_stat version rx-total rx-bad-csum rx-bad-offset rx-too-short rx-bad-md5 rx-inseq-pack rx-inseq-bytes rx-dup-pack rx-dup-bytes rx-partdup-pack rx-partdup-bytes rx-oo-pack rx-oo-bytes rx-afterwin-pack rx-afterwin-bytes rx-afterclose-pack rx-winprobe-pack rx-winupdate-pack rx-dupack-pack rx-dupack-unsent-pack rx-ack-pack rx-ack-bytes tx-total tx-urg tx-ctrl tx-data-pack tx-data-bytes tx-reasm-pack tx-reasm-bytes tx-ackonly-pack tx-winprobe-pack tx-winupdate-bytes tx-conn-init tx-conn-accepted tx-conn-estd tx-rxmt-timeout tx-rxmt-timeout-dropped tx-ka-timeout tx-ka-probe tx-ka-drop closed dropped emb-dropped udp-rx-total udp-rx-bad-csum udp-rx-no-csum udp-rx-too-short udp-rx-bad-len udp-rx-no-port udp-rx-no-port-bcast udp-rx-no-port-mcast udp-rx-full-socket-drop udp-tx-total raw-rx-rcvd raw-rx-no-port raw-rx-full-socket-drop raw-tx-sent ]
Syntax Description
| show | Show running system information |
| sockets | Display sockets status and configuration |
| statistics | Display sockets statistics |
| all | Display TCP/UDP/RAW v4/v6 protocols statistics |
| tcp | Display TCP v4 protocol statistics |
| tcp6 | Display TCP v6 protocol statistics |
| tcpsum | Display sum of TCP v4 and TCP v6 protocols statistics |
| udp | Display UDP v4 protocol statistics |
| udp6 | Display UDP v6 protocol statistics |
| udpsum | Display sum of UDP v4 and UDP v6 protocols statistics |
| raw | Display RAW v4 protocol statistics |
| raw6 | Display RAW v6 protocol statistics |
| rawsum | Display sum of RAW v4 and RAW v6 protocols statistics |
| __readonly__ | |
| TABLE_vrf | |
| vrf-name-out | Type: string |
| TABLE_afi | |
| afi |
|
| TABLE_stat | |
| rx-total | Type: uinteger |
| rx-bad-csum | Type: uinteger |
| rx-bad-offset | Type: uinteger |
| rx-too-short | Type: uinteger |
| rx-bad-md5 | Type: uinteger |
| rx-inseq-pack | Type: uinteger |
| rx-inseq-bytes | Type: uinteger |
| rx-dup-pack | Type: uinteger |
| rx-dup-bytes | Type: uinteger |
| rx-partdup-pack | Type: uinteger |
| rx-partdup-bytes | Type: uinteger |
| rx-oo-pack | Type: uinteger |
| rx-oo-bytes | Type: uinteger |
| rx-afterwin-pack | Type: uinteger |
| rx-afterwin-bytes | Type: uinteger |
| rx-afterclose-pack | Type: uinteger |
| rx-winprobe-pack | Type: uinteger |
| rx-winupdate-pack | Type: uinteger |
| rx-dupack-pack | Type: uinteger |
| rx-dupack-unsent-pack | Type: uinteger |
| rx-ack-pack | Type: uinteger |
| rx-ack-bytes | Type: uinteger |
| tx-total | Type: uinteger |
| tx-urg | Type: uinteger |
| tx-ctrl | Type: uinteger |
| tx-data-pack | Type: uinteger |
| tx-data-bytes | Type: uinteger |
| tx-reasm-pack | Type: uinteger |
| tx-reasm-bytes | Type: uinteger |
| tx-ackonly-pack | Type: uinteger |
| tx-winprobe-pack | Type: uinteger |
| tx-winupdate-bytes | Type: uinteger |
| tx-conn-init | Type: uinteger |
| tx-conn-accepted | Type: uinteger |
| tx-conn-estd | Type: uinteger |
| tx-rxmt-timeout | Type: uinteger |
| tx-rxmt-timeout-dropped | Type: uinteger |
| tx-ka-timeout | Type: uinteger |
| tx-ka-probe | Type: uinteger |
| tx-ka-drop | Type: uinteger |
| closed | Type: uinteger |
| dropped | Type: uinteger |
| emb-dropped | Type: uinteger |
| udp-rx-total | Type: uinteger |
| udp-rx-bad-csum | Type: uinteger |
| udp-rx-no-csum | Type: uinteger |
| udp-rx-too-short | Type: uinteger |
| udp-rx-bad-len | Type: uinteger |
| udp-rx-no-port | Type: uinteger |
| udp-rx-no-port-bcast | Type: uinteger |
| udp-rx-no-port-mcast | Type: uinteger |
| udp-rx-full-socket-drop | Type: uinteger |
| udp-tx-total | Type: uinteger |
| raw-rx-rcvd | Type: uinteger |
| raw-rx-no-port | Type: uinteger |
| raw-rx-full-socket-drop | Type: uinteger |
| raw-tx-sent | Type: uinteger |
| version | Type: string |
Command Modes
- /exec
show sockets tcp keychain binding
show sockets tcp keychain binding [ __readonly__ TABLE_keychain keychain handle ref_count ]
Syntax Description
| show | Show running system information |
| sockets | Display sockets status and configuration |
| tcp | TCP information |
| keychain | Keychain information |
| binding | Binding information reagarding RPM |
| __readonly__ | |
| TABLE_keychain | all sockets tcp keychains |
| keychain | Type: string xml keychain information |
| handle | Type: hex xml handle information |
| ref_count | Type: integer xml refcount information |
Command Modes
- /exec
show spanning-tree (stp)
show spanning-tree [ vlan vlan-id ] { verbosity | active } +
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| vlan | VLAN Switch Spanning Trees |
| vlan-id | Type: vlan-mrange vlan range, Example: 1,3-5,7,9-11 |
| verbosity | verbosity
|
| active | Report on active interfaces only |
Command Modes
- /exec
show spanning-tree (stp)
show spanning-tree [ vlan vlan-id ] [ __readonly__ TABLE_tree tree_id tree_tree_type tree_protocol port_count bridge_mac bridge_priority tree_designated_root tree_designated_root_priority stp_active root_path_cost root_port_if_index root_port_priority root_port_number topology_change topology_change_detected topology_change_count topology_change_time_since_last tc_initiator_if_index bridge_forward_delay bridge_max_age bridge_hello_time max_age hello_time forward_delay hold_time hello_timer topology_change_timer tcn_timer aging_timer disabled blocking listening learning forwarding invalid TABLE_port if_index port_info_tree_id state role port_priority port_number port_protocol port_tree_type path_cost port_designated_root port_designated_root_priority designated_cost designated_bridge designated_bridge_priority designated_port tc_acknowledge forward_transition_count self_looped inconsistency bpdus_in bpdus_out port_fast link_type port_guard bpdu_guard bpdu_filter oper_portfast oper_p2p oper_loopguard oper_bpduguard oper_bpdufilter int_bpdufilter [oper_networkport] forward_delay_timer hold_timer message_age peer dispute pvstsim_inc_timer [boundary] [simulate_pvst_cfg] [simulate_pvst] [prestd] ]
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| vlan | VLAN Switch Spanning Trees |
| vlan-id | Type: vlan-mrange vlan range, Example: 1,3-5,7,9-11 |
| __readonly__ | Read Only |
| TABLE_tree | |
| tree_id | Type: uinteger Tree Id |
| tree_tree_type | Tree Type
|
| tree_protocol | Tree Protocol
|
| port_count | Type: uinteger Number of Ports in Tree |
| bridge_mac | Type: ethernet Bridge Mac |
| bridge_priority | Type: uinteger Bridge Priority |
| tree_designated_root | Type: ethernet Designated Root Mac |
| tree_designated_root_priority | Type: uinteger Designated Root Priority |
| stp_active | Type: bool Spanning Tree State |
| root_path_cost | Type: uinteger Root Path Cost |
| root_port_if_index | Type: interface Root Port |
| root_port_priority | Type: uinteger Root Port Priority |
| root_port_number | Type: uinteger Root Port Number |
| topology_change | Type: bool Topology Change flag is set ? |
| topology_change_detected | Type: bool Topology Change detected flag is set ? |
| topology_change_count | Type: uinteger Topology Change Count |
| topology_change_time_since_last | Type: uinteger Time since last TC |
| tc_initiator_if_index | Type: interface Topology Change initiator port |
| max_age | Type: uinteger Max Age |
| hello_time | Type: uinteger Hello Time |
| forward_delay | Type: uinteger Forward delay |
| bridge_max_age | Type: uinteger Configured Bridge Max Age |
| bridge_hello_time | Type: uinteger Configured Hello Time |
| bridge_forward_delay | Type: uinteger Configured Forward Delay |
| hold_time | Type: uinteger Configured Hold Time |
| hello_timer | Type: uinteger Hello Timer Value |
| topology_change_timer | Type: uinteger Topology Change Timer Value |
| tcn_timer | Type: uinteger TCN Timer Value |
| aging_timer | Type: uinteger Ageing Timer Value |
| disabled | Type: uinteger Number of ports Disabled |
| blocking | Type: uinteger Number of ports Blocking |
| listening | Type: uinteger Number of ports Listening |
| learning | Type: uinteger Number of ports Learning |
| forwarding | Type: uinteger Number of ports Forwarding |
| invalid | Type: uinteger Number of ports Invalid |
| TABLE_port | |
| if_index | Type: interface Interface |
| state | STP Port State
|
| role | STP Port Role
|
| port_priority | Type: uinteger Port priority |
| port_number | Type: uinteger Port Number |
| port_info_tree_id | Type: uinteger Tree Id |
| port_tree_type | Tree Type
|
| port_protocol | Tree Protocol
|
| path_cost | Type: uinteger Cost configured on this port |
| port_designated_root | Type: ethernet Designated Root Mac |
| port_designated_root_priority | Type: uinteger Designated Root Priority |
| designated_cost | Type: uinteger Designated cost |
| designated_bridge | Type: ethernet Designated bridge mac |
| designated_bridge_priority | Type: uinteger Designated bridge priority |
| designated_port | Type: uinteger Designated Port Id |
| tc_acknowledge | Type: bool Is topology change acknowledge flag set ? |
| forward_transition_count | Type: uinteger Port transitions to Forwarding |
| self_looped | Type: bool Is Port self looped ? |
| inconsistency | Type: uinteger PVST+ Inconsistency Error Flags |
| bpdus_in | Type: uinteger BPDUs received on this stp port |
| bpdus_out | Type: uinteger BPDUs send on this stp port |
| port_fast | Port Fast configured on port
|
| link_type | Link type configured on this port
|
| port_guard | Port Guard mode of port
|
| bpdu_guard | Bpdu Guard mode configured
|
| bpdu_filter | Bpdu Filter mode configured
|
| oper_portfast | Type: bool Is portfast enabled ? |
| oper_p2p | Type: bool Is port P2P ? |
| oper_loopguard | Type: bool Is loopguard enabled ? |
| oper_bpduguard | Type: bool Is bpduguard enabled ? |
| oper_bpdufilter | Type: bool Is bpdufilter enabled ? |
| int_bpdufilter | Type: bool Is internal bpdufilter enabled ? |
| forward_delay_timer | Type: uinteger Forward Delay timer |
