show callhome
show callhome destination-profile
show callhome destination-profile profile
show callhome destination-profile profile CiscoTAC-1
show callhome destination-profile profile full-txt-destination
show callhome destination-profile profile short-txt-destination
show callhome transport
show callhome transport-email
show callhome user-def-cmds
show cdp (cdpd)
show cdp (cdpd)
show cdp global
show cdp neighbors
show cdp neighbors detail
show cdp traffic interface2
show cfs application
show cfs lock
show cfs merge status
show cfs peers
show cfs regions
show cfs remote-app vsan domain
show cfs remote-switches vsan
show cfs static peers
show cfs status
show checkpoint (cfg_rollback)
show checkpoint (cfg_rollback)
show checkpoint summary
show class-map
show class-map type control-plane
show class-map type network-qos
show cli alias
show cli dynamic integers
show cli dynamic strings
show cli history
show cli interface table
show cli list
show cli registry
show cli syntax
show cli variables
show clock
show clock utc
show configuration session (ssnmgr)
show configuration session (ssnmgr)
show configuration session global-info
show configuration session status
show configuration session summary
show consistency-checker forwarding ipv6show forwarding ipv6 inconsistency
show consistency-checker forwardingshow forwarding inconsistency
show consistency-checker racl port-channels
show copp diff profile profile2
show copp profile
show copp status
show copyright
show cores
show crypto ca certificates (certen_tree)
show crypto ca certificates (certen_tree)
show crypto ca certstore
show crypto ca crl
show crypto ca remote-certstore
show crypto ca trustpoints
show crypto certificatemap
show crypto key mypubkey rsa
show crypto ssh-auth-map
show current

C Show Commands

show callhome
show callhome destination-profile
show callhome destination-profile profile
show callhome destination-profile profile CiscoTAC-1
show callhome destination-profile profile full-txt-destination
show callhome destination-profile profile short-txt-destination
show callhome transport
show callhome transport-email
show callhome user-def-cmds
show cdp (cdpd)
show cdp (cdpd)
show cdp global
show cdp neighbors
show cdp neighbors detail
show cdp traffic interface2
show cfs application
show cfs lock
show cfs merge status
show cfs peers
show cfs regions
show cfs remote-app vsan domain
show cfs remote-switches vsan
show cfs static peers
show cfs status
show checkpoint (cfg_rollback)
show checkpoint (cfg_rollback)
show checkpoint summary
show class-map
show class-map type control-plane
show class-map type network-qos
show cli alias
show cli dynamic integers
show cli dynamic strings
show cli history
show cli interface table
show cli list
show cli registry
show cli syntax
show cli variables
show clock
show clock utc
show configuration session (ssnmgr)
show configuration session (ssnmgr)
show configuration session global-info
show configuration session status
show configuration session summary
show consistency-checker forwarding ipv6show forwarding ipv6 inconsistency
show consistency-checker forwardingshow forwarding inconsistency
show consistency-checker racl port-channels
show copp diff profile profile2
show copp profile
show copp status
show copyright
show cores
show crypto ca certificates (certen_tree)
show crypto ca certificates (certen_tree)
show crypto ca certstore
show crypto ca crl
show crypto ca remote-certstore
show crypto ca trustpoints
show crypto certificatemap
show crypto key mypubkey rsa
show crypto ssh-auth-map
show current

show callhome

show callhome [ __readonly__ output_state info per_name [name] email_info [email_conf] ph_info [ph_conf] str_addr [str_conf] site_id [site_id_conf] cust_id [cus_id_conf] contr_id [contr_id_conf] swi_pri [swi_pri_value] dup_mess per_inv per_time per_timeofday dist ]

Syntax Description

show	Show running system information
callhome	Show callhome information
__readonly__
output_state	Type: string
info	Type: string
per_name	Type: string
name	Type: string
email_info	Type: string
email_conf	Type: string
ph_info	Type: string
ph_conf	Type: string
str_addr	Type: string
str_conf	Type: string
site_id	Type: string
site_id_conf	Type: string
cust_id	Type: string
cus_id_conf	Type: string
contr_id	Type: string
contr_id_conf	Type: string
swi_pri	Type: string
swi_pri_value	Type: string
dup_mess	Type: string
per_inv	Type: string
per_time	Type: string
per_timeofday	Type: string
dist	Type: string

Command Modes

/exec

show callhome destination-profile

show callhome destination-profile [ __readonly__ TABLE_call_info [dest_full_info] [dest_short_info] [dest_xml_info] [dest_def_info] max_mess_size mess_format mess_level trans_method email_info [email_conf] url_info [url_conf] alert_groups [alert_conf] ]

Syntax Description

show	Show running system information
callhome	Show callhome information
destination-profile	Show callhome destination profile information
__readonly__
TABLE_call_info
dest_full_info	Type: string
dest_short_info	Type: string
dest_xml_info	Type: string
dest_def_info	Type: string
max_mess_size	Type: string
mess_format	Type: string
mess_level	Type: string
trans_method	Type: string
email_info	Type: string
email_conf	Type: string
url_info	Type: string
url_conf	Type: string
alert_groups	Type: string
alert_conf	Type: string

Command Modes

/exec

show callhome destination-profile profile

show callhome destination-profile profile s0 [ __readonly__ user_txt_info max_mess_size mess_format mess_level trans_method email_info [ TABLE_email [email_conf] ] url_info [ TABLE_url [url_conf] ] alert_groups [ TABLE_alert [alert_conf] ] ]

Syntax Description

show	Show running system information
callhome	Show callhome information
destination-profile	Show callhome destination profile information
profile	Specify the destination profile
s0	Type: string length: 32 Show information for user defined destination profile
__readonly__
user_txt_info	Type: string
max_mess_size	Type: string
mess_format	Type: string
mess_level	Type: string
trans_method	Type: string
email_info	Type: string
TABLE_email
email_conf	Type: string
url_info	Type: string
TABLE_url
url_conf	Type: string
alert_groups	Type: string
TABLE_alert
alert_conf	Type: string

Command Modes

/exec

show callhome destination-profile profile CiscoTAC-1

show callhome destination-profile profile CiscoTAC-1 [ __readonly__ tac_xml_info max_mess_size mess_level trans_method email_info [email_conf] url_info [url_conf] alert_groups [alert_conf] ]

Syntax Description

show	Show running system information
callhome	Show callhome information
destination-profile	Show callhome destination profile information
profile	Specify the destination profile
CiscoTAC-1	Show information for CiscoTAC-1 destination profile
__readonly__
tac_xml_info	Type: string
max_mess_size	Type: string
mess_level	Type: string
trans_method	Type: string
email_info	Type: string
email_conf	Type: string
url_info	Type: string
url_conf	Type: string
alert_groups	Type: string
alert_conf	Type: string

Command Modes

/exec

show callhome destination-profile profile full-txt-destination

show callhome destination-profile profile full-txt-destination [ __readonly__ full_txt_info max_mess_size mess_level trans_method email_info [email_conf] url_info [url_conf] alert_groups [alert_conf] ]

Syntax Description

show	Show running system information
callhome	Show callhome information
destination-profile	Show callhome destination profile information
profile	Specify the destination profile
full-txt-destination	Show information for full-txt-destination destination profile
__readonly__
full_txt_info	Type: string
max_mess_size	Type: string
mess_level	Type: string
trans_method	Type: string
email_info	Type: string
email_conf	Type: string
url_info	Type: string
url_conf	Type: string
alert_groups	Type: string
alert_conf	Type: string

Command Modes

/exec

show callhome destination-profile profile short-txt-destination

show callhome destination-profile profile short-txt-destination [ __readonly__ shrt_txt_info max_mess_size mess_level trans_method email_info [email_conf] url_info [url_conf] alert_groups [alert_conf] ]

