U Show Commands

show udld

show udld [if0] [ __readonly__ TABLE_interface interface mib-port-status mib-oper-status mib-aggresive-mode admin-port-mode operational-port-mode current-bidirectional-state current-operational-state message-interval timeout-interval no-multiple-neighbor-detected TABLE_entry entry-number expiration-time device-id neighbor-state device-name port-id neighbor-echo-device-number neighbor-echo-device-name neighbor-echo-port-number neighbor-echo-port-id neighbor-message-interval neighbor-timeout-interval cdp-device-name pkt-xmt-rec-time pc-index ]

Syntax Description

show

Show running system information
udld

UDLD status and configuration on one or all interfaces
if0

Type: interface

Enter an interface name if only one single interface status is desired
__readonly__

TABLE_interface

interface

Type: interface

Interface ID
mib-port-status

Port MIB enable status

enabled  value: 1
udld is enabled on this port
disabled  value: 2
udld is disabled on this port
mib-oper-status

Port MIB Operational status

shutdown  value: 1
this port status is shutdown
indeterminant  value: 2
this port status is indeterminant
bidirectional  value: 3
this port status is bidirectional
notapplicable  value: 4
this port status is not applicable
mib-aggresive-mode

Port MIB aggresive mode

enabled  value: 1
Aggresive mode is enabled on this port
disabled  value: 2
Aggresive mode is disabled on this port
admin-port-mode

Port enable administration configuration setting

unknown  value: 0
udld status unknown
enabled  value: 1
udld is enabled on this port
disabled  value: 2
udld is disabled on this port
enabled-aggressive  value: 3
udld is enabled with aggressive mode this port
device-default  value: 4
udld follows device default on this port
operational-port-mode

Port enable operational state

enabled  value: 1
udld is enabled on this port
disabled  value: 2
udld is disabled on this port
enabled-aggressive  value: 3
udld is enabled w/ aggresive mode on this port
current-bidirectional-state

Current bidirectional state

unknown  value: 0
Neighbor status unknown
unidirectional  value: 1
Neighbor status is unidirectional
bidirectional  value: 2
Neighbor status is bidirectional
txrxloop  value: 3
Neighbor status is in tx-rx loop
mismatch  value: 4
Mismatch with neighbor state reported
echoempty  value: 5
Neighbors echo is empty
current-operational-state

Current operational state

link-up  value: 0
Neighbor status is unidirectional
link-down  value: 1
Neighbor status is bidirectional
detection  value: 2
Neighbor status is in tx-rx loop
advertisement  value: 3
Mismatch with neighbor state reported
disable-port  value: 4
Neighbors echo is empty
disable-link-up  value: 5
Neighbor status unknown
disable-link-down  value: 6
Neighbor status unknown
udld-init  value: 7
Neighbor status unknown
extended-detection  value: 8
Neighbor status unknown
message-interval

Type: integer

UDLD probe messsage interval
timeout-interval

Type: integer

UDLD detection timeout interval
no-multiple-neighbor-detected

Type: string

No multiple neighbor detected
TABLE_entry

Neighbor entry info
entry-number

Type: integer

Neighbor entry number
expiration-time

Type: integer

Expiration time
device-id

Type: integer

Device ID
neighbor-state

Current neighbor state

unknown  value: 0
Neighbor status unknown
unidirectional  value: 1
Neighbor status is unidirectional
bidirectional  value: 2
Neighbor status is bidirectional
tx-rx-loop  value: 3
Neighbor status is in tx-rx loop
neighbor-mismatch  value: 4
Mismatch with neighbor state reported
empty-echo  value: 5
Neighbors echo is empty
device-name

Type: string

Device name
port-id

Type: string

Port ID

neighbor-echo-device-number

Type: integer

Echo device number
neighbor-echo-device-name

Type: string

Echo device name
neighbor-echo-port-number

Type: integer

Echo port number
neighbor-echo-port-id

Type: string

Echo port ID
neighbor-message-interval

Type: integer

UDLD probe messsage interval
neighbor-timeout-interval

Type: integer

UDLD detection timeout interval
cdp-device-name

Type: string

CDP Device name
pkt-xmt-rec-time

Type: string

Last UDLD packet send/recv time
pc-index

Type: string

Port channel index

Command Modes

  • /exec

show udld global

show udld global [ __readonly__ udld-global-mode message-interval ]