| hold_timer | Type: uinteger Hold Timer |
| message_age | Type: uinteger Message age timer |
| peer | STP protocol of the peer
|
| dispute | Type: bool Is port Disputed ? |
| pvstsim_inc_timer | Type: uinteger PVST Simulation Inconsistency Hold Timer |
| boundary | Type: bool Is port boundary ? |
| prestd | Type: bool Is port Pre STD MST ? |
| simulate_pvst | Type: bool Is port is pvst simulate mode ? |
| oper_networkport | Type: bool Is network port enabled ? |
| simulate_pvst_cfg | PVST Simulation configured on port
|
Command Modes
- /exec
show spanning-tree interface (stp)
show spanning-tree [ vlan vlan-id ] interface interface-id { verbosity | active } +
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| vlan | VLAN Switch Spanning Trees |
| vlan-id | Type: vlan-mrange vlan range, Example: 1,3-5,7,9-11 |
| interface | Spanning Tree interface status and configuration |
| interface-id | Type: interface |
| verbosity | verbosity
|
| active | Report on active instances only |
Command Modes
- /exec
show spanning-tree interface (stp)
show spanning-tree [ vlan vlan-id ] interface interface-id [ __readonly__ TABLE_port if_index port_info_tree_id state role port_priority port_number port_protocol port_tree_type path_cost port_designated_root port_designated_root_priority designated_cost designated_bridge designated_bridge_priority designated_port tc_acknowledge forward_transition_count self_looped inconsistency bpdus_in bpdus_out port_fast link_type port_guard bpdu_guard bpdu_filter oper_portfast oper_p2p oper_loopguard oper_bpduguard oper_bpdufilter int_bpdufilter forward_delay_timer hold_timer message_age peer dispute pvstsim_inc_timer prestd boundary simulate_pvst oper_networkport simulate_pvst_cfg ]
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| vlan | VLAN Switch Spanning Trees |
| vlan-id | Type: vlan-mrange vlan range, Example: 1,3-5,7,9-11 |
| interface | Spanning Tree interface status and configuration |
| interface-id | Type: interface |
| __readonly__ | Read Only |
| TABLE_port | |
| if_index | Type: interface Interface |
| port_info_tree_id | Type: uinteger Tree Id |
| state | STP Port State
|
| role | STP Port Role
|
| port_priority | Type: uinteger Port priority |
| port_number | Type: uinteger Port Number |
| port_tree_type | Tree Type
|
| port_protocol | Tree Protocol
|
| path_cost | Type: uinteger Cost configured on this port |
| port_designated_root | Type: ethernet Designated Root Mac |
| port_designated_root_priority | Type: uinteger Designated Root Priority |
| designated_cost | Type: uinteger Designated cost |
| designated_bridge | Type: ethernet Designated bridge mac |
| designated_bridge_priority | Type: uinteger Designated bridge priority |
| designated_port | Type: uinteger Designated Port Id |
| tc_acknowledge | Type: bool Is topology change acknowledge flag set ? |
| forward_transition_count | Type: uinteger Port transitions to Forwarding |
| self_looped | Type: bool Is Port self looped ? |
| inconsistency | Type: uinteger PVST+ Inconsistency Error Flags |
| bpdus_in | Type: uinteger BPDUs received on this stp port |
| bpdus_out | Type: uinteger BPDUs send on this stp port |
| port_fast | Port Fast configured on port
|
| link_type | Link type configured on this port
|
| port_guard | Port Guard mode of port
|
| bpdu_guard | Bpdu Guard mode configured
|
| bpdu_filter | Bpdu Filter mode configured
|
| oper_portfast | Type: bool Is portfast enabled ? |
| oper_p2p | Type: bool Is port P2P ? |
| oper_loopguard | Type: bool Is loopguard enabled ? |
| oper_bpduguard | Type: bool Is bpduguard enabled ? |
| oper_bpdufilter | Type: bool Is bpdufilter enabled ? |
| int_bpdufilter | Type: bool Is internal bpdufilter enabled ? |
| forward_delay_timer | Type: uinteger Forward Delay timer |
| hold_timer | Type: uinteger Hold Timer |
| message_age | Type: uinteger Message age timer |
| peer | STP protocol of the peer
|
| dispute | Type: bool Is port Disputed ? |
| pvstsim_inc_timer | Type: uinteger PVST Simulation Inconsistency Hold Timer |
| boundary | Type: bool Is port boundary ? |
| prestd | Type: bool Is port Pre STD MST ? |
| simulate_pvst | Type: bool Is port is pvst simulate mode ? |
| oper_networkport | Type: bool Is network port enabled ? |
| simulate_pvst_cfg | PVST Simulation configured on port
|
Command Modes
- /exec
show spanning-tree mst
show spanning-tree mst [mst-id] [ __readonly__ TABLE_tree tree_id tree_tree_type tree_protocol port_count bridge_mac bridge_priority tree_designated_root tree_designated_root_priority stp_active root_path_cost root_port_if_index root_port_priority root_port_number topology_change topology_change_detected topology_change_count topology_change_time_since_last tc_initiator_if_index bridge_forward_delay bridge_max_age bridge_hello_time max_age hello_time forward_delay hold_time hello_timer topology_change_timer tcn_timer aging_timer disabled blocking listening learning forwarding invalid ist-master-id-mac ist-master-prio ist-path-cost remaining-hops max-hops txholdcount tree-vlan-map TABLE_port if_index port_info_tree_id state role port_priority port_number port_protocol port_tree_type path_cost port_designated_root port_designated_root_priority designated_cost designated_bridge designated_bridge_priority designated_port tc_acknowledge forward_transition_count self_looped inconsistency bpdus_in bpdus_out port_fast link_type port_guard bpdu_guard bpdu_filter oper_portfast oper_p2p oper_loopguard oper_bpduguard oper_bpdufilter int_bpdufilter [oper_networkport] forward_delay_timer hold_timer message_age peer dispute pvstsim_inc_timer boundary simulate_pvst prestd [designated_ist_master] [designated_ist_master_priority] [designated_ist_cost] [vlan-map] ]
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| mst | Multiple spanning trees |
| mst-id | Type: integer-mrange MST instance range, example: 0-3,5,7-9 |
| __readonly__ | Read Only |
| TABLE_tree | |
| tree_id | Type: uinteger Tree Id |
| tree_tree_type | Tree Type
|
| tree_protocol | Tree Protocol
|
| port_count | Type: uinteger Number of Ports in Tree |
| bridge_mac | Type: ethernet Bridge Mac |
| bridge_priority | Type: uinteger Bridge Priority |
| tree_designated_root | Type: ethernet Designated Root Mac |
| tree_designated_root_priority | Type: uinteger Designated Root Priority |
| stp_active | Type: bool Spanning Tree State |
| root_path_cost | Type: uinteger Root Path Cost |
| root_port_if_index | Type: interface Root Port |
| root_port_priority | Type: uinteger Root Port Priority |
| root_port_number | Type: uinteger Root Port Number |
| topology_change | Type: bool Topology Change flag is set ? |
| topology_change_detected | Type: bool Topology Change detected flag is set ? |
| topology_change_count | Type: uinteger Topology Change Count |
| topology_change_time_since_last | Type: uinteger Time since last TC |
| tc_initiator_if_index | Type: interface Topology Change initiator port |
| max_age | Type: uinteger Max Age |
| hello_time | Type: uinteger Hello Time |
| forward_delay | Type: uinteger Forward delay |
| bridge_max_age | Type: uinteger Configured Bridge Max Age |
| bridge_hello_time | Type: uinteger Configured Hello Time |
| bridge_forward_delay | Type: uinteger Configured Forward Delay |
| hold_time | Type: uinteger Configured Hold Time |
| hello_timer | Type: uinteger Hello Timer Value |
| topology_change_timer | Type: uinteger Topology Change Timer Value |
| tcn_timer | Type: uinteger TCN Timer Value |
| aging_timer | Type: uinteger Ageing Timer Value |
| disabled | Type: uinteger Number of ports Disabled |
| blocking | Type: uinteger Number of ports Blocking |
| listening | Type: uinteger Number of ports Listening |
| learning | Type: uinteger Number of ports Learning |
| forwarding | Type: uinteger Number of ports Forwarding |
| invalid | Type: uinteger Number of ports Invalid |
| ist-master-id-mac | Type: ethernet IST Master ID MAC address |
| ist-master-prio | Type: uinteger IST Master ID priority |
| ist-path-cost | Type: uinteger IST path cost |
| remaining-hops | Type: uinteger Remaining hops |
| max-hops | Type: uinteger Max Hops |
| txholdcount | Type: uinteger TX Hold count |
| tree-vlan-map | Type: string Bitmap of vlans mapped to tree |
| TABLE_port | |
| if_index | Type: interface Interface |
| state | STP Port State
|
| role | STP Port Role
|
| port_priority | Type: uinteger Port priority |
| port_number | Type: uinteger Port Number |
| port_info_tree_id | Type: uinteger Tree Id |
| port_tree_type | Tree Type
|
| port_protocol | Tree Protocol
|
| path_cost | Type: uinteger Cost configured on this port |
| port_designated_root | Type: ethernet Designated Root Mac |
| port_designated_root_priority | Type: uinteger Designated Root Priority |
| designated_cost | Type: uinteger Designated cost |
| designated_bridge | Type: ethernet Designated bridge mac |
| designated_bridge_priority | Type: uinteger Designated bridge priority |
| designated_port | Type: uinteger Designated Port Id |
| tc_acknowledge | Type: bool Is topology change acknowledge flag set ? |
| forward_transition_count | Type: uinteger Port transitions to Forwarding |
| self_looped | Type: bool Is Port self looped ? |
| inconsistency | Type: uinteger PVST+ Inconsistency Error Flags |
| bpdus_in | Type: uinteger BPDUs received on this stp port |
| bpdus_out | Type: uinteger BPDUs send on this stp port |
| port_fast | Port Fast configured on port
|
| link_type | Link type configured on this port
|
| port_guard | Port Guard mode of port
|
| bpdu_guard | Bpdu Guard mode configured
|
| bpdu_filter | Bpdu Filter mode configured
|
| oper_portfast | Type: bool Is portfast enabled ? |
| oper_p2p | Type: bool Is port P2P ? |
| oper_loopguard | Type: bool Is loopguard enabled ? |
| oper_bpduguard | Type: bool Is bpduguard enabled ? |
