L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 25.1.x, 25.2.x, 25.3.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: September 5, 2025

New and Changed VPN Features

This table summarizes the new and changed feature information for the L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, and tells you where they are documented.

New and Changed VPN Features

Table 1. VPN Features Added or Modified in IOS XR Release 25.x.x
Feature	Description	Changed in Release	Where Documented
EVPN MPLS Seamless Integration with VPLS	This feature is modified.	Release 25.3.1	EVPN MPLS Seamless Integration with VPLS
EVPN Seamless Integration with VPWS	This feature is modified.	Release 25.3.1	EVPN Seamless Integration with VPWS
GRE lite mode	This feature is modified.	Release 25.3.1	GRE lite mode
EVPN port-active manual switchover and swap DF role	This feature is introduced.	Release 25.2.1	EVPN port-active manual switchover and swap DF role
Layer 2 fast reroute	This feature is introduced.	Release 25.1.1	Layer 2 fast reroute for E-Line services

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)