Legacy QoS Command Deprecation

The functionality provided by these hidden commands has been replaced by similar functionality provided via the modular QoS CLI (MQC). The MQC is a set of a platform-independent commands for configuring QoS on Cisco platforms. This means that you must now provision QoS by defining traffic classes, creating traffic policies containing those classes, and attaching those policies to the desired interfaces. This document lists the hidden commands and their replacement MQC commands.

Information About Legacy QoS Command Deprecation

QoS Features Applied Using the MQC

The MQC structure lets you define a traffic class (also called a class map), create a traffic policy (also called a policy-map), and attach the traffic policy to an interface. This comprises the following three high-level steps.

  1. Define a traffic class by using the class-map command. A traffic class is used to classify traffic.

  2. Create a traffic policy by using the policy-map command. A traffic policy contains a traffic class and one or more QoS features that will be applied to the traffic class. The QoS features in the traffic policy determine how to treat the classified traffic.

  3. Attach the traffic policy to the interface by using the service-policy command.

Steps 1 and 3 do not involve legacy QoS hidden commands, which means that they are not within the scope of this document. For more information about these two steps, see the " Applying QoS Features Using the MQC " module in the Quality of Service Solutions Configuration Guide .

Legacy Commands Being Hidden

The table below lists the commands that have been hidden or removed. The table also lists their replacement commands (or sequence of commands).

Table 1. Map of Hidden, Removed or Unsupported Commands to Their Replacement Commands

Hidden, Removed or Unsupported Commands

Replacement MQC Command Sequence

Configuring Weighted Random Early Detection or Distributed Weighted Random Early Detection Parameter Groups

Commands

  • random-detect-group

  • random-detect (per VC)

Note

 

This command is not supported in Cisco IOS Release 15.0(1)S.

Command Usage 


Router(config)# random-detect-group group-name [dscp-based|prec-based]
Router(config)# interface atm  type number
Router(config-if)# pvc [name] vpi/vci
Router(config-if-atm-vc)# random-detect [attach group-name ]

Command Usage

None (this functionality no longer exists).

Configuring Weighted Random Early Detection

Commands

  • random-detect

  • random-detect dscp

  • random-detect (dscp-based keyword)

  • random-detect flow

  • random-detect exponential-weighting-constant

  • random-detect (prec-based keyword)

  • random-detect precedence

Command Usage 


Router(config)# interface type number
Router(config-if)# random-detect [number]
Router(config-if)# random-detect exponential-weighting-constant exponent
Router(config-if)# random-detect flow 
Router(config-if)# random-detect precedence {precedence|rsvp} min-threshold max-threshold max-probability-denominator
Router(config-if)# random-detect prec-based
Router(config-if)# random-detect dscp-based
Router(config-if)# random-detect dscp dscp-value min-threshold max-threshold[max-probability-denominator]

Command Usage 


Router(config)# policy-map
 
policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# random-detect dscp  dscp-value min-threshold max-threshold[ mark-probability-denominator]
Router(config-pmap-c)# random-detect clp clp-value min-threshold max-threshold[mark-probability-denominator]
Router(config-pmap-c)# random-detect cos cos-value min-threshold max-threshold[mark-probability-denominator]
Router(config-pmap-c)# random-detect discard-class discard-class-value min-threshold max-threshold[ mark-probability-denominator]
Router(config-pmap-c)# random-detectprecedence ip-precedence min-threshold max-threshold[mark-probability-denominator]
Router(config-pmap-c)# random-detect precedence-based
Router(config-pmap-c)# random-detect ecn
Router(config-pmap-c)# random-detect exponential-weighting-constant exponent
Router(config-pmap-c)# random-detect cos-based
Router(config-pmap-c)# random-detect dscp-based

Commands

  • random-detect flow

  • random-detect flow average-depth-factor

  • random-detect flow count

Command Usage 


Router(config)# interface type number
Router(config-if)# random-detect [number] 
Router(config-if)# random-detect flow
Router(config-if)# random-detect flow count number
Router(config-if)# random-detect flow average-depth-factor scaling-factor

Command Usage

None (this functionality no longer exists).

Configuring Bandwidth Allocation

Commands

  • max-reserved-bandwidth

Command Usage 


Router(config)# interface type number
Router(config-if)# max-reserved-bandwidth percentage

Command Usage 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# bandwidth{bandwidth-in-kbps  |remaining percent percentage  | percent percentage }

Configuring Custom Queueing

Commands

  • custom-queue-list

Note

 

This command is not supported in Cisco IOS Release 15.0(1)S.