| oper_bpdufilter | Type: bool Is bpdufilter enabled ? |
| int_bpdufilter | Type: bool Is internal bpdufilter enabled ? |
| forward_delay_timer | Type: uinteger Forward Delay timer |
| hold_timer | Type: uinteger Hold Timer |
| message_age | Type: uinteger Message age timer |
| peer | STP protocol of the peer
|
| boundary | Type: bool Is port boundary ? |
| simulate_pvst | Type: bool Is port is pvst simulate mode ? |
| dispute | Type: bool Is port Disputed ? |
| pvstsim_inc_timer | Type: uinteger PVST Simulation Inconsistency Hold Timer |
| prestd | Type: bool Is port Pre STD MST ? |
| designated_ist_master | Type: ethernet Ist master mac |
| designated_ist_master_priority | Type: uinteger Ist master priority |
| designated_ist_cost | Type: uinteger Ist master path cost |
| vlan-map | Type: string Bitmap of vlans mapped to port |
| oper_networkport | Type: bool Is network port enabled ? |
Command Modes
- /exec
show spanning-tree mst configuration __readonly__
show spanning-tree mst configuration [ __readonly__ stp-mode name rev-id Instance_to_vlan_map mst_id vlan_bit_map [pvlan-sync] ]
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| mst | Multiple spanning trees |
| configuration | MST current region configuration |
| __readonly__ | Read Only |
| stp-mode | Spanning Tree operating mode
|
| name | Type: string Configuration name |
| rev-id | Type: uinteger min: 0 max: 65535 Configuration revision number |
| Instance_to_vlan_map | Instance to vlan mapping Info |
| mst_id | Type: integer MST Instance ID |
| vlan_bit_map | Type: bitmap VLAN Bitmap |
| pvlan-sync | Type: string pvlan synchronization |
Command Modes
- /exec
show spanning-tree mst configuration digest __readonly__
show spanning-tree mst configuration digest [ __readonly__ stp-mode name rev-id digest prestd-digest [pvlan-sync] ]
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| mst | Multiple spanning trees |
| configuration | MST current region configuration |
| digest | Display MST configuration digest |
| __readonly__ | Read Only |
| stp-mode | Spanning Tree operating mode
|
| name | Type: string Configuration name |
| rev-id | Type: uinteger min: 0 max: 65535 Configuration revision number |
| digest | Type: string MST region configuration digest |
| prestd-digest | Type: string MST region configuration pre-std digest |
| pvlan-sync | Type: string pvlan synchronization |
Command Modes
- /exec
show spanning-tree mst detail
show spanning-tree mst [mst-id] detail
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| mst | Multiple spanning trees |
| mst-id | Type: integer-mrange MST instance range, example: 0-3,5,7-9 |
| detail | Detailed information |
Command Modes
- /exec
show spanning-tree mst interface
show spanning-tree mst [mst-id] interface interface-id [ __readonly__ TABLE_port if_index port_info_tree_id state role port_priority port_number port_protocol port_tree_type path_cost port_designated_root port_designated_root_priority designated_cost designated_bridge designated_bridge_priority designated_port tc_acknowledge forward_transition_count self_looped inconsistency bpdus_in bpdus_out port_fast link_type port_guard bpdu_guard bpdu_filter oper_portfast oper_p2p oper_loopguard oper_bpduguard oper_bpdufilter int_bpdufilter forward_delay_timer hold_timer message_age peer dispute prestd boundary simulate_pvst [designated_ist_master] [designated_ist_master_priority] [designated_ist_cost] [vlan-map] [oper_networkport] [pvstsim_inc_timer] ]
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| mst | Multiple spanning trees |
| mst-id | Type: integer-mrange MST instance range, example: 0-3,5,7-9 |
| interface | Spanning Tree interface status and configuration |
| interface-id | Type: interface Specify an interface as a target for the command |
| __readonly__ | Read Only |
| TABLE_port | |
| if_index | Type: interface Interface |
| port_info_tree_id | Type: uinteger Tree Id |
| state | STP Port State
|
| role | STP Port Role
|
| port_priority | Type: uinteger Port priority |
| port_number | Type: uinteger Port Number |
| port_tree_type | Tree Type
|
| port_protocol | Tree Protocol
|
| path_cost | Type: uinteger Cost configured on this port |
| port_designated_root | Type: ethernet Designated Root Mac |
| port_designated_root_priority | Type: uinteger Designated Root Priority |
| designated_cost | Type: uinteger Designated cost |
| designated_bridge | Type: ethernet Designated bridge mac |
| designated_bridge_priority | Type: uinteger Designated bridge priority |
| designated_port | Type: uinteger Designated Port Id |
| tc_acknowledge | Type: bool Is topology change acknowledge flag set ? |
| forward_transition_count | Type: uinteger Port transitions to Forwarding |
| self_looped | Type: bool Is Port self looped ? |
| inconsistency | Type: uinteger PVST+ Inconsistency Error Flags |
| bpdus_in | Type: uinteger BPDUs received on this stp port |
| bpdus_out | Type: uinteger BPDUs send on this stp port |
| port_fast | Port Fast configured on port
|
| link_type | Link type configured on this port
|
| port_guard | Port Guard mode of port
|
| bpdu_guard | Bpdu Guard mode configured
|
| bpdu_filter | Bpdu Filter mode configured
|
| oper_portfast | Type: bool Is portfast enabled ? |
| oper_p2p | Type: bool Is port P2P ? |
| oper_loopguard | Type: bool Is loopguard enabled ? |
| oper_bpduguard | Type: bool Is bpduguard enabled ? |
| oper_bpdufilter | Type: bool Is bpdufilter enabled ? |
| int_bpdufilter | Type: bool Is internal bpdufilter enabled ? |
| forward_delay_timer | Type: uinteger Forward Delay timer |
| hold_timer | Type: uinteger Hold Timer |
| message_age | Type: uinteger Message age timer |
| peer | STP protocol of the peer
|
| boundary | Type: bool Is port boundary ? |
| simulate_pvst | Type: bool Is port is pvst simulate mode ? |
| dispute | Type: bool Is port Disputed ? |
| prestd | Type: bool Is port Pre STD MST ? |
| designated_ist_master | Type: ethernet Ist master mac |
| designated_ist_master_priority | Type: uinteger Ist master priority |
| designated_ist_cost | Type: uinteger Ist master path cost |
| vlan-map | Type: string Bitmap of vlans mapped to port |
| oper_networkport | Type: bool Is network port enabled ? |
| pvstsim_inc_timer | Type: uinteger PVST Simulation Inconsistency Hold Timer |
Command Modes
- /exec
show spanning-tree mst interface detail
show spanning-tree mst [mst-id] interface interface-id detail
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| mst | Multiple spanning trees |
| mst-id | Type: integer-mrange MST instance range, example: 0-3,5,7-9 |
| detail | Detailed information |
| interface | Spanning Tree interface status and configuration |
| interface-id | Type: interface Specify an interface as a target for the command |
Command Modes
- /exec
show spanning-tree pathcost method
show spanning-tree pathcost method
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| pathcost | Show Spanning pathcost options |
| method | Default pathcost calculation method |
Command Modes
- /exec
show spanning-tree summary
show spanning-tree [ vlan vlan-id ] summary [ __readonly__ stp-mode stp_tree_root_info tree_type bridge_mac bridge_priority tree_designated_root tree_designated_root_priority stp_root_bmp_info stp_root_tree_type tree_root_bmp stp_l2gstp_bmp_info stp_l2gstp_tree_type stp_l2gstp_bmp stp_global_info pcost_method oper_pcost_method port_fast bpdu_guard bpdu_filter oper_loopguard bridge_assurance networkport_default simulate_pvst max-hops peer_switch_cfg oper_peer_switch stp_l2gstp_domain_id stp_lite TABLE_tree stp_tree_summary summary_tree_type disabled blocking listening learning forwarding invalid port_count stp_summary_totals total_tree_type disabled blocking listening learning forwarding invalid port_count ]
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| vlan | VLAN Switch Spanning Trees |
| vlan-id | Type: vlan-mrange vlan range, Example: 1,3-5,7,9-11 |
| summary | Summary of port states |
| __readonly__ | Read Only |
| stp-mode | Spanning Tree operating mode
|
| stp_tree_root_info | Type: uinteger STP Tree Root info marker |
| tree_type | Tree Type
|
| bridge_mac | Type: ethernet Bridge Mac |
| bridge_priority | Type: uinteger Bridge Priority |
| tree_designated_root | Type: ethernet Designated Root Mac |
| tree_designated_root_priority | Type: uinteger Designated Root Priority |
| stp_root_bmp_info | Type: uinteger STP root bitmap info marker |
| stp_root_tree_type | Tree Type
|
| tree_root_bmp | Type: bitmap STP tree root bmp |
| stp_l2gstp_bmp_info | Type: string L2 Gateway STP bitmap marker |
| stp_l2gstp_tree_type | Tree Type
|
| stp_l2gstp_bmp | Type: bitmap L2 Gateway STP bitmap |
| stp_global_info | Type: uinteger STP global info marker |
| pcost_method | Type: uinteger STP pathcost method |
| oper_pcost_method | Type: uinteger STP oper pathcost method |
| port_fast | Port Fast configured on port
|
| bpdu_guard | Bpdu Guard mode configured
|
| bpdu_filter | Bpdu Filter mode configured
|
| oper_loopguard | Type: bool Is loopguard enabled ? |
| bridge_assurance | Type: uinteger Bridge Assurance |
| networkport_default | Type: uinteger Network Port default |
| simulate_pvst | Type: bool Is port is pvst simulate mode ? |
| max-hops | Type: uinteger Max Hops |
| peer_switch_cfg | Type: uinteger peer switch configuration status |
| oper_peer_switch | Type: uinteger peer switch operational status |
| stp_l2gstp_domain_id | Type: uinteger L2 Gateway STP Domain ID |
| stp_lite | Type: uinteger STP-Lite |
| TABLE_tree | |
| stp_tree_summary | Type: uinteger STP Tree Summary |
| summary_tree_type | Tree Type
|
| disabled | Type: uinteger Number of ports Disabled |
| blocking | Type: uinteger Number of ports Blocking |
| listening | Type: uinteger Number of ports Listening |
| learning | Type: uinteger Number of ports Learning |
