Before you use Policy Analyzer and Optimizer, verify the prerequisites that apply to your policy type and data source.
Before you use Policy Analyzer and Optimizer, verify the prerequisites that apply to your policy type and data source.
-
The On-Premises Firewall Management Center must be integrated with Security Cloud Control.
In the On-Premises Firewall Management Center, navigate to Integration > Cisco Security Cloud and check the Enable Policy Analysis & Optimization checkbox after integrating with the Cisco Security Cloud.
Prerequisites to use Policy Analyzer and Optimizer for access control policy
-
Access control policy analysis is supported on the On-Premises Firewall Management Center operating on Version 7.2 or later. The Cisco-recommended Version is 7.6 or later, because these versions support cross-launch to Policy Analyzer and Optimizer directly from On-Premises Firewall Management Center.
-
Access control policy to be analyzed must be associated with a Firewall Threat Defense device that is managed by an On-Premises Firewall Management Center integrated with Security Cloud Control.