Syntax Description

show	Show running system information
callhome	Show callhome information
destination-profile	Show callhome destination profile information
profile	Specify the destination profile
short-txt-destination	Show information for short-txt-destination destination profile
__readonly__
shrt_txt_info	Type: string
max_mess_size	Type: string
mess_level	Type: string
trans_method	Type: string
email_info	Type: string
email_conf	Type: string
url_info	Type: string
url_conf	Type: string
alert_groups	Type: string
alert_conf	Type: string

Command Modes

/exec

show callhome transport

show callhome transport [ __readonly__ vrf from_email [rep_email] [ret_email] [smtp_ser] [smtp_ser_port] [smtp_ser_vrf] [smtp_ser_prior] [smtp_ser_do] [smtp_ser_port_do] [smtp_ser_vrf_do] [smtp_ser_prior_do] [smtp_ser_got] [smtp_ser_port_got] [smtp_ser_vrf_got] [smtp_ser_prior_got] http_prox http_port http_state ]

Syntax Description

show	Show running system information
callhome	Show callhome information
transport	Show callhome transport configuration (email and http)
__readonly__
vrf	Type: string
from_email	Type: string
rep_email	Type: string
ret_email	Type: string
smtp_ser	Type: string
smtp_ser_port	Type: string
smtp_ser_vrf	Type: string
smtp_ser_prior	Type: string
smtp_ser_do	Type: string
smtp_ser_port_do	Type: string
smtp_ser_vrf_do	Type: string
smtp_ser_prior_do	Type: string
smtp_ser_got	Type: string
smtp_ser_port_got	Type: string
smtp_ser_vrf_got	Type: string
smtp_ser_prior_got	Type: string
http_prox	Type: string
http_port	Type: string
http_state	Type: string

Command Modes

/exec

show callhome transport-email

show callhome transport-email

Syntax Description

show	Show running system information
callhome	Show callhome information
transport-email	Show callhome email transport configuration

Command Modes

/exec

show callhome user-def-cmds

show callhome user-def-cmds

Syntax Description

show	Show running system information
callhome	Show callhome information
user-def-cmds	Show the cli commands configured for each alert group

Command Modes

/exec

show cdp (cdpd)

show cdp { all | interface if0 } [ __readonly__ TABLE_cdp_all intf_id port_up [cdp_global_enabled] cdp_intf_enabled [oper_mode] refresh_time ttl ]

Syntax Description

show	Show running system information
cdp	Show Cisco Discovery Protocol information
all	Show all interfaces in CDP database
interface	Show CDP parameters for an interface
if0	Type: interface
__readonly__	Read only
TABLE_cdp_all	output of show cdp all
intf_id	Type: string Interface Id
port_up	Type: string Port status
cdp_global_enabled	Type: string CDP global status
cdp_intf_enabled	Type: string CDP interface status
oper_mode	Type: string CDP operation mode
refresh_time	Type: string Refresh Time
ttl	Type: string Hold Time

Command Modes

/exec

show cdp (cdpd)

show cdp entry { all1 | name s0 } [ __readonly__ TABLE_cdp_entry_all [ifindex] device_id [sysname] { v4addr | v6addr } + platform_id capability+ intf_id port_id ttl version version_no [nativevlan] [vtpname] [duplexmode] [syslocation] { v4mgmtaddr | v6mgmtaddr } + ]

Syntax Description

show	Show running system information
cdp	Show Cisco Discovery Protocol information
entry	Show CDP entries in database
all1	Show all CDP entries in database
name	Show a specific CDP entry matching a name
s0	Type: string length: 256
__readonly__	Read only
TABLE_cdp_entry_all	output of show cdp entry all
ifindex	Type: string Interface Index
device_id	Type: string Device Identifier
sysname	Type: string System Name
v4addr	Type: string Interface IP V4 Address
v6addr	Type: string Interface IP V6 Address
platform_id	Type: string Platform Id
capability	Type: string Capability
intf_id	Type: string Interface Id
port_id	Type: string Port Identifier
ttl	Type: string Hold Time
version	Type: string Software Version
version_no	Type: string CDP version number
nativevlan	Type: string NativeVLAN
vtpname	Type: string Vtp Management Domain Name
duplexmode	Type: string Duplex Mode
syslocation	Type: string System Location
v4mgmtaddr	Type: string IP V4 Mgmt Address
v6mgmtaddr	Type: string IP V6 Mgmt Address

Command Modes

/exec

show cdp global

show cdp global [ __readonly__ cdp_global_enabled refresh_time ttl v2_advertisement deviceid_format ]

Syntax Description

show	Show running system information
cdp	Show Cisco Discovery Protocol information
global	Show CDP global parameters
__readonly__	Read only
cdp_global_enabled	Type: string CDP global status
refresh_time	Type: string Refresh Time
ttl	Type: string Hold Time
v2_advertisement	Type: string Show v2 advertisement
deviceid_format	Type: string Show deviceId Format

Command Modes

/exec

show cdp neighbors

show cdp neighbors [ interface if ] [ __readonly__ TABLE_cdp_neighbor_brief_info ifindex device_id intf_id ttl capability+ platform_id port_id ]

Syntax Description

show	Show running system information
cdp	Show Cisco Discovery Protocol information
neighbors	Show CDP neighbors
interface	Show CDP neighbors on an interface
if	Type: interface-mrange
__readonly__	Read only
TABLE_cdp_neighbor_brief_info	output of show cdp neighbor - in breif
ifindex	Type: uinteger Interface index
device_id	Type: string System Name (or) Device Identifier
intf_id	Type: string Interface Id
port_id	Type: string Port Identifier
platform_id	Type: string Platform Id
ttl	Type: uinteger Hold Time
capability	Capability router value: 1 performing level-3 routing tb-bridge value: 2 performing level-2 transparent bridging sr-bridge value: 3 performing level-2 source route bridging switch value: 4 Provides layer-2 and/or layer-3 switching host value: 5 Host IGMP_cnd_filtering value: 6 IGMP conditional filtering Repeater value: 7 Provides level-1 functionality VoIP_Phone value: 8 Provides voice or data telephony capability Remotely_managed-device value: 9 Remotely-Managed Device Supports-STP-Dispute value: 10 Supports-STP-Dispute

Command Modes

/exec

show cdp neighbors detail

show cdp neighbors [ interface if ] detail [ __readonly__ TABLE_cdp_neighbor_detail_info ifindex device_id [sysname] [vtpname] numaddr { v4addr | v6addr } + platform_id capability+ intf_id port_id ttl version version_no [nativevlan] [duplexmode] [mtu] [syslocation] [ num_mgmtaddr { v4mgmtaddr | v6mgmtaddr } + ] ]

Syntax Description

show	Show running system information
cdp	Show Cisco Discovery Protocol information
neighbors	Show CDP neighbors
detail	Show CDP neighbors detailed
interface	Show CDP neighbors on an interface
if	Type: interface-mrange
__readonly__	Read only
TABLE_cdp_neighbor_detail_info	output of show cdp neighbor detail
ifindex	Type: uinteger Interface index
device_id	Type: string Device Identifier
sysname	Type: string System Name
vtpname	Type: string Vtp Management Domain Name
numaddr	Type: uinteger No of IP Address configured
v4addr	Type: ipaddr Interface IP V4 Address
v6addr	Type: ipv6addr Interface IP V6 Address
platform_id	Type: string Platform Id
capability	Capability router value: 1 performing level-3 routing tb-bridge value: 2 performing level-2 transparent bridging sr-bridge value: 3 performing level-2 source route bridging switch value: 4 Provides layer-2 and/or layer-3 switching host value: 5 Host IGMP_cnd_filtering value: 6 IGMP conditional filtering Repeater value: 7 Provides level-1 functionality VoIP_Phone value: 8 Provides voice or data telephony capability Remotely_managed-device value: 9 Remotely-Managed Device Supports-STP-Dispute value: 10 Supports-STP-Dispute
intf_id	Type: string Interface Id
port_id	Type: string Port Identifier
ttl	Type: uinteger Hold Time
version	Type: string Software Version
version_no	CDP version number v1 value: 1 CDP version 1 v2 value: 2 CDP version 2
nativevlan	Type: uinteger NativeVLAN
duplexmode	Duplex Mode half value: 1 half duplex mode full value: 2 full duplex mode
mtu	Type: uinteger MTU
syslocation	Type: string System Location
num_mgmtaddr	Type: uinteger No of Mgmt Address configured
v4mgmtaddr	Type: ipaddr IP V4 Mgmt Address
v6mgmtaddr	Type: ipv6addr IP V6 Mgmt Address