Command Usage 


Router(config)# interface type number
Router(config-if)# custom-queue-list[list-number]

Command Usage 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# bandwidth{
bandwidth-in-kbps  |remaining percent percentage  |percent percentage }

Configuring Priority Queueing

Commands

  • ip rtp priority

  • ip rtp reserve

Command Usage 


Router(config)# interface type number
Router(config-if)# ip rtp priority starting-port-number port-range bandwidth
Router(config)# interface type number
Router(config-if)# ip rtp reserve lowest-udp-port range-of-ports [maximum-bandwidth] 1000

Command Usage 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class  class-name
Router(config-pmap-c)# priority

Configuring Weighted Fair Queueing

Commands

  • fair-queue (WFQ)

Command Usage (Cisco IOS Release 15.0(1)S) 


Router(config)# interface type number
Router(config-if)# fair-queue

Command Usage (Cisco IOS Release 15.1(3)T) 


Router(config)# interfacetype number
Router(config-if)# fair-queue [congestive- discard-threshold  [
dynamic-queue-count [reserved-queue-count ]]]

Command Usage (Cisco IOS Release 15.0(1)S) 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# fair-queue

Command Usage (Cisco IOS Release 15.1(3)T) 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# fair-queue[dynamic-queues ]

Assigning a Priority Group to an Interface

Commands

  • priority-group

Note

 

This command is not supported in Cisco IOS Release 15.0(1)S.

Command Usage 


Router(config)# interface type number
Router(config-if)# priority-group  list-number

Command Usage 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# priority
Router(config-pmap-c)# priority bandwidth-in-kbps [burst-in-bytes]
Router(config-pmap-c)# priority percent percent [burst-in-bytes]
Router(config-pmap-c)# priority level level
Router(config-pmap-c)# priority level level [bandwidth-in-kbps [burst-in-bytes]]
Router(config-pmap-c)# priority level  level[percent percent [burst-in-bytes]]

Configuring the Threshold for Discarding DE Packets from a Switched PVC Traffic Shaping Queue

Commands

  • frame-relay congestion threshold de

Command Usage 


Router(config)# map-class frame-relay map-class-name
Router(config-map-class)# frame-relay congestion threshold de  percentage

Command Usage 


Router(config)# policy-map  policy-map-name1
Router(config-pmap)# class class-default
Router(config-pmap-c)# random-detect discard-class-based
Router(config-pmap-c)# random-detect discard-class discard-class min-threshold max-threshold
Router(config-pmap-c)# exit
Router(config-pmap)# exit
Router(config)# policy-map shape
Router(config-pmap)# class class-default
Router(config-pmap-c)# shape average rate
Router(config-pmap-c)# service-policy policy-map-name1
Router(config-pmap-c)# exit
Router(config-pmap)# exit
Router(config)# policy-map policy-map-name2
Router(config-pmap)# class class-name
Router(config-pmap-c)# set discard-classdiscard-class

Configuring Frame Relay Custom Queueing for Virtual Circuits

Commands

  • frame-relay custom-queue-list

Command Usage 


Router(config)# map-class frame-relay map-class-name
Router(config-map-class)# frame-relay custom-queue-list list-number

Command Usage 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# bandwidth{bandwidth-in-kbps  | remaining percent percentage  | percentpercentage }

Configuring Frame Relay ECN Bits Threshold

Commands

  • frame-relay congestion threshold ecn

Command Usage 


Router(config)# map-class frame-relay map-class-name
Router(config-map-class)# 
frame-relay congestion threshold ecn  percentage

Command Usage

None (this functionality no longer exists).

The closest equivalent is MQC traffic shaping (not based on ECN). 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# shape average rate

Configuring Frame Relay Weighted Fair Queueing

Commands

  • frame-relay fair-queue

Command Usage 


Router(config)# map-class frame-relay map-class-name
Router(config-map-class)# frame-relay fair-queue [discard-threshold [dynamic-queue-count[reserved-queue-count [buffer-limit]]]]

Command Usage 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# fair-queue
Router(config-pmap-c)# fair-queue queue-limit packets

Note

 

The queue-limit packets keyword and argument pair is not supported in Cisco IOS Release 15.1(3)T.

Configuring Frame Relay Priority Queueing on a PVC

Commands

  • frame-relay ip rtp priority

Command Usage 


Router(config)# map-class frame-relay map-class-name
Router(config-map-class)# frame-relay ip rtp priority starting-port-number port-range bandwidth

Command Usage 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class  class-name
Router(config-pmap-c)# priority  bandwidth-in-kbps [burst-in-bytes]

Assigning a Priority Queue to Virtual Circuits Associated with a Map Class

Commands

  • frame-relay priority-group

Command Usage 


Router(config)# map-class frame-relaymap-class-name
Router(config-map-class)# frame-relay priority-group group-number

Command Usage 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# priority
Router(config-pmap-c)# priority bandwidth-in-kbps [burst-in-bytes]
Router(config-pmap-c)# priority percent percentage [burst-in-bytes]
Router(config-pmap-c)# priority level level [percent 
percentage [burst-in-bytes]]

Note

 

The priority level command is not supported in Cisco IOS Release 15.1(3)T.

