Overview
This chapter explains how to configure and verify Raman tuning and interpret status and parameter details. It covers tuning modes, activation conditions, and operating with OTDR lock and OSRI to support troubleshooting.
| Feature Name | Release Information | Description |
|---|---|---|
| Raman Tuning Manual Mode |
Cisco IOS XR Release 7.11.1 |
You can now configure Raman Tuning in manual mode to not initiate tuning automatically. You can initiate tuning manually. This feature gives you the flexibility to initiate tuning and not have Raman Tuning run every time there is a span-up event in the network. |
Raman tuning
This topic explains the concept of Raman tuning, its purpose, and operational behavior, and the conditions under which automatic tuning is initiated.
Configure Raman tuning
This topic explains Raman tuning configuration options on the NCS 1010 and directs you to tasks for automatic, manual, and parameter-based setup.
Verify Raman tuning configuration and status
This topic explains how to verify Raman tuning configuration and operational status by using available verification tasks to review tuning state, historical events, and Raman pump parameter values, helping you confirm correct operation and identify potential issues.
Raman tuning with OTDR lock and OSRI
This topic explains how Raman tuning operates in coordination with OTDR lock and OSRI to prevent interference between tuning and OTDR scanning, ensure optical safety, and protect personnel during high-power Raman tuning operations across a fiber span.