Command Modes

/exec

show cdp traffic interface2

show cdp traffic interface2 if2 [ __readonly__ intf_id total_input_packets valid_cdp_packets input_v1_packets input_v2_packets invalid_cdp_packets unsupported_version checksum_errors malformed_packets total_output_packets output_v1_packets output_v2_packets send_errors ]

Syntax Description

show	Show running system information
cdp	Show Cisco Discovery Protocol information
traffic	Show CDP traffic statistics
interface2	Show CDP traffic statistics on an interface
if2	Type: interface
__readonly__	Read only
TABLE_cdp_traffic	output of show cdp traffic
intf_id	Type: string Interface Id
total_input_packets	Type: string Total input cdp packets
valid_cdp_packets	Type: string Total valid cdp packets
input_v1_packets	Type: string Input vesrion1 packets
input_v2_packets	Type: string Input vesrion2 packets
invalid_cdp_packets	Type: string Invalid cdp packets
unsupported_version	Type: string Packets having unsupported version
checksum_errors	Type: string Packets having checksum errors
malformed_packets	Type: string Total malformed packets
total_output_packets	Type: string Total output packets
output_v1_packets	Type: string Output vesrion1 packets
output_v2_packets	Type: string Output vesrion2 packets
send_errors	Type: string Number of send errors

Command Modes

/exec

show cfs application

show cfs application [ name cfs-dyn-app-name | sap i0 ] [ __readonly__ [ enabled enabled timeout timeout merge_capable merge_capable scope scope region region ] [ TABLE_apps app_name app_enabled app_scope ] ]

Syntax Description

show	Show running system information
cfs	CFS Show Command handler
application	Show locally registered applications
name	Show local application information by name
cfs-dyn-app-name	Type: string length: 60 Registered name of the local application
sap	Show local application information by sap
i0	Type: integer Registered sap of the local application
__readonly__
enabled	whether application is CFS enabled
enabled	Type: string whether application is CFS enabled
timeout	timeout
timeout	Type: string timeout
merge_capable	merge_capable
merge_capable	Type: string merge_capable
scope	scope
scope	Type: string scope
region	region
region	Type: string region
TABLE_apps	all cfs applications
app_name	Type: string name of cfs application
app_enabled	Type: string whether application is cfs enabled
app_scope	Type: string distribution scope of cfs application

Command Modes

/exec

show cfs lock

show cfs lock [ name cfs-dyn-app-name | sap i1 ] [ __readonly__ [ TABLE_locks [app_name] app_scope [vsan] [domain] [wwn] ip_addr u_name u_type [hostname] ] ]

Syntax Description

show	Show running system information
cfs	CFS Show Command handler
lock	Show state of application's logical/physical locks
name	Application name for which the lock status is required
cfs-dyn-app-name	Type: string length: 60 Registered name of the local application
sap	Application sap for which the lock status is required
i1	Type: integer Application SAP
__readonly__
TABLE_locks	table of all CFS locks
app_name	Type: string name of CFS application
app_scope	Type: string scope of CFS application
vsan	Type: string vsan
domain	Type: string domain
wwn	Type: string wwn of switch holding CFS lock
ip_addr	Type: string ip address of switch holding CFS lock
u_name	Type: string user name
u_type	Type: string user type
hostname	Type: string hostname

Command Modes

/exec

show cfs merge status

show cfs merge status [ name cfs-dyn-app-name [detail] | sap i1 [detail2] ] [ __readonly__ [ scope scope ] [ merge_status status ] [ failure_reason reason ] [ TABLE_all_merge app_name scope vsan status ] [ TABLE_local_fabric [domain] wwn ip_addr app_scope [master] [hostname] ] [ TABLE_remote_fabric [domain] wwn ip_addr app_scope [master] [hostname] ] [ TABLE_remaining_fabric [domain] wwn ip_addr [hostname] ] ]

Syntax Description

show	Show running system information
cfs	CFS Show Command handler
merge	Show cfs merge information
status	Show status of merge
name	Show merge status by name
cfs-dyn-app-name	Type: string length: 60 Registered name of the local application
detail	Show merge status by name in detail
sap	Show merge status by sap
i1	Type: integer Application sap
detail2	Show merge status by sap in detail
__readonly__
scope	distribution scope of application
scope	Type: string scope
merge_status	status
status	Type: string status
failure_reason	reason
reason	Type: string reason
TABLE_all_merge	all
app_name	Type: string name
scope	Type: string scope
vsan	Type: string vsan
status	Type: string status
TABLE_local_fabric	local fabric
domain	Type: string domain
wwn	Type: string wwn
ip_addr	Type: string ip_addr
app_scope	Type: string scope
master	Type: string master
hostname	Type: string hname
TABLE_remote_fabric	remote fabric
domain	Type: string domain
wwn	Type: string wwn
ip_addr	Type: string ip_addr
app_scope	Type: string scope
master	Type: string master
hostname	Type: string hname
TABLE_remaining_fabric	remote fabric
domain	Type: string domain
wwn	Type: string wwn
ip_addr	Type: string ip_addr
hostname	Type: string hname

Command Modes

/exec

show cfs peers

show cfs peers [ name cfs-dyn-app-name | sap i1 ] [ __readonly__ [ scope scope ] [ TABLE_peers wwn ip_addr local [hostname] [domain] ] ]

Syntax Description

show	Show running system information
cfs	CFS Show Command handler
peers	Show all the peers in the physical fabric
name	Show peers for given application name
cfs-dyn-app-name	Type: string length: 60 Registered name of the local application
sap	Show peers for given application sap
i1	Type: integer Application sap
__readonly__
scope	scope
scope	Type: string scope
TABLE_peers	all peers
wwn	Type: string wwn
ip_addr	Type: string ip_addr
local	Type: string local
hostname	Type: string hname
domain	Type: string domain

Command Modes

/exec

show cfs regions

show cfs regions [ brief [ region i0 ] | name cfs-dyn-app-name | region1 i1 ] [ __readonly__ [ region id ] [ application name ] [ scope scope ] [ TABLE_PEERS wwn ip_addr local [hostname] [domain] ] [ TABLE_switches [wwn] [ip_addr] region app_name enabled [scope] ] ]

Syntax Description

show	Show running system information
cfs	CFS Show Command handler
regions	Show all the applications with peers and region information
brief	Show all configured regions and applications(no peers)
region	Show all configured applications(no peers)
i0	Type: integer min: 1 max: 200 Region Id
name	Show peers and region information for a given application
cfs-dyn-app-name	Type: string length: 60 Registered name of the local application
region1	Show all configured applications with peers
i1	Type: integer min: 1 max: 200 Region Id
__readonly__
region	region
id	Type: string id
application	app
name	Type: string name
scope	scope
scope	Type: string scope
TABLE_PEERS	all region peers
wwn	Type: string wwn
ip_addr	Type: string ip_address
local	Type: string local
hostname	Type: string hname
domain	Type: string domain
TABLE_switches	all switches in region
wwn	Type: string wwn
ip_addr	Type: string ip_addr
region	Type: string region
app_name	Type: string name
enabled	Type: string enabled
scope	Type: string scope

Command Modes

/exec

show cfs remote-app vsan domain

show cfs remote-app vsan i0 domain i1

Syntax Description

show	Show running system information
cfs	CFS Show Command handler
remote-app	Show remote cfs registered applications
vsan	Show remote applications given a vsan
i0	Type: integer min: 1 max: 4093 VSAN id
domain	Show remote applications
i1	Type: integer min: 0 max: 255 Enter the domain id

