Cisco Catalyst SD-WAN Remote Access Configuration Guide, Releases 26.x and Later

PDF

Cisco Catalyst SD-WAN Remote Access Configuration Guide, Releases 26.x and Later

Add the SD-WAN remote access feature profile to an existing configuration group

Updated: March 10, 2026

Want to summarize with AI?

Log in

Configure the SD-WAN Remote Access feature profile for an existing configuration group to enable remote access functionality.

This task enables SD-WAN Remote Access functionality by adding the remote access feature profile to an existing configuration group and configuring the necessary VPN settings.

Use this procedure when you need to add remote access capabilities to an existing SD-WAN configuration group. This allows devices in the group to support remote access connections.

Procedure

1.

From the Cisco SD-WAN Manager menu, choose Configuration > Configuration Groups.
2.

Choose an existing configuration group and select Edit.
3.

Choose Feature Profiles > Service Profile > VPN.
4.

Choose one of the service VPNs and select Edit Feature under Actions.
5.

In Basic Configuration, select Enable SDWAN Remote Access.
6.

Choose Feature Profiles > System Profile > Add Feature > Remote Access.

The SD-WAN Remote Access feature profile is successfully added to the configuration group, enabling remote access functionality for devices assigned to this group.

What to do next

For information about working with configuration groups, see Configuration Groups and Feature Profiles.