| forwarding | Type: uinteger Number of ports Forwarding |
| invalid | Type: uinteger Number of ports Invalid |
| port_count | Type: uinteger Number of Ports in Tree |
| stp_summary_totals | Type: uinteger Total num STP trees |
| total_tree_type | Tree Type
|
| disabled | Type: uinteger Number of ports Disabled |
| blocking | Type: uinteger Number of ports Blocking |
| listening | Type: uinteger Number of ports Listening |
| learning | Type: uinteger Number of ports Learning |
| forwarding | Type: uinteger Number of ports Forwarding |
| invalid | Type: uinteger Number of ports Invalid |
| port_count | Type: uinteger Number of Ports in Tree |
Command Modes
- /exec
show spanning-tree summary totals
show spanning-tree summary totals [ __readonly__ stp-mode stp_tree_root_info tree_type bridge_mac bridge_priority tree_designated_root tree_designated_root_priority stp_root_bmp_info stp_root_tree_type tree_root_bmp stp_l2gstp_bmp_info stp_l2gstp_tree_type stp_l2gstp_bmp stp_global_info pcost_method oper_pcost_method port_fast bpdu_guard bpdu_filter oper_loopguard bridge_assurance networkport_default simulate_pvst max-hops peer_switch_cfg oper_peer_switch stp_l2gstp_domain_id stp_lite stp_summary_totals total_tree_type disabled blocking listening learning forwarding invalid port_count ]
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| summary | Summary of port states |
| totals | Only show totals |
| __readonly__ | Read Only |
| stp-mode | Spanning Tree operating mode
|
| stp_tree_root_info | Type: uinteger STP Tree Root info marker |
| tree_type | Tree Type
|
| bridge_mac | Type: ethernet Bridge Mac |
| bridge_priority | Type: uinteger Bridge Priority |
| tree_designated_root | Type: ethernet Designated Root Mac |
| tree_designated_root_priority | Type: uinteger Designated Root Priority |
| stp_root_bmp_info | Type: uinteger STP root bitmap info marker |
| stp_root_tree_type | Tree Type
|
| tree_root_bmp | Type: bitmap STP tree root bmp |
| stp_l2gstp_bmp_info | Type: string L2 Gateway STP bitmap marker |
| stp_l2gstp_tree_type | Tree Type
|
| stp_l2gstp_bmp | Type: bitmap L2 Gateway STP bitmap |
| stp_global_info | Type: uinteger STP global info marker |
| pcost_method | Type: uinteger STP pathcost method |
| oper_pcost_method | Type: uinteger STP oper pathcost method |
| port_fast | Port Fast configured on port
|
| bpdu_guard | Bpdu Guard mode configured
|
| bpdu_filter | Bpdu Filter mode configured
|
| oper_loopguard | Type: bool Is loopguard enabled ? |
| bridge_assurance | Type: uinteger Bridge Assurance |
| networkport_default | Type: uinteger Network Port default |
| simulate_pvst | Type: bool Is port is pvst simulate mode ? |
| max-hops | Type: uinteger Max Hops |
| peer_switch_cfg | Type: uinteger peer switch configuration status |
| oper_peer_switch | Type: uinteger peer switch operational status |
| stp_l2gstp_domain_id | Type: uinteger L2 Gateway STP Domain ID |
| stp_lite | Type: uinteger STP-Lite |
| stp_summary_totals | Type: uinteger Total num STP trees |
| total_tree_type | Tree Type
|
| disabled | Type: uinteger Number of ports Disabled |
| blocking | Type: uinteger Number of ports Blocking |
| listening | Type: uinteger Number of ports Listening |
| learning | Type: uinteger Number of ports Learning |
| forwarding | Type: uinteger Number of ports Forwarding |
| invalid | Type: uinteger Number of ports Invalid |
| port_count | Type: uinteger Number of Ports in Tree |
Command Modes
- /exec
show spanning-tree vlan (stp)
show spanning-tree [ vlan vlan-id ] blockedports
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| vlan | VLAN Switch Spanning Trees |
| vlan-id | Type: vlan-mrange vlan range, Example: 1,3-5,7,9-11 |
| blockedports | Show blocked ports |
Command Modes
- /exec
show spanning-tree vlan (stp)
show spanning-tree [ vlan vlan-id ] inconsistentports
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| vlan | VLAN Switch Spanning Trees |
| vlan-id | Type: vlan-mrange vlan range, Example: 1,3-5,7,9-11 |
| inconsistentports | Show inconsistent ports |
Command Modes
- /exec
show spanning-tree vlan (stp)
show spanning-tree [ vlan vlan-id ] bridge [ priority [system-id] ] | show spanning-tree [ vlan vlan-id ] bridge [ detail | brief ] | show spanning-tree [ vlan vlan-id ] bridge [ address | forward-time | hello-time | id | max-age | protocol ]
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| vlan | VLAN Switch Spanning Trees |
| vlan-id | Type: vlan-mrange vlan range, Example: 1,3-5,7,9-11 |
| bridge | Status and configuration of this bridge |
| address | Mac address of this bridge |
| forward-time | Forward delay interval |
| hello-time | Hello time |
| id | Spanning tree bridge identifier |
| max-age | Max age |
| protocol | Spanning tree protocol |
| brief | Brief summary of the status and configuration output |
| detail | Detailed of the status and configuration |
| priority | Bridge priority of this bridge |
| system-id | Spanning tree priority with system id extension |
Command Modes
- /exec
show spanning-tree vlan (stp)
show spanning-tree [ vlan vlan-id ] interface interface-id { cost | inconsistency | edge | priority | rootcost | state }
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| vlan | VLAN Switch Spanning Trees |
| vlan-id | Type: vlan-mrange vlan range, Example: 1,3-5,7,9-11 |
| interface | Spanning Tree interface status and configuration |
| interface-id | Type: interface |
| cost | Port path cost |
| inconsistency | Port inconsistency state |
| edge | Edge Port configuration |
| priority | Port priority |
| rootcost | Path cost to root |
| state | Port spanning tree state |
Command Modes
- /exec
show spanning-tree vlan (stp)
show spanning-tree [ vlan vlan-id ] root [ priority [system-id] ] | show spanning-tree [ vlan vlan-id ] root [ address | cost | forward-time | hello-time | id | max-age | port ] | show spanning-tree [ vlan vlan-id ] root [ detail | brief ]
Syntax Description
| show | Show running system information |
| spanning-tree | Show spanning tree information |
| vlan | VLAN Switch Spanning Trees |
| vlan-id | Type: vlan-mrange vlan range, Example: 1,3-5,7,9-11 |
| root | Status and configuration of the root bridge |
| address | Mac address of this bridge |
| cost | Path cost from this bridge to the root |
| forward-time | Forward delay interval |
| hello-time | Hello time |
| id | Spanning tree bridge identifier |
| max-age | Max age |
| port | Root port |
| brief | Brief summary of interface information |
| detail | Detailed information |
| priority | Bridge priority of this bridge |
| system-id | Spanning tree priority with system id extension |
Command Modes
- /exec
show sprom
show sprom { backplane i0 | module module i1 | xbar santa-cruz-range i2 | powersupply i3 | fan i4 | sup | stby-sup | all } [ __readonly__ cmn_block blk_sig_cb blk_ver_cb blk_length_cb blk_checksum_cb eeprom_size blk_count fru_major_type fru_minor_type oem_string prd_num serial_num part_num part_rev mfg_dev hw_rev mfg_bits eng_use snmp_oid power_consump rma_code clei_code vid sup_specific_block blk_sig_ssb blk_ver_ssb blk_length_ssb blk_checksum_ssb feature_bits hw_changes_bits card_index mac_addresses no_of_macs no_of_epld TABLE_epld epld_name epld_ver port_type_num max_connector_power cooling_reqt amb_temp TABLE_sensor_ssb sensor_num_ssb maj_thres_ssb min_thres_ssb lc_specific_block blk_sig_lc blk_ver_lc blk_length_lc blk_checksum_lc feature_bits hw_changes_bits card_index mac_addresses no_of_macs no_of_epld TABLE_epld epld_name epld_ver port_type_num max_connector_power cooling_reqt amb_temp TABLE_sensor_lc sensor_num_lc maj_thres_lc min_thres_lc ps_specific_block blk_sig_psb blk_ver_psb blk_length_psb blk_checksum_psb feature_bits current_110v current_220v stackmib_oid fan_specific_block blk_sig_fsb blk_ver_fsb blk_length_fsb blk_checksum_fsb feature_bits hw_change_bits stackmib_oid cooling_capacity amb_temp ch_specific_block blk_sig_csb blk_ver_csb blk_length_csb blk_checksum_csb feature_bits hw_changes_bits stackmib_oid mac_addresses no_of_macs oem_enterprise oem_mib_offset max_connector_power temp_sensor_block blk_sig_tsb blk_ver_tsb blk_length_tsb blk_checksum_tsb no_of_sensors TABLE_sensor_tsb sensor_num_tsb maj_thres_tsb min_thres_tsb wwn_specific_block blk_sig_wwnb blk_ver_wwnb blk_length_wwnb blk_checksum_wwnb wwn_usage_bits lic_specific_block blk_sig_licb blk_ver_licb blk_length_licb blk_checksum_licb lic_usage_bits second_serial_block blk_sig_sn2b blk_ver_sn2b blk_length_sn2b blk_checksum_sn2b serial_num_sn2b psu_common_block format_version internal_info_offset chassis_info_offset board_info_offset product_info_offset multirecord_info_offset checksum psu_board_info_block format_version length language_code mfg_date mfg_type mfg_info name_type product_name snum_type snum part_type partnum fruid_type fruid bom_hw_pid_info partnum_rev fab_revision vid clei_len clei eof_marker csum psu_product_info_block format_version length language_code mfg_type mfg_info name_type product_name part_type partnum product_ver_type sw_certification snum_type snum asset_type asset_string fruid_type fruid custom_pinfo partnumrev vid eof_marker csum psu_record_info_block record_type record_info record_len record_csum header_csum record_identifier format_ver standby_pwr_budget psu_class psu_watts ]
Syntax Description
| show | Show running system information |
| sprom | show SPROM contents |
| backplane | show backplane clock module sprom contents |
| i0 | Type: integer min: 1 max: 2 please enter instance of backplane sprom |
| module | show linecard module sprom contents |
| module | Type: integer please enter module number |
| i1 | Type: integer min: 1 max: 4 please enter instance of module sprom |
| xbar | show xbar fabric sprom contents |
| santa-cruz-range | Type: integer please enter the xbar number |