Command Modes

/exec

show cfs remote-switches vsan

show cfs remote-switches vsan i0 [ __readonly__ local domain [ TABLE_switches remote_domain wwn ] ]

Syntax Description

show	Show running system information
cfs	CFS Show Command handler
remote-switches	Show remote switches on a given vsan
vsan	Show remote switches on a given vsan
i0	Type: integer min: 1 max: 4093 VSAN id
__readonly__
local	local
domain	Type: string domain
TABLE_switches	all remote switches
remote_domain	Type: string rdomain
wwn	Type: string wwn

Command Modes

/exec

show cfs static peers

show cfs static peers

Syntax Description

show	Show running system information
cfs	CFS Show Command handler
static	Show all static peers with status
peers	Show all configured static peers with status

Command Modes

/exec

show cfs status

show cfs status [ __readonly__ distribution distribution distribution_over_ip dist_over_ip ipv4_multicast_address ipv4_mcast_addr ipv6_multicast_address ipv6_mcast_addr distribution_over_ethernet dist_over_eth ]

Syntax Description

show	Show running system information
cfs	CFS Show Command handler
status	Show current status of CFS
__readonly__
distribution	runtime status of CFS distribution
distribution	Type: string operational status of CFS distribution
distribution_over_ip	runtime information of CFSoIP
dist_over_ip	Type: string operational status of CFS overIP
ipv4_multicast_address	ipv4 multicast address
ipv4_mcast_addr	Type: string ipv4 multicast address
ipv6_multicast_address	ipv6 multicast address
ipv6_mcast_addr	Type: string ipv6 multicast address
distribution_over_ethernet	runtime status if CFSoE
dist_over_eth	Type: string operations status of CFSoE

Command Modes

/exec

show checkpoint (cfg_rollback)

show checkpoint chkpoint_name [all] [ __readonly__ TABLE_checkpoint_details name1 checkpoint_config+ ]

Syntax Description

show	Show running system information
checkpoint	Show configuration rollback checkpoint contents
chkpoint_name	Type: string length: 80 Checkpoint name
all	Show default config
__readonly__	Read only
TABLE_checkpoint_details	Checkpoint details
name1	Type: string length: 80 Checkpoint name
checkpoint_config	Type: string length: 255 Configuration entry from checkpoint

Command Modes

/exec

show checkpoint (cfg_rollback)

show checkpoint [all] [ user | system ] [ __readonly__ TABLE_checkpoint_details name checkpoint_config+ ]

Syntax Description

show	Show running system information
checkpoint	Show configuration rollback checkpoints
all	Show default config
user	Show only user configuration rollback checkpoints
system	Show only system configuration rollback checkpoints
__readonly__	Read only
TABLE_checkpoint_details	checkpoint details
name	Type: string length: 80 Checkpoint name
checkpoint_config	Type: string length: 255 Configuration entry from checkpoint

Command Modes

/exec

show checkpoint summary

show checkpoint summary [ user | system ] [ __readonly__ TABLE_checkpoint_header_info name user_name timestamp file_path chkpt_type description ]

Syntax Description

show	Show running system information
checkpoint	Show configuration rollback checkpoints
summary	Show configuration rollback checkpoints summary
user	Show only user configuration rollback checkpoints summary
system	Show only system configuration rollback checkpoints summary
__readonly__	Read only
TABLE_checkpoint_header_info	Checkpoint header info
user_name	Type: string length: 31 Username
name	Type: string length: 80 Checkpoint name
file_path	Type: string length: 128 Checkpoint name
timestamp	Type: integer Timestamp of checkpoint creation
chkpt_type	Type: integer Type of checkpoint either user or system
description	Type: remainder Checkpoint description

Command Modes

/exec

show class-map

show class-map [ [ type qos ] [ cmap-name | xxx color-map-enum-name ] | type queuing [ yyy cmap-enum-name | zzz default-cmap-enum-name | cmap-dce-name | cmap-name-hque ] ] [ __readonly__ [display-all] [ TABLE_cmap cmap-key [id] xqos-or-q [any_or_all] cmap-name-out [desc] [ TABLE_match match-key [not] [dscp-list] [precedence-list] [cos-list] [qos-group-list] [discard-class-list] [vlan-list] [match-cmap-name] [match-acl-name] [note-string] [pkt-len-list] [rtp-port-list] [prot] [input-iface-list] [exp-list] ] ] ]

Syntax Description

xxx	xxx Not available in this release.
yyy	yyy Not available in this release.
zzz	zzz Not available in this release.
show	Show running system information
class-map	Show class maps
type	Type of the class-map
qos	type qos
queuing	type queuing
cmap-name	Type: string antipattern: type \| typ \| ty \| t \| class-default \| class \| default length: 40 class map name
cmap-enum-name	2q4t-in-q1 value: 1 Ingress queue 1 of 2q4t type 2q4t-in-q-default value: 2 Ingress default queue of 2q4t type 8q2t-in-q1 value: 3 Ingress queue 1 of 8q2t type 8q2t-in-q2 value: 4 Ingress queue 2 of 8q2t type 8q2t-in-q3 value: 5 Ingress queue 3 of 8q2t type 8q2t-in-q4 value: 6 Ingress queue 4 of 8q2t type 8q2t-in-q5 value: 7 Ingress queue 5 of 8q2t type 8q2t-in-q6 value: 8 Ingress queue 6 of 8q2t type 8q2t-in-q7 value: 9 Ingress queue 7 of 8q2t type 8q2t-in-q-default value: 10 Ingress default queue of 8q2t type 1p3q4t-out-pq1 value: 11 Egress priority queue of 1p3q4t type 1p3q4t-out-q2 value: 12 Egress queue 2 of 1p3q4t type 1p3q4t-out-q3 value: 13 Egress queue 3 of 1p3q4t type 1p3q4t-out-q-default value: 14 Egress default queue of 1p3q4t type 1p7q4t-out-pq1 value: 15 Egress priority queue of 1p7q4t type 1p7q4t-out-q2 value: 16 Egress queue 2 of 1p7q4t type 1p7q4t-out-q3 value: 17 Egress queue 3 of 1p7q4t type 1p7q4t-out-q4 value: 18 Egress queue 4 of 1p7q4t type 1p7q4t-out-q5 value: 19 Egress queue 5 of 1p7q4t type 1p7q4t-out-q6 value: 20 Egress queue 6 of 1p7q4t type 1p7q4t-out-q7 value: 21 Egress queue 7 of 1p7q4t type 1p7q4t-out-q-default value: 22 Egress default queue of 1p7q4t type
default-cmap-enum-name	in-q1 value: 1 Ingress queue 1 for default policy in-q-default value: 2 Ingress default queue for default policy out-pq1 value: 3 Egress priority queue for default policy out-q2 value: 4 Egress queue 2 for default policy out-q3 value: 5 Egress queue 3 for default policy out-q-default value: 6 Egress default queue for default policy
cmap-dce-name	Type: string antipattern: type \| typ \| ty \| t \| class-default \| class \| default length: 40 Queuing class-map name
cmap-name-hque	Type: string antipattern: type \| typ \| ty \| t \| class-default \| class \| default length: 40 Hierarchical class-map name
color-map-enum-name
__readonly__
display-all	Type: integer Display all kinds of class-maps
TABLE_cmap	all cmap xml sessions
cmap-key	Type: string Class-map name: xml key
TABLE_match	all match xml sessions
match-key	Type: uinteger match count: xml key
cmap-name-out	Type: string Class-map name
xqos-or-q	qos value: 1 qos policy queuing value: 2 queuing policy
any_or_all	Enter match-any or match-all match-any value: 1 Logical-OR all match statements under this classmap match-all value: 2 Logical-AND all match statements under this classmap
id	Type: uinteger Class-map ID
desc	Type: string length: 200 Description string
not	Type: uinteger Negate this match result
dscp-list	Type: integer-mrange List of DSCP values
precedence-list	Type: integer-mrange List of precedence values
cos-list	Type: integer-mrange List of class-of-service values
qos-group-list	Type: integer-mrange List of qos-group values
discard-class-list	Type: integer-mrange List of discard-class values
vlan-list	Type: vlan-mrange List of vlan-ids
match-cmap-name	Type: string class-map name
match-acl-name	Type: string Match class-map name
note-string	Type: string length: 300 Placeholder string param to display any info in string format
pkt-len-list	Type: integer-mrange Packet length multi-range
rtp-port-list	Type: integer-mrange IP RTP UDP port multi-range
prot	Type: integer Protocol
input-iface-list	Type: interface-mrange Input Interface multi-range
exp-list	Type: integer-mrange List of MPLS exp values