Configuring the Frame Relay Rate Adjustment to BECN

Commands

  • frame-relay adaptive-shaping (becn keyword)

Command Usage 


Router(config)# map-class frame-relay map-class-name
Router(config-map-class)# frame-relay adaptive-shaping becn

Command Usage

None (this functionality no longer exists). The closest equivalent is MQC traffic shaping (not based on BECN). 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# shape adaptive rate

Configuring the Frame Relay Rate Adjustment to ForeSight Messages

Commands

  • frame-relay adaptive-shaping (foresight keyword)

Command Usage 


Router(config)# map-class frame-relay map-class-name
Router(config)# frame-relay adaptive-shaping foresight

Command Usage

None (this functionality no longer exists).

Enabling Frame Relay Traffic-Shaping FECNs as BECNs

Commands

  • frame-relay fecn-adapt

Command Usage 


Router(config)# map-class frame-relay map-class-name
Router(config-map-class)#frame-relay fecn-adapt

Command Usage

None (this functionality no longer exists). The closest equivalent is MQC traffic shaping (not based on FECN/BECN). 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# shape average rate

Configuring the Frame Relay Enhanced Local Management Interface

Commands

  • frame-relay qos-autosense

Note

 

This command has not been hidden in Cisco IOS Release 15.0(1)S.

Command Usage 


Router(config)# interface type number Router(config-if)#no ip address
Router(config-if)# encapsulation frame-relay
Router(config-if)# frame-relay lmi-typeansi
Router(config-if)# frame-relay traffic-shaping
Router(config-if)# frame-relay qos-autosense

Command Usage

None (this functionality no longer exists).

Configuring Frame Relay Minimum Committed Information Rate (MINCIR)

Commands

  • frame-relay mincir

Command Usage 

Router(config)# frame-relay mincir {in | out} bps

Command Usage

None (this functionality no longer exists).

Configuring Frame Relay Priority to a permanent virtual circuit (PVC)

Commands

  • frame-relay interface-queue

Command Usage 


Router(config)# interface type number Router(config-if)#no ip address
Router(config-if)# frame-relay interface-queue priority 10 20 30 40
Command Usage 
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# priority
Router(config-pmap)# class class-default
Router(config-pmap-c)# priority

Configuring Frame Relay Traffic Shaping

Commands

  • frame-relay bc

  • frame-relay be

  • frame-relay cir

Note

 

In Cisco IOS Release 15.1(3)T, these commands are not hidden, but they are valid only for SVCs (not PVCs).

Command Usage 


Router(config)# map-class frame-relay map-class-name
Router(config-map-class)# frame-relay bc {in | out} committed-burst-size-in-bits
Router(config-map-class)# frame-relay be {in | out} excess-burst-size-in-bits
Router(config-map-class)# frame-relay cir {in | out} bits-per-second

Command Usage 


Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# shape average 
rate

Configuring Frame Relay Traffic Shaping on a VC

Commands

  • frame-relay traffic-rate

Command Usage 


Router(config)# map-class frame-relaymap-class-name
Router(config-map-class)# traffic-rate average [peak]
Command Usage 

Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# shape average rate 
Router(config-pmap-c)# service-policy output traffic-rate service-policy output traffic-rate

Displaying the Contents of Packets Inside a Queue for an Interface or VC

Commands

  • show queue

Command Usage 


Router# show queue interface

Command Usage 


Router# show policy-map interface

Displaying Queueing Strategies

Commands

  • show queueing

Command Usage 


Router# show queueing

Command Usage 


Router# show policy-map interface

Displaying Weighted Random Early Detection (WRED) Information

Commands

  • show interfaces random-detect

Command Usage 


Router# show interfaces [type number] random-detect

Command Usage 


Router# show policy-map interface

Displaying WRED Parameter Groups

Commands

  • show random-detect-group

Command Usage 


Router# show random-detect-group

Command Usage 


Router# show policy-map interface

Displaying the Traffic-Shaping Configuration, Queueing, and Statistics

Commands

  • show traffic-shape

  • show traffic-shape queue

  • show traffic-shape statistics

Command Usage 


Router# show traffic-shape [interface-type interface-number] 
Router# show traffic-shape queue [interface-number [dlci dlci-number]]
Router# show traffic-shape statistics [interface-type interface-number]