| i2 | Type: integer min: 1 max: 4 please enter sprom instance number |
| powersupply | show powersupply sprom contents |
| i3 | Type: integer min: 1 max: 16 please enter powersupply number |
| fan | show fan module sprom contents |
| i4 | Type: integer min: 1 max: 6 please enter fan number |
| sup | show supervisor sprom contents |
| stby-sup | show standby supervisor sprom contents |
| all | show all sproms contents |
| __readonly__ | |
| cmn_block | |
| blk_sig_cb | Type: string |
| blk_ver_cb | Type: string |
| blk_length_cb | Type: string |
| blk_checksum_cb | Type: string |
| eeprom_size | Type: string |
| blk_count | Type: string |
| fru_major_type | Type: string |
| fru_minor_type | Type: string |
| oem_string | Type: string |
| prd_num | Type: string |
| serial_num | Type: string |
| part_num | Type: string |
| part_rev | Type: string |
| mfg_dev | Type: string |
| hw_rev | Type: string |
| mfg_bits | Type: string |
| eng_use | Type: string |
| snmp_oid | Type: string |
| power_consump | Type: string |
| rma_code | Type: string |
| clei_code | Type: string |
| vid | Type: string |
| ch_specific_block | |
| blk_sig_csb | Type: string |
| blk_ver_csb | Type: string |
| blk_length_csb | Type: string |
| blk_checksum_csb | Type: string |
| feature_bits | Type: string |
| hw_changes_bits | Type: string |
| stackmib_oid | Type: string |
| mac_addresses | Type: string |
| no_of_macs | Type: string |
| oem_enterprise | Type: string |
| oem_mib_offset | Type: string |
| max_connector_power | Type: string |
| sup_specific_block | |
| blk_sig_ssb | Type: string |
| blk_ver_ssb | Type: string |
| blk_length_ssb | Type: string |
| blk_checksum_ssb | Type: string |
| feature_bits | Type: string |
| hw_changes_bits | Type: string |
| card_index | Type: string |
| mac_addresses | Type: string |
| no_of_macs | Type: string |
| no_of_epld | Type: string |
| TABLE_epld | |
| epld_name | Type: string |
| epld_ver | Type: string |
| port_type_num | Type: string |
| max_connector_power | Type: string |
| cooling_reqt | Type: string |
| amb_temp | Type: string |
| TABLE_sensor_ssb | |
| sensor_num_ssb | Type: string |
| maj_thres_ssb | Type: string |
| min_thres_ssb | Type: string |
| lc_specific_block | |
| blk_sig_lc | Type: string |
| blk_ver_lc | Type: string |
| blk_length_lc | Type: string |
| blk_checksum_lc | Type: string |
| feature_bits | Type: string |
| hw_changes_bits | Type: string |
| card_index | Type: string |
| mac_addresses | Type: string |
| no_of_macs | Type: string |
| no_of_epld | Type: string |
| TABLE_epld | |
| epld_name | Type: string |
| epld_ver | Type: string |
| port_type_num | Type: string |
| max_connector_power | Type: string |
| cooling_reqt | Type: string |
| amb_temp | Type: string |
| TABLE_sensor_lc | |
| sensor_num_lc | Type: string |
| maj_thres_lc | Type: string |
| min_thres_lc | Type: string |
| ps_specific_block | |
| blk_sig_psb | Type: string |
| blk_ver_psb | Type: string |
| blk_length_psb | Type: string |
| blk_checksum_psb | Type: string |
| feature_bits | Type: string |
| current_110v | Type: string |
| current_220v | Type: string |
| stackmib_oid | Type: string |
| fan_specific_block | |
| blk_sig_fsb | Type: string |
| blk_ver_fsb | Type: string |
| blk_length_fsb | Type: string |
| blk_checksum_fsb | Type: string |
| feature_bits | Type: string |
| hw_change_bits | Type: string |
| stackmib_oid | Type: string |
| cooling_capacity | Type: string |
| amb_temp | Type: string |
| temp_sensor_block | |
| blk_sig_tsb | Type: string |
| blk_ver_tsb | Type: string |
| blk_length_tsb | Type: string |
| blk_checksum_tsb | Type: string |
| no_of_sensors | Type: string |
| TABLE_sensor_tsb | |
| sensor_num_tsb | Type: string |
| maj_thres_tsb | Type: string |
| min_thres_tsb | Type: string |
| wwn_specific_block | |
| blk_sig_wwnb | Type: string |
| blk_ver_wwnb | Type: string |
| blk_length_wwnb | Type: string |
| blk_checksum_wwnb | Type: string |
| wwn_usage_bits | Type: string |
| lic_specific_block | |
| blk_sig_licb | Type: string |
| blk_ver_licb | Type: string |
| blk_length_licb | Type: string |
| blk_checksum_licb | Type: string |
| lic_usage_bits | Type: string |
| second_serial_block | |
| blk_sig_sn2b | Type: string |
| blk_ver_sn2b | Type: string |
| blk_length_sn2b | Type: string |
| blk_checksum_sn2b | Type: string |
| serial_num_sn2b | Type: string |
| psu_common_block | |
| format_version | Type: string |
| internal_info_offset | Type: string |
| chassis_info_offset | Type: string |
| board_info_offset | Type: string |
| product_info_offset | Type: string |
| multirecord_info_offset | Type: string |
| checksum | Type: string |
| psu_board_info_block | |
| format_version | Type: string |
| length | Type: string |
| language_code | Type: string |
| mfg_date | Type: string |
| mfg_type | Type: string |
| mfg_info | Type: string |
| name_type | Type: string |
| product_name | Type: string |
| snum_type | Type: string |
| snum | Type: string |
| part_type | Type: string |
| partnum | Type: string |
| fruid_type | Type: string |
| fruid | Type: string |
| bom_hw_pid_info | Type: string |
| partnum_rev | Type: string |
| fab_revision | Type: string |
| vid | Type: string |
| clei_len | Type: string |
| clei | Type: string |
| eof_marker | Type: string |
| csum | Type: string |
| psu_product_info_block | |
| format_version | Type: string |
| length | Type: string |
| language_code | Type: string |
| mfg_type | Type: string |
| mfg_info | Type: string |
| name_type | Type: string |
| product_name | Type: string |
| part_type | Type: string |
| partnum | Type: string |
| product_ver_type | Type: string |
| sw_certification | Type: string |
| snum_type | Type: string |
| snum | Type: string |
| asset_type | Type: string |
| asset_string | Type: string |
| fruid_type | Type: string |
| fruid | Type: string |
| custom_pinfo | Type: string |
| partnumrev | Type: string |
| vid | Type: string |
| eof_marker | Type: string |
| csum | Type: string |
| psu_record_info_block | |
| record_type | Type: string |
| record_info | Type: string |
| record_len | Type: string |
| record_csum | Type: string |
| header_csum | Type: string |
| record_identifier | Type: string |
| format_ver | Type: string |
| standby_pwr_budget | Type: string |
| psu_class | Type: string |
| psu_watts | Type: string |
Command Modes
- /exec
show sprom fex
show sprom fex i { all | backplane | powersupply i1 }
Syntax Description
| show | Show running system information |
| sprom | SPROM Contents |
| fex | Fex |
| i | Type: integer min: 100 max: 199 Enter FEX identifier |
| all | Show all SPROM content on this specific FEX only |
| backplane | Show backplane SPROM content on this fex |
| powersupply | Show powersupply SPROM content on this fex only |
| i1 | Type: integer min: 1 max: 2 powersupply module number |
Command Modes
- /exec
show sprom fex all
show sprom fex all
Syntax Description
| show | Show running system information |
| sprom | SPROM Contents |
| fex | Fex |
| all | Show all SPROM content all FEX |
Command Modes
- /exec
show ssh key
show ssh key [ dsa | rsa ] [ __readonly__ TABLE_sessions key_type key_time key_data key_bitcount key_fingerprint ]
Syntax Description
| show | Show running system information |
| ssh | Show SSH information |
| key | Show ssh keys |
| dsa | Show dsa ssh keys |
| rsa | Show rsa ssh keys |
| __readonly__ | |
| TABLE_sessions | ssh key |
| key_type | Type: string keys type |
| key_time | Type: string timestamp |
| key_data | Type: string ssh key data |
| key_bitcount | Type: string bitcount |
| key_fingerprint | Type: string fingerprint |
Command Modes
- /exec
show ssh server
show ssh server [ __readonly__ operation_status o_status ]
Syntax Description
| show | Show running system information |
| ssh | Show SSH information |
| server | Show whether ssh server is enabled or not |
| __readonly__ | |
| operation_status | run-time information about ssh |
| o_status | operational status of ssh server
|
Command Modes
- /exec
show startup-config
show startup-config
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
Command Modes
- /exec
show startup-config aaa
show startup-config aaa
Syntax Description
| show | show startup-cfg |
| startup-config | show startup system information |
| aaa | Display aaa configuration |
Command Modes
- /exec
show startup-config acllog
show startup-config acllog [all]
Syntax Description
| show | Show running system information |
| startup-config | Displaying the startup configuration |
| acllog | show startup config for acllog |
| all | show startup config with defaults |
Command Modes
- /exec
show startup-config aclmgr
show startup-config aclmgr [all]
Syntax Description
| show | Show running system information |
| startup-config | Display the startup configuration |
| aclmgr | show startup config for aclmgr |
| all | show startup config with defaults |
Command Modes
- /exec
show startup-config adjmgr
show startup-config adjmgr [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| adjmgr | Display adjmgr information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config arp
show startup-config arp [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| arp | Display arp information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config bfd
show startup-config bfd [all]
Syntax Description
| show | Show system information |
| startup-config | Display the startup configuration |
| bfd | show startup config for bfd |
| all | show startup config with defaults |
Command Modes
- /exec
show startup-config bgp
show startup-config bgp [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| bgp | Display bgp information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config bloggerd
show startup-config bloggerd [all]
Syntax Description
| show | show startup-cfg |
