Cisco Catalyst Center Rogue Management and aWIPS Application Quick Start Guide, Release 3.1.x

PDF

Edit an aWIPS profile

Updated: December 15, 2025

Want to summarize with AI?

Log in

Overview

This procedure describes how to start and stop Wireless Rogue AP Containment on wireless clients connected to a rogue AP.

This procedure describes how to edit an aWIPS profile.

Before you begin

To add an additional subscription, you must disable and enable aWIPS from the Rogue and aWIPS overview dashboard. See Monitor the Rogue Management and aWIPS dashboard.

Procedure

1.

From the main menu, choose Assurance > Rogue and aWIPS > aWIPS Profile.
2.

In the aWIPS Profile(s) table, click the profile name that you want to edit.
3.

In the Edit aWIPS Profile window that opens, make the necessary changes and click Save.

Note

The default aWIPS profile cannot be edited.

After the profile saves, it pushes to all devices assigned to the aWIPS profile.

Note

In the Configure Threshold column for the selected aWIPS signature, if a threshold value outside the specified range is entered, an error message appears on the top of the Edit aWIPs Profile window requesting the correct value within the specified range.