Command Modes

/exec

show class-map type control-plane

show class-map type control-plane [cmap-name] [ __readonly__ [ TABLE_cmap cmap-key cmap-name-out opt_any_or_all [ TABLE_match match-key [ access_grp acc_grp_name ] [ redirect opt_match_redirect ] [ exception opt_match_excpt ] [ protocol opt_match_protocol ] ] ] ]

Syntax Description

show	Show running system information
class-map	Show class maps
type	Type of the class-map
control-plane	This is for copp policy
cmap-name	Type: string length: 64 Name of the class-map
__readonly__
TABLE_cmap	all cmap xml sessions
cmap-name-out	Type: string Name of the class-map
cmap-key	Type: string Class-map name: xml key
opt_any_or_all	Enter match-any or match-all match-any value: 1 Logical-OR all match statements under this classmap match-all value: 2 Logical-AND all match statements under this classmap
TABLE_match	all match xml sessions
match-key	Type: uinteger match count: xml key
access_grp
acc_grp_name	Type: string
redirect
opt_match_redirect	Match criteria for redirected packets dhcp-snoop value: 3 Match redirected packets for dhcp arp-inspect value: 6 Match redirected packets for arp-inspect
exception
opt_match_excpt	Match criteria for exception packets ip-option value: 1 Match exception packets for ip-options ip-icmp-redirect value: 2 Match exception packets for ip-icmp-redirect ip-icmp-unreachable value: 3 Match exception packets for ip-icmp-unreachable urpf-failure value: 4 Match exception packets for urpf-failure second-mrpf-failure value: 5 Match exception packets for second-mrpf-failure ttl-failure value: 6 Match exception packets for ttl-failure glean value: 7 Match exception packets for glean ipv6-option value: 8 Match exception packets for ipv6-options ipv6-icmp-redirect value: 9 Match exception packets for ipv6-icmp-redirect ipv6-icmp-unreachable value: 10 Match exception packets for ipv6-icmp-unreachable mtu-failure value: 11 Match exception packets for mtu-failure multicast-rpf-failure value: 12 Match exception packets for multicast rpf-failure multicast-directly-connected-sources value: 13 Match exception packets for multicast directly-connected-sources ip-municast value: 14 Match exception packets for ip-municast ipv6-municast value: 15 Match exception packets for ipv6-municast fcoe-fib-miss value: 16 Match Exception Packets for FCoE FIB Miss multicast-dest-miss value: 17 Match Exception Packets for IP Multicast Destination Lookup Miss multicast-sg-rpf-failure value: 18 Match exception packets for multicast sg rpf check failure
protocol
opt_match_protocol	Match criteria for protocol packets arp value: 1 IP ARP mpls value: 13 Multi-protocol Label Switching otv value: 17 OTV Overlay IS-IS frames mpls_exp6 value: 18 MPLS Exp 6

Command Modes

/exec

show class-map type network-qos

show class-map type network-qos [cmap-name-nq] [ __readonly__ display-all desc xcmap-name cos-list qos-group-list protocol ]

Syntax Description

show	Show running system information
class-map	Show class maps
type	Type of the class-map
cmap-name-nq	Type: string antipattern: type \| typ \| ty \| t \| class-default \| class \| default length: 40 Class-map name
network-qos	type network-qos
__readonly__
display-all	Type: integer Display all network-qos class-maps
desc	Type: string length: 200 Description string
xcmap-name	Type: string Class-map name
protocol	Type: integer protocol
cos-list	Type: integer-mrange List of class-of-service values
qos-group-list	Type: integer-mrange List of qos-group values

Command Modes

/exec

show cli alias

show cli alias [ name s0 ]

Syntax Description

show	Show running system information
cli	Show CLI information
alias	Display the alias configuration
name	Display a specific alias
s0	Type: string length: 30 Specify the alias

Command Modes

/exec

show cli dynamic integers

show cli dynamic integers [name] [ __readonly__ TABLE_dynamic_integers name-o min max ]

Syntax Description

show	Show running system information
cli	CLI commands
dynamic	Display current range of dynamic parameters
integers	Display current range of dynamic integer parameters
name	Type: string name of the dynamic parameter
__readonly__
TABLE_dynamic_integers
name-o	Type: string
min	Type: integer
max	Type: integer

Command Modes

/exec

show cli dynamic strings

show cli dynamic strings [name] [ __readonly__ TABLE_dynamic_strings name-o value+ ]

Syntax Description

show	Show running system information
cli	CLI commands
dynamic	Display current range of dynamic parameters
strings	Display current range of dynamic string parameters
name	Type: string name of the dynamic parameter
__readonly__
TABLE_dynamic_strings
name-o	Type: string
value	Type: string

Command Modes

/exec

show cli history

show cli history [ this-mode-only | exec-mode | config-mode ] [ count | unformatted ] +

Syntax Description

show	Show running system information
cli	debug cli
history	history of cli commands
count	Type: integer number of lines to display (from end)
unformatted	display just the commands
this-mode-only	display history from current mode only
exec-mode	display history of exec commands only
config-mode	display history of config commands only

Command Modes

/exec

show cli interface table

show cli interface table

Syntax Description

show	show
cli	cli
interface	interface
table	table

Command Modes

/exec

show cli list

show cli list [ detail | recurse | component | max-per-cmd ] +

Syntax Description

show	Show running system information
cli	Show CLI information

Command Modes

/exec

show cli registry

show cli registry [ ctags | tags | modes | session | inherit ]

Syntax Description

show	Show running system information

Command Modes

/exec

show cli syntax

Syntax Description

show	Show running system information
cli	Show CLI information

Command Modes

/exec

show cli variables

show cli variables

Syntax Description

show	Show running system information
cli	Show CLI information
variables	Show CLI variables

Command Modes

/exec

show clock

show clock [detail] [ __readonly__ simple_time [ daylight_zone daylight_start_week daylight_start_weekday daylight_start_month daylight_start_time daylight_end_week daylight_end_weekday daylight_end_month daylight_end_time daylight_utc_min_offset ] ]

Syntax Description

show	Show running system information
clock	Display current Date
detail	Display current date and summertime configuration
__readonly__
simple_time	Type: string simple clock format
daylight_zone	Type: string summer-time daylight zone
daylight_start_week	Type: integer daylight start week
daylight_start_weekday	Type: string daylight start weekday
daylight_start_month	Type: string daylight start month
daylight_start_time	Type: string daylight start time
daylight_end_week	Type: integer daylight end week
daylight_end_weekday	Type: string daylight end weekday
daylight_end_month	Type: string daylight end month
daylight_end_time	Type: string daylight end time
daylight_utc_min_offset	Type: integer daylight utc offset

Command Modes

/exec

show clock utc

show clock utc

Syntax Description

show	Show running system information
clock	Display current Date
utc	Display current time in UTC

Command Modes

/exec

show configuration session (ssnmgr)

show configuration session [ __readonly__ ssn-name ssn-cmd-num command + trlr ]