| startup-config | show system startup configuration information |
| bloggerd | Display bloggerd configuration |
| all | show startup config with defaults |
Command Modes
- /exec
show startup-config callhome
show startup-config callhome
Syntax Description
| show | show startup-cfg |
| startup-config | show startup system information |
| callhome | Display callhome configuration |
Command Modes
- /exec
show startup-config cdp
show startup-config cdp [all]
Syntax Description
| show | show startup-cfg |
| startup-config | show system startup configuration information |
| cdp | Display cdp configuration |
| all | show startup config with defaults |
Command Modes
- /exec
show startup-config cert-enroll
show startup-config cert-enroll
Syntax Description
| show | show startup-cfg |
| startup-config | show startup system information |
| cert-enroll | Display certificates configuration |
Command Modes
- /exec
show startup-config cfs
show startup-config cfs [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| cfs | Display cfs configurations |
| all | show running config with defaults |
Command Modes
- /exec
show startup-config copp
show startup-config copp [all]
Syntax Description
| show | Show running system information |
| startup-config | System startup-config commands |
| copp | Control-Plane Policing |
| all | show startup config with defaults |
Command Modes
- /exec
show startup-config dhcp
show startup-config dhcp [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| dhcp | Display dhcp snoop configurations |
| all | show running config with defaults |
Command Modes
- /exec
show startup-config diagnostic
show startup-config diagnostic [all]
Syntax Description
| show | Show running system information |
| startup-config | Contents of startup configuration |
| diagnostic | Diagnostic configuration |
| all | Display running config with defaults |
Command Modes
- /exec
show startup-config eem
show startup-config eem
Syntax Description
| show | Show running system information |
| startup-config | Show the system startup configuration |
| eem | Show the event manager startup configuration |
Command Modes
- /exec
show startup-config eigrp
show startup-config eigrp [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| eigrp | Display eigrp information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config eltm
show startup-config eltm
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| eltm | Display eltm configurations |
Command Modes
- /exec
show startup-config exclude
show startup-config exclude feature-list+
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| exclude | Exclude startup configuration of specified features |
| feature-list | Exclude features
|
Command Modes
- /exec
show startup-config fabricpath
show startup-config fabricpath
Syntax Description
| show | Show running system information |
| startup-config | System startup-config commands |
| fabricpath | fabricpath information |
Command Modes
- /exec
show startup-config fabricpath topology
show startup-config fabricpath topology [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| fabricpath | fabricpath Module Information |
| topology | Fabricpath topology Information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config fex
show startup-config fex [all]
Syntax Description
| show | Show running system information |
| startup-config | Display the startup configuration |
| fex | show startup config of fex |
| all | Show startup config with defaults |
Command Modes
- /exec
show startup-config glbp
show startup-config glbp
Syntax Description
| show | Show system information |
| startup-config | System startup configuration |
| glbp | GLBP startup configuration |
Command Modes
- /exec
show startup-config hsrp
show startup-config hsrp
Syntax Description
| show | Show system information |
| startup-config | System startup configuration |
| hsrp | HSRP startup configuration |
Command Modes
- /exec
show startup-config icmpv6
show startup-config icmpv6 [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| icmpv6 | Display icmpv6 information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config igmp
show startup-config igmp [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| igmp | Display igmp information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config interface (clic)
show startup-config interface if0 [membership]
Syntax Description
| show |
Show running system information |
| startup-config |
Current startup configuration |
| interface |
Interface configuration |
| if0 |
Type: interface-mrange interface type and number in module/slot format |
| membership |
Show membership information |
Command Modes
- /exec
show startup-config interface (clic)
show startup-config interface [if0]
Syntax Description
| show |
Show running system information |
| startup-config |
Current startup configuration |
| interface |
Interface configuration |
| if0 |
Type: interface-mrange interface type and number in module/slot format |
Command Modes
- /exec
show startup-config ip
show startup-config ip [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| ip | Display ip information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config ipqos
show startup-config ipqos [all]
Syntax Description
| show | Show running system information |
| startup-config | Display the startup configuration |
| ipqos | show startup config for ipqosmgr |
| all | show startup config with defaults |
Command Modes
- /exec
show startup-config ipv6
show startup-config ipv6 [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| ipv6 | Display ipv6 information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config isis
show startup-config isis [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| isis | Display isis information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config l2pt
show startup-config l2pt [all]
Syntax Description
| show | Show system information |
| startup-config | System startup configuration |
| l2pt | Show startup configuration for L2PT |
| all | Show startup configuration for L2PT with defaults |
Command Modes
- /exec
show startup-config l3vm
show startup-config l3vm [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| l3vm | Display l3vm information |
| all | Display running config with defaults |
Command Modes
- /exec
show startup-config ldap
show startup-config ldap
Syntax Description
| show | show startup-cfg |
| startup-config | show startup system information |
| ldap | Display ldap configuration |
Command Modes
- /exec
show startup-config license
show startup-config license [all]
Syntax Description
| show | show startup-cfg |
| startup-config | show startup system information |
| license | Display licensing configuration |
| all | show startup config with defaults |
Command Modes
- /exec
show startup-config lldp
show startup-config lldp [all]
Syntax Description
| show | show startup-cfg |
| startup-config | show system startup configuration information |
| lldp | Display lldp configuration |
| all | show startup config with defaults |
Command Modes
- /exec
show startup-config log
show startup-config log
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| log | Displays execution log of last used ascii startup configuration |
Command Modes
- /exec
show startup-config monitor
show startup-config monitor
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| monitor | Configure Ethernet SPAN sessions |
Command Modes
- /exec
show startup-config msdp
show startup-config msdp [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| msdp | Display msdp information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config ntp
show startup-config ntp [all]
Syntax Description
| show | Show information |
| startup-config | Show startup system configuration |
| ntp | Show NTP information |
| all | Show all NTP startup configuration |
Command Modes
- /exec
show startup-config nv overlay
show startup-config nv overlay [all]
Syntax Description
| show | Show system information |
| startup-config | System startup configuration |
| nv | NVE startup configuration |
| overlay | NVE startup configuration |
| all | Show NVE config with defaults |
Command Modes
- /exec
show startup-config ospf
show startup-config ospf [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| ospf | Display ospf information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config ospfv3
show startup-config ospfv3 [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| ospfv3 | Display ospfv3 information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config pim
show startup-config pim [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| pim | Display pim information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config pim6
show startup-config pim6 [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| pim6 | Display pim6 information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config port-security
show startup-config port-security [all]
Syntax Description
| show | show startup-cfg |
| startup-config | show startup system information |
| port-security | Display port-security configuration |
| all | show running config with defaults |
Command Modes
- /exec
show startup-config radius
show startup-config radius
Syntax Description
| show | show startup-cfg |
| startup-config | show startup system information |
| radius | Display radius configuration |
Command Modes
- /exec
show startup-config rip
show startup-config rip [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| rip | Display rip information |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config routing multicast
show startup-config routing { ip | ipv4 } multicast [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| routing | Display routing information |
| ip | Display IP information |