Syntax Description

show

Show running system information
udld

UDLD protocol
global

UDLD global status and configuration on all interfaces
__readonly__

udld-global-mode

UDLD global configuration setting

enabled  value: 1
udld is gloablly enabled
disabled  value: 2
udld is gloablly disabled
enabled-aggressive  value: 3
udld is gloablly enabled with aggressive mode
message-interval

Type: integer

UDLD probe messsage interval

Command Modes

  • /exec

show udld neighbors

show udld neighbors [ __readonly__ TABLE_entry local-port-id neighbor-echo-device-name device-id neighbor-echo-port-id neighbor-state ]

Syntax Description

show

Show running system information
udld

UDLD protocol
neighbors

UDLD neighbor interfaces
__readonly__

TABLE_entry

local-port-id

Type: interface

Local port ID
neighbor-echo-device-name

Type: string

Echo device name
device-id

Type: integer

Device ID
neighbor-echo-port-id

Type: string

Echo port ID
neighbor-state

Current neighbor state

unknown  value: 0
Neighbor status unknown
unidirectional  value: 1
Neighbor status is unidirectional
bidirectional  value: 2
Neighbor status is bidirectional
tx-rx-loop  value: 3
Neighbor status is in tx-rx loop
neighbor-mismatch  value: 4
Mismatch with neighbor state reported
empty-echo  value: 5
Neighbors echo is empty

Command Modes

  • /exec

show ulib process

show ulib process [ __readonly__ TABLE_ulib ufdm-state urib-state u6rib-state feature-name feature-state time-left total-bytes ]

Syntax Description

show

Show running system information
ulib

Display ULIB status and configuration
process

ULIB Process information
__readonly__

TABLE_ulib

ufdm-state

Type: string
urib-state

Type: string

State of URIB
u6rib-state

Type: string

State of U6RIB
feature-name

Type: string

Feature's name
feature-state

Type: string

Feature's state
time-left

Type: string

Time left
total-bytes

Type: uinteger

Total Bytes

Command Modes

  • /exec

show user-account

show user-account [s0] [ __readonly__ TABLE_template usr_name expire_date TABLE_role role [remote_login] [sshkey_info] TABLE_keys ssh_keys ]

Syntax Description

show

Show running system information
TABLE_template

TABLE_role

TABLE_keys

__readonly__

usr_name

Type: string

Name of the user
expire_date

Type: string

Expiry date for this user account(in YYYY-MM-DD format)
role

Type: string

role/s which the user is to be assigned to
remote_login

Type: string

Remote account information for a remote user
sshkey_info

Type: string

SSH key information of user
ssh_keys

Type: string

SSH key pairs of the user
user-account

Show user information
s0

Type: string

length: 28

User name

Command Modes

  • /exec

show username keypair

show username s0 keypair [ __readonly__ TABLE_sessions t_type t_time t_keys t_bitcount t_fingerprint ]

Syntax Description

show

Show running system information
username

Show user information.
keypair

Show SSH keypairs
s0

Type: string

length: 28

user name
__readonly__

TABLE_sessions

username keypair
t_type

Type: string

keys type
t_time

Type: string

timestamp
t_keys

Type: string

ssh key
t_bitcount

Type: string

bitcount
t_fingerprint

Type: string

fingerprint

Command Modes

  • /exec

show users

show users [ __readonly__ TABLE_sessions u_name t_terminal t_time t_idle p_pid c_comment ]

Syntax Description

show

Show running system information
users

Show the current users logged in the system
__readonly__

TABLE_sessions

users table
u_name

Type: string

user name
t_terminal

Type: string

terminal
t_time

Type: string

time
t_idle

Type: string

idle
p_pid

Type: integer

pid
c_comment

Type: string

comment

Command Modes

  • /exec