Syntax Description

show	Show running system information
configuration	Show information about configuration sessions
session	Show active configuration sessions
__readonly__	Read only
ssn-name	Type: string
ssn-cmd-num	Type: uinteger
command	Type: string
trlr	Type: string

Command Modes

/exec

show configuration session (ssnmgr)

show configuration session s3 [ __readonly__ ssn-name ssn-cmd-num command + ]

Syntax Description

show	Show running system information
configuration	Show information about configuration sessions
session	Show active configuration sessions
s3	Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* length: 64 Shows configuration session given a name
__readonly__	Read only
ssn-name	Type: string
ssn-cmd-num	Type: uinteger
command	Type: string

Command Modes

/exec

show configuration session global-info

show configuration session global-info [ __readonly__ max-ssns max-cmds curr-num-ssns curr-num-cmds ]

Syntax Description

show	Show running system information
configuration	Show information about configuration sessions
session	Show active configuration sessions
global-info	Show configuration sessions global-info
__readonly__	Read only
max-ssns	Type: uinteger
max-cmds	Type: uinteger
curr-num-ssns	Type: uinteger
curr-num-cmds	Type: uinteger

Command Modes

/exec

show configuration session status

show configuration session status [s3] [ __readonly__ ssn-name last-action ac-tstamp ac-status ac-reason failed-cmd-num+ failed-cmd + last-vfy-cmd-num last-vfy-cmd last-vfy-tstamp + rollback-status+ trlr ]

Syntax Description

show	Show running system information
configuration	Show information about configuration sessions
session	Show active configuration sessions
status	Show configuration session-mgr status
s3	Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* length: 64 Shows configuration session status given a name
__readonly__	Read only
ssn-name	Type: string
last-action	Type: string
ac-tstamp	Type: string
ac-status	Type: string
ac-reason	Type: integer
failed-cmd-num	Type: integer
failed-cmd	Type: string
last-vfy-cmd-num	Type: integer
last-vfy-cmd	Type: string
last-vfy-tstamp	Type: string
rollback-status	Type: integer
trlr	Type: string

Command Modes

/exec

show configuration session summary

show configuration session summary [ __readonly__ hdr ssn-name username tstamp + trlr ]

Syntax Description

show	Show running system information
configuration	Show information about configuration sessions
session	Show active configuration sessions
summary	Show summary of the active configuration sessions
__readonly__	Read only
hdr	Type: string
ssn-name	Type: string
username	Type: string
tstamp	Type: string
trlr	Type: string

Command Modes

/exec

show consistency-checker forwarding ipv6show forwarding ipv6 inconsistency

show consistency-checker forwarding ipv6 [unicast] [ vrf { vrf-name | all_vrfs } ] [ module { module | all_modules } ] | show forwarding ipv6 [unicast] inconsistency [ vrf { vrf-name | all_vrfs } ] [ module { module | all_modules } ] [ __readonly__ TABLE_inconsistency idipv6 slotipv6 [unitipv6] vrfipv6 [ipv6addr] [ipv6prefix] [interfaceipv6] reasonipv6 ]

Syntax Description

show	show
consistency-checker	Consistency Checker
forwarding	Display Forwarding Information
inconsistency	route inconsistency check
ipv6	ipv6
unicast	unicast
vrf	check routes for a specific VRF
vrf-name	Type: string VRF name
module	check routes for a specific module
module	Type: integer module number
all_modules	all module's
all_vrfs	all vrf's
__readonly__
TABLE_inconsistency
idipv6	Type: integer
slotipv6	Type: integer
unitipv6	Type: integer
vrfipv6	Type: vrf
ipv6addr	Type: ipv6addr
ipv6prefix	Type: ipv6prefix
interfaceipv6	Type: interface
reasonipv6	Type: string

Command Modes

/exec

show consistency-checker forwardingshow forwarding inconsistency

show consistency-checker forwarding [ ip | ipv4 ] [unicast] [ vrf { vrf-name | all_vrfs } ] [ module { module | all_modules } ] | show forwarding [ ip | ipv4 ] [unicast] inconsistency [ vrf { vrf-name | all_vrfs } ] [ module { module | all_modules } ] [ __readonly__ TABLE_inconsistency id slot [unit] vrf [ipaddr] [ipprefix] [interface] reason ]

Syntax Description

show	show
consistency-checker	Consistency Checker
forwarding	Display Forwarding Information
inconsistency	route inconsistency check
ip	ipv4
ipv4	ipv4
unicast	unicast
vrf	check routes for a specific VRF
vrf-name	Type: string VRF name
module	check routes for a specific module
module	Type: integer module number
all_modules	all module's
all_vrfs	all vrf's
__readonly__
TABLE_inconsistency
id	Type: integer
slot	Type: integer
unit	Type: integer
vrf	Type: vrf
ipaddr	Type: ipaddr
ipprefix	Type: ipprefix
interface	Type: interface
reason	Type: string

Command Modes

/exec

show consistency-checker racl port-channels

show consistency-checker racl port-channels [ interface ch-id ]

Syntax Description

show	Show running system information
consistency-checker	Consistency Checker
racl	Verify racl programming in the hardware
port-channels	Verifies port channel racl programming in the hardware
interface	Port-channel number
ch-id	Type: interface Port-Channel name

Command Modes

/exec

show copp diff profile profile2

show copp diff profile profile_type [prior-ver] profile2 profile_type2

Syntax Description

show	Show running system information
copp	Control-Plane Policing
diff	Difference between CoPP Profiles
profile	CoPP Profile
profile_type	CoPP Profile Types strict value: 1 The Strict Profile moderate value: 2 The Moderate Profile lenient value: 3 The Lenient Profile dense value: 4 The Dense Profile
prior-ver	Previous Configured Version
profile2	CoPP Profile
profile_type2	CoPP Profile Types strict value: 1 The Strict Profile moderate value: 2 The Moderate Profile lenient value: 3 The Lenient Profile dense value: 4 The Dense Profile

Command Modes

/exec

show copp profile

show copp profile { strict | moderate | lenient | dense } [ __readonly__ acl-type acl-grp-name permitdeny { proto_str | proto | ip | ipv6 } { src_any | src_ip_prefix | src_ip_addr src_ip_mask | src_ipv6_prefix | src_addrgrp | src_mac_any | src_mac_addr src_mac_mask } [ src_port_op { src_port1_str | src_port1_num } [ src_port2_str | src_port2_num ] | src_portgrp ] { dest_any | dest_ip_prefix | dest_ip_addr dest_ip_mask | dest_ipv6_prefix | dest_addrgrp | dest_mac_any | dest_mac_addr dest_mac_mask } [ dest_port_op { dest_port1_str | dest_port1_num } [ dest_port2_str | dest_port2_num ] | dest_portgrp ] [ { icmp_type [icmp_code] | icmp_str } | { icmpv6_type [icmpv6_code] | icmpv6_str } ] eth_proto newline cmap_name opt_any_or_all { access_grp acc_grp_name | redirect opt_match_redirect | exception opt_match_excpt protocol opt_match_protocol } + pmap_name class-name cir opt_kbps_mbps_gbps_pps_cir percent cir-perc pir opt_kbps_mbps_gbps_pps_pir percent1 pir-perc bc opt_kbytes_mbytes_gbytes_bc be opt_kbytes_mbytes_gbytes_be { opt_drop_transmit_conform | set-cos-transmit set-cos-val | set-dscp-transmit set-dscp-val | set-prec-transmit set-prec-val } { opt_drop_transmit_exceed | set dscp1 dscp2 table cir-markdown-map } { opt_drop_transmit_violate | set1 dscp3 dscp4 table1 pir-markdown-map } { cos [inner] cos-val | dscp [tunnel] dscp-val | precedence [tunnel1] prec-val policer_show_flags set_vld_flg } + ]