| ipv4 | Display IP information |
| multicast | Display multicast information |
| all | Display startup config with defaults clis |
Command Modes
- /exec
show startup-config rpm
show startup-config rpm [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| rpm | Display Route Policy Manager (RPM) information |
| all | Display startup config with defaults |
Command Modes
- /exec
show startup-config rsvp
show startup-config rsvp
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| rsvp | Display RSVP status |
Command Modes
- /exec
show startup-config security
show startup-config security
Syntax Description
| show | show startup-cfg |
| startup-config | show startup system information |
| security | Display security configuration |
Command Modes
- /exec
show startup-config snmp
show startup-config snmp [all]
Syntax Description
| show | show startup-cfg |
| startup-config | show startup system information |
| snmp | Display snmp configuration |
| all | show running config with defaults |
Command Modes
- /exec
show startup-config tacacs+
show startup-config "tacacs+"
Syntax Description
| show | show startup-cfg |
| startup-config | show startup system information |
| tacacs+ | Display tacacs configuration |
Command Modes
- /exec
show startup-config track
show startup-config track
Syntax Description
| show | Show running system information |
| startup-config | Show the system startup configuration |
| track | Show the track startup configuration |
Command Modes
- /exec
show startup-config udld
show startup-config udld
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| udld | Show udld configuration |
Command Modes
- /exec
show startup-config vdc-all
show startup-config vdc-all
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| vdc-all | Display config from all VDC |
Command Modes
- /exec
show startup-config vdc
show startup-config vdc [all]
Syntax Description
| show | Show running system information |
| startup-config | Current saved configuration |
| vdc | Show Virtual Device Contexts |
| all | show startup config with defaults |
Command Modes
- /exec
show startup-config virtual-service
show startup-config virtual-service
Syntax Description
| show | Show running system information |
| startup-config | System startup-config commands |
| virtual-service | Show startup config for virtualization services |
Command Modes
- /exec
show startup-config vlan (clis)
show startup-config vlan
Syntax Description
| show | Show running system information |
| startup-config | System startup-config commands |
| vlan | Vlan commands |
Command Modes
- /exec
show startup-config vlan (clis)
show startup-config vlan vlan-id
Syntax Description
| show | Show running system information |
| startup-config | System startup-config commands |
| vlan | Vlan commands |
| vlan-id | Type: vlan-mrange VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19 |
Command Modes
- /exec
show startup-config vpc
show startup-config vpc [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| vpc | show startup config for vPC |
| all | show running config with defaults |
Command Modes
- /exec
show startup-config vrf
show startup-config vrf vrf-cfg-name [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| vrf | Display VRF information |
| vrf-cfg-name | Type: vrf antipattern: default Configurable VRF name |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config vrf default
show startup-config vrf default [all]
Syntax Description
| show | Show running system information |
| startup-config | Current startup configuration |
| vrf | Display VRF information |
| default | Known VRF name |
| all | Display running config with defaults clis |
Command Modes
- /exec
show startup-config vrrp
show startup-config vrrp
Syntax Description
| show | Show system information |
| startup-config | System startup configuration |
| vrrp | VRRP startup configuration |
Command Modes
- /exec
show startup-config vshd
show startup-config vshd
Syntax Description
| show | Show startup system information |
| startup-config | Current startup configuration |
| vshd | Show startup config for vshd |
Command Modes
- /exec
show startup-config vtp
show startup-config vtp [all]
Syntax Description
| show | Show running system information |
| startup-config | System startup-config commands |
| vtp | Show startup configuration for VTP |
| all | Show startup configuration for VTP with defaults |
Command Modes
- /exec
show summary
show { ip mbgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] | ip bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] all | ip bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] [ ipv4 [ unicast | multicast ] ] } summary [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ]
Syntax Description
| show | Show running system information |
| ip | Display IP information |
| bgp | Display BGP status and configuration |
| mbgp | Display MBGP status and configuration |
| vrf | Virtual Router Context |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known VRF name |
| ALL_VRFS_012345678901234 | All VRFs |
| summary | Display summarized information of BGP state |
| ipv4 | Display BGP information for IPv4 address family |
| unicast | Display BGP information for unicast address family |
| multicast | Display BGP information for multicast address family |
| all | Display BGP information for all address families |
Command Modes
- /exec
show system auto-collect tech-support
show system auto-collect tech-support
Syntax Description
| show | Show running system information |
| system | System management commands |
| auto-collect | Auto collection of information |
| tech-support | Collect tech-support in case of service causing supervisor reset |
Command Modes
- /exec
show system cores
show system cores [ __readonly__ content ]
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| cores | Displays core transfer option |
| __readonly__ | |
| content | Type: string Core transfer option |
Command Modes
- /exec
show system error-id
show system error-id { list | i0 } [ __readonly__ errorid facility desc ]
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| error-id | Show description about errors |
| list | Show description about all error IDs |
| i0 | Type: hex Show description about specific error |
| __readonly__ | |
| errorid | Type: string |
| facility | Type: string |
| desc | Type: string |
Command Modes
- /exec
show system exception-info
show system exception-info
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| exception-info | Show last exception log information |
Command Modes
- /exec
show system inband queuing
show system inband queuing { status | statistics } [ __readonly__ [ TABLE_sys_inband_queue_status pm-inband-weigh0 pm-inband-weigh1 pm-inband-weigh2 pm-inband-weigh3 pm-inband-weigh4 ] [ TABLE_sys_inband_queue_stats inband-pkt-unmap inband-pkt-bpdu-queue inband-pkt-map-q0 inband-pkt-map-q1 inband-pkt-map-q2 inband-pkt-map-q3 klm-pkt-map-bpdu klm-pkt-map-arp klm-pkt-map-q0 klm-pkt-map-q1 klm-pkt-map-q2 klm-pkt-map-q3 klm-pkt-map-veobc queue-name TABLE_bpdu_stats pm-recv-pkts pm-drop-pkts pm-congested rcvbuf sndbuf pm-no-drop TABLE_q_stats index-stat i-pm-recv-pkts i-pm-drop-pkts i-pm-congested i-rcvbuf i-sndbuf i-pm-no-drop ] ]
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| inband | Inband Commands |
| queuing | Inband Queuing commands |
| status | Selective Packet Discard Information |
| statistics | Inband statistics |
| __readonly__ | |
| TABLE_sys_inband_queue_status | system inband queue status |
| pm-inband-weigh0 | Type: integer |
| pm-inband-weigh1 | Type: integer |
| pm-inband-weigh2 | Type: integer |
| pm-inband-weigh3 | Type: integer |
| pm-inband-weigh4 | Type: integer |
| TABLE_sys_inband_queue_stats | system inband queue stats |
| inband-pkt-unmap | Type: longlong |
| inband-pkt-bpdu-queue | Type: longlong |
| inband-pkt-map-q0 | Type: longlong |
| inband-pkt-map-q1 | Type: longlong |
| inband-pkt-map-q2 | Type: longlong |
| inband-pkt-map-q3 | Type: longlong |
| klm-pkt-map-bpdu | Type: longlong |
| klm-pkt-map-arp | Type: longlong |
| klm-pkt-map-q0 | Type: longlong |
| klm-pkt-map-q1 | Type: longlong |
| klm-pkt-map-q2 | Type: longlong |
| klm-pkt-map-q3 | Type: longlong |
| klm-pkt-map-veobc | Type: longlong |
| queue-name | Type: string |
| TABLE_bpdu_stats | Bpdu statistics |
| pm-recv-pkts | Type: integer |
| pm-drop-pkts | Type: integer |
| pm-congested | Type: integer |
| rcvbuf | Type: integer |
| sndbuf | Type: integer |
| pm-no-drop | Type: integer |
| TABLE_q_stats | Bpdu Q statistics |
| index-stat | Type: integer |
| i-pm-recv-pkts | Type: integer |
| i-pm-drop-pkts | Type: integer |
| i-pm-congested | Type: integer |
| i-rcvbuf | Type: integer |
| i-sndbuf | Type: integer |
| i-pm-no-drop | Type: integer |
Command Modes
- /exec
show system kgdb
show system kgdb
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| kgdb | Displays state of kgdb_enable flag |
Command Modes
- /exec
show system pss shrink status
show system pss shrink status [details] [ __readonly__ [summary] [ TABLE_per_vdc vdc_id [ TABLE_detail_events service vdc event ] ] [ TABLE_events service vdc event ] ]
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| pss | Displays last pss shrink status |
| shrink | Displays last pss shrink status |
| status | Displays last pss shrink status |
| details | Displays last pss shrink status details |
| __readonly__ | |
| summary | Type: string PSS shrink summary |
| TABLE_per_vdc | |
| vdc_id | Type: string VDC id |
| TABLE_detail_events | PSS shrink events |
| service | Type: string Service name |
| vdc | Type: integer VDC number |
| event | Type: string PSS evnets |
| TABLE_events | PSS shrink events |
| service | Type: string Service name |
| vdc | Type: integer VDC number |
| event | Type: string PSS evnets |