Command Usage 


Router# show policy-map interface

Displaying Weighted Fair Queueing Information

Commands

  • show interfaces fair-queue

Command Usage 


Router# show interfaces [interface-type interface-number] fair-queue

Command Usage 


Router# show policy-map interface

Additional References

Related Documents

Related Topic

Document Title

Cisco IOS commands

Cisco IOS Master Commands List, All Releases

Defining traffic classes; attaching traffic policies to interfaces

" Applying QoS Features Using the MQC " module in the Quality of Service Solutions Configuration Guide

Reference pages for QoS commands

Cisco IOS Quality of Service Solutions Command Reference

Reference pages for wide-area networking commands

Cisco IOS Wide-Area Networking Command Reference

Technical Assistance

Description

Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html

Feature Information for Legacy QoS Command Deprecation

The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to https://cfnng.cisco.com/. An account on Cisco.com is not required.
Table 2. Feature Information for Legacy QoS Command Deprecation

Feature Name

Releases

Feature Information

Legacy QoS Command Deprecation: Hidden Commands

15.0(1)S 15.1(3)T

To streamline Cisco IOS QoS, certain commands have been hidden, which means that if you try to view a hidden command by entering a question mark (? ) at the command line, the command does not appear. However, if you know the command syntax, you can enter it. These commands will be removed in a future release.

The functionality provided by these hidden commands is replaced by similar functionality from the modular QoS CLI (MQC), which is a set of a platform-independent commands for configuring QoS.

The following commands were modified: custom-queue-list , fair-queue (WFQ) , frame-relay adaptive-shaping (becn keyword), frame-relay adaptive-shaping (foresight keyword), frame-relay bc , frame-relay be , frame-relay cir , frame-relay congestion threshold de , frame-relay congestion threshold ecn , frame-relay custom-queue-list , frame-relay fair-queue , frame-relay fecn-adapt , frame-relay ip rtp priority , frame-relay priority-group , frame-relay qos-autosense , ip rtp priority , max-reserved-bandwidth , priority-group , random-detect , random-detect dscp , random-detect (dscp-based keyword), random-detect exponential-weighting-constant , random-detect flow , random-detect flow average-depth-factor , random-detect flow count , random-detect (prec-based keyword), random-detect precedence , random-detect-group , show interfaces fair-queue , show interfaces random-detect , show queue , show queueing , show random-detect-group , show traffic-shape , show traffic-shape queue , show traffic-shape statistics .

Legacy QoS Command Deprecation: Hidden Commands

Cisco IOS XE Release 2.6

To streamline Cisco IOS XE QoS, certain commands have been hidden, which means that if you try to view a hidden command by entering a question mark (? ) at the command line, the command does not appear. However, if you know the command syntax, you can enter it. These commands will be removed in a future release.

The functionality provided by these hidden commands is replaced by similar functionality from the modular QoS CLI (MQC), which is a set of a platform-independent commands for configuring QoS.

The following commands were modified: custom-queue-list , fair-queue (WFQ) , frame-relay adaptive-shaping (becn keyword), frame-relay adaptive-shaping (foresight keyword), frame-relay bc , frame-relay be , frame-relay cir , frame-relay congestion threshold de , frame-relay congestion threshold ecn , frame-relay custom-queue-list , frame-relay fair-queue , frame-relay fecn-adapt , frame-relay ip rtp priority , frame-relay priority-group , frame-relay qos-autosense , ip rtp priority , max-reserved-bandwidth , show interfaces fair-queue , show interfaces random-detect , show queue , show queueing , show traffic-shape , show traffic-shape queue , show traffic-shape statistics .

Legacy QoS Command Deprecation: Removed Commands

Cisco IOS XE Release 3.2S

The legacy QoS commands were removed. This means that you must use the appropriate replacement MQC commands.

The following commands were removed: custom-queue-list , fair-queue (WFQ) , frame-relay adaptive-shaping (becn keyword), frame-relay adaptive-shaping (foresight keyword), frame-relay bc , frame-relay be , frame-relay cir , frame-relay congestion threshold de , frame-relay congestion threshold ecn , frame-relay custom-queue-list , frame-relay fair-queue , frame-relay fecn-adapt , frame-relay ip rtp priority , frame-relay priority-group , frame-relay qos-autosense , ip rtp priority , max-reserved-bandwidth , show interfaces fair-queue , show interfaces random-detect , show queue , show queueing , show traffic-shape , show traffic-shape queue , show traffic-shape statistics .