Syntax Description

show	Show running system information
copp	Control-Plane Policing
profile	CoPP Profile
strict	display strict profile
moderate	display moderate profile
lenient	display lenient profile
dense	display dense profile
__readonly__	Read Only
acl-type	Type: uinteger access-list type
acl-grp-name	Type: string name of the access-list
permitdeny	permit/deny deny value: 1 acl rule deny permit value: 2 acl rule permit
proto	Type: uinteger min: 0 max: 255 A protocol number
proto_str	Type: string Protocol name
ip	IP ip value: 1 IP Protocol
ipv6	IPV6 ipv6 value: 1 IPv6 Protocol
src_any	SRCAny any value: 1 Any IP address
dest_any	DESTAny any value: 1 Any IP address
src_ip_prefix	Type: ipprefix Source IP prefix
src_ip_addr	Type: ipaddr Source IP address
src_ip_mask	Type: ipaddr Source IP mask
src_ipv6_prefix	Type: ipv6prefix Source IPv6 prefix
src_mac_addr	Type: ethernet Source MAC address
src_mac_mask	Type: ethernet Source MAC mask
src_mac_any	SRCMACAny any value: 1 ANY MAC address
dest_ip_prefix	Type: ipprefix Destination IP prefix
dest_ip_addr	Type: ipaddr Destination IP address
dest_ip_mask	Type: ipaddr Destination IP mask
dest_ipv6_prefix	Type: ipv6prefix Destination IPv6 prefix
dest_mac_addr	Type: ethernet Destination MAC address
dest_mac_mask	Type: ethernet Destination MAC mask
dest_mac_any	DESTMACAny any value: 1 ANY MAC address
src_port_op	Source Port operator lt value: 4 Match only packets with a lower port number gt value: 5 Match only packets with a higher port number eq value: 6 Match only packets with a equal port number neq value: 7 Match only packets with a diff port number range value: 8 Match only packets in range
dest_port_op	Destination Port operator lt value: 4 Match only packets with a lower port number gt value: 5 Match only packets with a higher port number eq value: 6 Match only packets with a equal port number neq value: 7 Match only packets with a diff port number range value: 8 Match only packets in range
src_port1_str	Type: string Source port name
src_port1_num	Type: uinteger Source port number
src_port2_str	Type: string Source port name
src_port2_num	Type: uinteger Source port number
dest_port1_str	Type: string Destination port name
dest_port1_num	Type: uinteger Destination port number
dest_port2_str	Type: string Destination port name
dest_port2_num	Type: uinteger Destination port number
icmp_type	Type: uinteger ICMP type
icmp_code	Type: uinteger ICMP code
icmp_str	Type: string ICMP message
icmpv6_type	Type: uinteger ICMP type
icmpv6_code	Type: uinteger ICMP code
icmpv6_str	Type: string ICMP message
src_addrgrp	Type: string Source address group
dest_addrgrp	Type: string Destination address group
src_portgrp	Type: string Source port group
dest_portgrp	Type: string Destination port group
eth_proto	Type: hex MAC protocol number
newline	Type: string newline between access-list and cmaps
cmap_name	Type: string Name of the class-map
opt_any_or_all	Enter match-any or match-all match-any value: 1 Logical-OR all match statements under this classmap match-all value: 2 Logical-AND all match statements under this classmap
access_grp
acc_grp_name	Type: string
redirect
opt_match_redirect	Match criteria for redirected packets dhcp-snoop value: 3 Match redirected packets for dhcp arp-inspect value: 6 Match redirected packets for arp-inspect
exception
opt_match_excpt	Match criteria for exception packets ip-option value: 1 Match exception packets for ip-options ip-icmp-redirect value: 2 Match exception packets for ip-icmp-redirect ip-icmp-unreachable value: 3 Match exception packets for ip-icmp-unreachable urpf-failure value: 4 Match exception packets for urpf-failure second-mrpf-failure value: 5 Match exception packets for second-mrpf-failure ttl-failure value: 6 Match exception packets for ttl-failure glean value: 7 Match exception packets for glean ipv6-option value: 8 Match exception packets for ipv6-options ipv6-icmp-redirect value: 9 Match exception packets for ipv6-icmp-redirect ipv6-icmp-unreachable value: 10 Match exception packets for ipv6-icmp-unreachable mtu-failure value: 11 Match exception packets for mtu-failure multicast-rpf-failure value: 12 Match exception packets for multicast rpf-failure multicast-directly-connected-sources value: 13 Match exception packets for multicast directly-connected-sources ip-municast value: 14 Match exception packets for ip-municast ipv6-municast value: 15 Match exception packets for ipv6-municast fcoe-fib-miss value: 16 Match Exception Packets for FCoE FIB Miss multicast-dest-miss value: 17 Match Exception Packets for IP Multicast Destination Lookup Miss multicast-sg-rpf-failure value: 18 Match exception packets for multicast sg rpf check failure
protocol
opt_match_protocol	Match criteria for protocol packets arp value: 1 IP ARP mpls value: 13 Multi-protocol Label Switching otv value: 17 OTV Overlay IS-IS frames mpls_exp6 value: 18 MPLS Exp 6
pmap_name	Type: string Name of the Policy-map
class-name	Type: string Name if the policy member
cir	Type: long Committed Information Rate in bps/kbps/mbps/gbps
opt_kbps_mbps_gbps_pps_cir	Units pps value: 8 Packets per second
percent
cir-perc	Type: long Percent specification for cir
pir	Type: long Peak Information Rate in bps/kbps/mbps/gbps
opt_kbps_mbps_gbps_pps_pir	Units bps value: 1 Bits per second kbps value: 2 Kilo Bits per second mbps value: 3 Mega Bits per second gbps value: 4 Giga Bits per second pps value: 8 Packets per second
percent1
pir-perc	Type: long Percent specification for pir
bc	Type: long Committed Information size in bytes/kbytes/mbytes/packets/ms/us
opt_kbytes_mbytes_gbytes_bc	Units packets value: 8 Packets
be	Type: long Peak Information size in bytes/kbytes/mbytes/packets/ms/us
opt_kbytes_mbytes_gbytes_be	Units bytes value: 1 Bytes kbytes value: 2 Kilo Bytes mbytes value: 3 Mega Bytes packets value: 8 Packets ms value: 5 Milli seconds us value: 6 Micro seconds
opt_drop_transmit_conform	Set the action transmit value: 1 Transmit the packet
set-cos-transmit
set-cos-val	Type: uinteger Conform action cos val
set-dscp-transmit
set-dscp-val	Type: uinteger Conform action dscp val
set-prec-transmit
set-prec-val	Type: uinteger Conform action prec val
opt_drop_transmit_exceed	Set the action drop value: 2 Drop the packet transmit value: 1 Transmit the packet
set
dscp1
dscp2
table
cir-markdown-map
opt_drop_transmit_violate	Set the action drop value: 2 Drop the packet
set1
dscp3
dscp4
table1
pir-markdown-map
cos
inner
cos-val	Type: uinteger Set cos val
dscp
tunnel
dscp-val	Type: uinteger Set dscp val
precedence
tunnel1
prec-val	Type: uinteger Set prec val
policer_show_flags	Type: uinteger Policer show flags
set_vld_flg	Type: uinteger Set valid flag

Command Modes

/exec

show copp status

show copp status [ __readonly__ last_config_operation last_cfg_oper last_config_operation_time last_cfg_oper_time last_config_operation_status last_cfg_oper_status [ last_config_operation_error_time last_cfg_oper_error_time ] [ last_config_operation_error last_cfg_oper_error ] service_policy srv_policy ]

Syntax Description

show	Show running system information
copp	Control-Plane Policing
status	Show the internal status of CoPP
__readonly__
last_config_operation	last config operation
last_cfg_oper	Type: string last config operation
last_config_operation_time	timestamp of last config operation
last_cfg_oper_time	Type: string timestamp of last config operation
last_config_operation_status	status of last config operation
last_cfg_oper_status	Type: string status of last config operation
last_config_operation_error_time	timestamp of last config operation's error
last_cfg_oper_error_time	Type: string timestamp of last config operation's error
last_config_operation_error	last config operation's error
last_cfg_oper_error	Type: string last config operation's error
service_policy	policy-map attached to control-plane
srv_policy	Type: string policy-map attached to control-plane