Command Modes
- /exec
show system redundancy ha status
show system redundancy ha status [ __readonly__ [ TABLE_ha_status vdc_id this_sup_internal_state other_sup_internal_state ] ]
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| redundancy | redundancy status |
| ha | vdc redundancy status |
| status | all vdc redundancy status |
| __readonly__ | |
| TABLE_ha_status | HA status for all vdcs |
| vdc_id | Type: string vdc id |
| this_sup_internal_state | Type: string This Supervisor State |
| other_sup_internal_state | Type: string Remote Supervisor State |
Command Modes
- /exec
show system redundancy status
show system redundancy status [ __readonly__ rdn_mode_admin rdn_mode_oper this_sup this_sup_rdn_state this_sup_sup_state this_sup_internal_state [other_sup] [other_sup_rdn_state] [other_sup_sup_state] [other_sup_internal_state] ]
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| redundancy | redundancy status |
| status | Current redundancy status |
| __readonly__ | readonly |
| rdn_mode_admin | Type: string Redundancy Mode Admin |
| rdn_mode_oper | Type: string Redundancy Mode Operational |
| this_sup | Type: string This Supervisor |
| this_sup_rdn_state | Type: string Redundancy State |
| this_sup_sup_state | Type: string Supervisor State |
| this_sup_internal_state | Type: string Supervisor State |
| other_sup | Type: string Other Supervisor |
| other_sup_sup_state | Type: string Supervisor State |
| other_sup_rdn_state | Type: string Redundancy tate |
| other_sup_internal_state | Type: string Supervisor State |
Command Modes
- /exec
show system reset-reason (lcmcli)
show system reset-reason s0 santa-cruz-range [ __readonly__ TABLE_xbarreason slot TABLE_rr time reason service version ]
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| reset-reason | Show last reset reason |
| s0 | Type: xbar-str Show xbar module reset reason |
| santa-cruz-range | Type: integer-range please enter the xbar module number |
| __readonly__ | |
| TABLE_xbarreason | Reset reason info |
| slot | Type: string slot |
| TABLE_rr | reset reason |
| time | Type: string time |
| reason | Type: string reset reason |
| service | Type: string service name |
| version | Type: string version |
Command Modes
- /exec
show system reset-reason (lcmcli)
show system reset-reason [ __readonly__ TABLE_reason slot TABLE_rr time reason service version ]
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| reset-reason | Show last reset reason |
| __readonly__ | |
| TABLE_reason | Reset reason info |
| slot | Type: string slot |
| TABLE_rr | reset reason |
| time | Type: string time |
| reason | Type: string reset reason |
| service | Type: string service name |
| version | Type: string version |
Command Modes
- /exec
show system reset-reason fex
show system reset-reason fex i
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| reset-reason | Show last reset reason |
| fex | Show fex last reset reason |
| i | Type: integer min: 100 max: 199 Enter FEX identifier |
Command Modes
- /exec
show system reset-reason module
show system reset-reason module module [ __readonly__ TABLE_reason slot TABLE_rr time reason service version ]
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| reset-reason | Show last reset reason |
| module | Show per module reset-reason code |
| module | Type: integer-range please enter module number |
| __readonly__ | |
| TABLE_reason | Reset reason info |
| slot | Type: string slot |
| TABLE_rr | reset reason |
| time | Type: string time |
| reason | Type: string reset reason |
| service | Type: string service name |
| version | Type: string version |
Command Modes
- /exec
show system resources (process)
show system resources i0
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| resources | Show system resources |
| i0 | Type: integer min: 1 max: 60 time interval in seconds |
Command Modes
- /exec
show system resources (process)
show system resources [ __readonly__ [load_avg_1min] [load_avg_5min] [load_avg_15min] [processes_total] [processes_running] [cpu_state_user] [cpu_state_kernel] [cpu_state_idle] [ TABLE_cpu_usage cpuid user kernel idle ] [memory_usage_total] [memory_usage_used] [memory_usage_free] [current_memory_status] ]
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| resources | Show system resources |
| __readonly__ | |
| TABLE_cpu_usage | All Cpu Usage Information |
| load_avg_1min | Type: float Load Average 1 Min |
| load_avg_5min | Type: float Load Average 5 Min |
| load_avg_15min | Type: float Load Average 15 Min |
| processes_total | Type: integer Total processes |
| processes_running | Type: integer Running Processes |
| cpu_state_user | Type: float CPU State User |
| cpu_state_kernel | Type: float CPU State Kernel |
| cpu_state_idle | Type: float CPU State Idle |
| cpuid | Type: integer CPU id |
| user | Type: float user time |
| kernel | Type: float kernel time |
| idle | Type: float idle time |
| memory_usage_total | Type: uinteger Memory Usage Total |
| memory_usage_used | Type: uinteger Memory Usage Used |
| memory_usage_free | Type: uinteger Memory Usage Free |
| current_memory_status | Type: string Current Memory Status |
Command Modes
- /exec
show system resources module
show system resources [i0] module i1
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| resources | Show system resources |
| i0 | Type: integer min: 1 max: 60 time interval in seconds |
| module | Show system resources for specified module |
| i1 | Type: integer min: 1 max: 18 module number |
Command Modes
- /exec
show system resources module all
show system resources [i0] module all
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| resources | Show system resources |
| i0 | Type: integer min: 1 max: 60 time interval in seconds |
| module | Show system resources for specified module |
| all | Show system resources for all modules |
Command Modes
- /exec
show system routing mode
show system routing mode [ __readonly__ TABLE_system_routing_mode system-routing-mode-desc ]
Syntax Description
| show | Show running system information |
| system | Show system information |
| routing | Show routing related information |
| mode | Show mode related information |
| __readonly__ | |
| TABLE_system_routing_mode | the xml system_routing_mode configuration |
| system-routing-mode-desc | Type: string system routing mode description |
Command Modes
- /exec
show system srg
show system srg
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| srg | Displays the system SRG |
Command Modes
- /exec
show system standby manual-boot
show system standby manual-boot [ __readonly__ content ]
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| standby | Displays system standby manual boot option |
| manual-boot | Displays system standby manual boot option |
| __readonly__ | |
| content | Type: string Displays system standby manual boot option |
Command Modes
- /exec
show system switchover impact
show system switchover impact [ uri0 [uri1] ]
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| switchover | Show the software switchover impact between two images |
| impact | impact {standby_system_uri} {active_system_uri} |
| uri0 | Type: uri Enter standby URI |
| uri1 | Type: uri Enter active URI |
Command Modes
- /exec
show system uptime
show system uptime [ __readonly__ sys_st_time sys_up_days sys_up_hrs sys_up_mins sys_up_secs kn_up_days kn_up_hrs kn_up_mins kn_up_secs [as_up_days] [as_up_hrs] [as_up_mins] [as_up_secs] ]
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| uptime | Show how long the system has been up and running |
| __readonly__ | readonly |
| sys_st_time | Type: string System Start Time |
| sys_up_days | Type: integer System Uptime Days |
| sys_up_hrs | Type: integer System Uptime Hours |
| sys_up_mins | Type: integer System Uptime Minutes |
| sys_up_secs | Type: integer System Uptime Seconds |
| kn_up_days | Type: integer Kernel Uptime Days |
| kn_up_hrs | Type: integer Kernel Uptime Hours |
| kn_up_mins | Type: integer Kernel Uptime Minutes |
| kn_up_secs | Type: integer Kernel Uptime Seconds |
| as_up_days | Type: integer Active Sup Uptime Days |
| as_up_hrs | Type: integer Active Sup Uptime Hours |
| as_up_mins | Type: integer Active Sup Uptime Minutes |
| as_up_secs | Type: integer Active Sup Uptime Seconds |
Command Modes
- /exec
show system verify bios
show system verify bios { flash i0 [ module module ] | protection i1 [ module1 module1 ] }
Syntax Description
| show | Show running system information |
| system | System-related show commands |
| verify | Verify commands |
| bios | Verify bios |
| flash | verify bios flash or protection status |
| i0 | Type: integer min: 0 max: 1 Select primary or alternate flash |
| module | Module number |
| module | Type: integer-range Enter module number |
| protection | verify bios flash or protection status |
| i1 | Type: integer min: 0 max: 1 Select primary or alternate flash |
| module1 | Module number |
| module1 | Type: integer-range Enter module number |
Command Modes
- /exec
show system vlan reserved
show system vlan reserved [ __readonly__ TABLE_vlan current_reserved_vlan_start current_reserved_vlan_end future_reserved_vlan_start future_reserved_vlan_end ]
Syntax Description
| show | Show running system information |
| system | system wide configuration |
| vlan | VLAN status |
| reserved | Show system VLAN allocation |
| __readonly__ | Read Only |
| TABLE_vlan | |
| current_reserved_vlan_start | Type: uinteger System current running reserved vlan start |
| current_reserved_vlan_end | Type: uinteger System current running reserved vlan end |
| future_reserved_vlan_start | Type: uinteger System future running reserved vlan start |
| future_reserved_vlan_end | Type: uinteger System future running reserved vlan end |
Command Modes
- /exec
Feedback