Cisco Catalyst SD-WAN Troubleshooting Guide

Use the Cisco RADKit service APIs

Updated: September 28, 2026

Want to summarize with AI?

Configure the correct URL format for making API calls to the Cisco RADKit service by including the mandatory /radkit prefix before the specific API endpoint.

This task explains how to correctly format URLs for making API calls to the Cisco RADKit service. To successfully access RADKit functionalities, you must include /radkit as a mandatory prefix before the specific API endpoint in your URL. This ensures your request is properly routed within the Cisco SD-WAN Manager environment.

To access RADKit Service API endpoints, follow these steps:

Before you begin

Ensure you have access to your Cisco SD-WAN Manager instance's IP address and port.

Procedure

Construct the API URL by including the /radkit prefix before the actual endpoint.

Example:

To access the login API, the format for the URL is:

https://<sd-wan-manager-ip>:<port>/radkit/your/api/endpoint

Example:

https://10.240.185.84:8443/radkit/api/v1/auth/login

You have successfully constructed the correct URL format for accessing a Cisco RADKit Service API endpoint.

What to do next

Proceed to make your API calls to the Cisco RADKit Service using the constructed URL.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.