Command Modes

/exec

show copyright

show copyright [ __readonly__ content ]

Syntax Description

show	Show running system information
copyright	Copyright information
__readonly__
content	Type: string Copyrigh information

Command Modes

/exec

show cores

show cores [ vdc-all | vdc [ e-vdc2 | vdc-id ] ] [ __readonly__ [ TABLE_cores vdc_id module_id instance process_name pid sys_time ] ]

Syntax Description

show	Show running system information
cores	show all core dumps for the current vdc
vdc-all	show core dumps from all vdcs
vdc	show all core dumps for the vdc
__readonly__
TABLE_cores
vdc_id	Type: integer vdc id
module_id	Type: integer module id
instance	Type: integer instance number
process_name	Type: string name of the process
pid	Type: string process id
sys_time	Type: string core generate time
e-vdc2	Type: userdef Enter VDC <vdc-id>
vdc-id	Type: integer min: 1 max: 17 vdc number

Command Modes

/exec

show crypto ca certificates (certen_tree)

show crypto ca certificates s0 [ __readonly__ Trustpoint trustpoint [ Certificate certificate ] [ TABLE_ca_cert_chains index ca_certificate ] ]

Syntax Description

show	Show running system information
crypto	show crypto configuration
ca	show trustpoint configuration
certificates	show various certificates
s0	Type: string length: 64 trustpoint label
__readonly__
Trustpoint	Trustpoint
trustpoint	Type: string Trustpoint
Certificate	Certificate
certificate	Type: string Certificate
TABLE_ca_cert_chains	Table of CA certificates in chain
index	Type: string CA Certificate Index
ca_certificate	Type: string CA certificate

Command Modes

/exec

show crypto ca certificates (certen_tree)

show crypto ca certificates [ __readonly__ [ TABLE_ca_certificates trustpoint [certificate] [ TABLE_ca_cert_chains index ca_certificate ] ] ]

Syntax Description

show	Show running system information
crypto	show crypto configuration
ca	show trustpoint configuration
certificates	show various certificates
__readonly__
TABLE_ca_certificates	Table of CA certificates
trustpoint	Type: string Trustpoint name
certificate	Type: string Certificate
TABLE_ca_cert_chains	Table of CA certificates in chain
index	Type: string CA Certificate Index
ca_certificate	Type: string CA certificate

Command Modes

/exec

show crypto ca certstore

show crypto ca certstore [ __readonly__ certstore_lookup lookup_type ]

Syntax Description

show	Show running system information
crypto	Show crypto configuration
ca	show crypto ca configuration
certstore	Show the configured certstore
__readonly__
certstore_lookup	Certificate strore lookup
lookup_type	Type: string Lookup type

Command Modes

/exec

show crypto ca crl

show crypto ca crl s0 [ __readonly__ Trustpoint trustpoint [ CRL crl ] ]

Syntax Description

show	Show running system information
crypto	show crypto configuration
ca	show trustpoint configuration
crl	show CRL
s0	Type: string length: 64 trustpoint label
__readonly__
Trustpoint	Trustpoint
trustpoint	Type: string Trustpoint
CRL	Certificate Revocation List
crl	Type: string Certificate Revocation List

Command Modes

/exec

show crypto ca remote-certstore

show crypto ca remote-certstore [ __readonly__ remote_cert_store rem_cert_store [ crl_timer crltimer ldap_server_group ldap_server_grp ] ]

Syntax Description

show	Show running system information
crypto	Show crypto configuration
ca	show crypto ca configuration
remote-certstore	Show remote certstore configuration
__readonly__
remote_cert_store	Remote cert store
rem_cert_store	Type: string Remote certificate store
crl_timer	CRL timer
crltimer	Type: string CRL timer
ldap_server_group	LDAP Server Group
ldap_server_grp	Type: string LDAP Server Group

Command Modes

/exec

show crypto ca trustpoints

show crypto ca trustpoints [ __readonly__ [ TABLE_ca_truspoints trustpoint key-pair [ TABLE_revocation_methods revocation-method ] [ocsp-url] ] ]

Syntax Description

show	Show running system information
crypto	show crypto configuration
ca	show trustpoint configuration
trustpoints	show trustpoint configuration
__readonly__
trustpoint	Type: string Trustpoint
key-pair	Type: string Key pair
TABLE_revocation_methods	Table of revocation methods
revocation-method	Type: string Revocation mehtod
ocsp-url	Type: string OCSP URL
TABLE_ca_truspoints	Table of CA trustpoints

Command Modes

/exec

show crypto certificatemap

show crypto certificatemap [ __readonly__ [ TABLE_certmap map_name subject_name alternate_email alternate_upn ] ]

Syntax Description

show	Show running system information
crypto	show crypto configuration
certificatemap	show certificatemap filters
__readonly__
TABLE_certmap	Table of Certificate Map
map_name	Type: string Map name
subject_name	Type: string Subject name
alternate_email	Type: string Alternate Email
alternate_upn	Type: string Alternate UPN

Command Modes

/exec

show crypto key mypubkey rsa

show crypto key mypubkey rsa [ __readonly__ [ TABLE_rsa_keys key_label key_size exportable err_string ] ]

Syntax Description

show	Show running system information
crypto	show crypto configuration
key	show key configuration
mypubkey	show my public keys configuration
rsa	show my rsa public keys configuration
__readonly__
TABLE_rsa_keys	Table of RSA keys
key_label	Type: string Key Lable
key_size	Type: string Key size
exportable	Type: string Exportable
err_string	Type: string Error String

Command Modes

/exec

show crypto ssh-auth-map

show crypto ssh-auth-map [ __readonly__ [ TABLE_ssh_auth_map issuer_name map1 [map2] ] ]

Syntax Description

show	Show running system information
crypto	show crypto configuration
ssh-auth-map	show mapping filters applied for ssh authentication
__readonly__
TABLE_ssh_auth_map	Table of SSH Auth MAP
issuer_name	Type: string Issuer Name
map1	Type: string Map 1
map2	Type: string Map 2

Command Modes

/exec

show current

show current

Syntax Description

show	Display region configurations
current	Display mst configuration currently used

Command Modes

/exec/configure/spanning-tree/mst/configuration

Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)

Bias-Free Language

Results

Chapter: C Show Commands

C Show Commands

show callhome

Syntax Description

Command Modes

show callhome destination-profile

Syntax Description

Command Modes

show callhome destination-profile profile

Syntax Description

Command Modes

show callhome destination-profile profile CiscoTAC-1

Syntax Description

Command Modes

show callhome destination-profile profile full-txt-destination

Syntax Description

Command Modes

show callhome destination-profile profile short-txt-destination

Syntax Description

Command Modes

show callhome transport

Syntax Description

Command Modes

show callhome transport-email

Syntax Description

Command Modes

show callhome user-def-cmds

Syntax Description

Command Modes

show cdp (cdpd)

Syntax Description

Command Modes

show cdp (cdpd)

Syntax Description

Command Modes

show cdp global

Syntax Description

Command Modes

show cdp neighbors

Syntax Description

Command Modes

show cdp neighbors detail

Syntax Description

Command Modes

show cdp traffic interface2

Syntax Description

Command Modes

show cfs application

Syntax Description

Command Modes

show cfs lock

Syntax Description

Command Modes

show cfs merge status

Syntax Description

Command Modes

show cfs peers

Syntax Description

Command Modes

show cfs regions

Syntax Description

Command Modes

show cfs remote-app vsan domain

Syntax Description

Command Modes

show cfs remote-switches vsan

Syntax Description

Command Modes

show cfs static peers

Syntax Description

Command Modes

show cfs status

Syntax Description

Command Modes

show checkpoint (cfg_rollback)

Syntax Description

Command Modes