Step 1

Choose Administration > Settings > System Settings > General > Prime Data Migration Tool, and then click Launch Prime Data Migration Tool to open Prime Infrastructure - Prime Data Migration Tool page.

Step 2

Click Job history, in the top-right corner of the Prime Data Migration Tool to view Job Id, Cisco DNA Center IP, Start Time, End Time, and Status in the Prime Data Migration Job History window. The job summary displays only the latest 100 jobs.

Step 3

Click Add Cisco DNA Center Server.

Step 4

Enter the following Cisco DNA Center server details:

1. Server IP Address or Hostname.

2. Username.

3. Password.

4. Confirm Password.

Step 5

Click Save, to check server reachability.

Step 6

(Optional) Click Multi Server Settings, to archive, and restore the data that is migrated from Prime Infrastructure to DNA Center. It is recommended to use this option after Force Sync.

Step 7

Click Next to go to Sync Settings.

Step 8

In the Sync Settings window:

1. You can check for the Supported or Available Limits of the Cisco DNA Center server for the Site Groups/Site Maps , Devices, and Templates. Supported or Available Limits of Cisco DNA Center vareis based on the Cisco DNA Center server cores count.

   The Supported/Available limits are specified in the following table:

   Table 1. Supported/Available Limits

   DNAC Core	Site Groups/Site Maps	Devices	Templates
   44-Core	500	1000	1000
   56-Core	1000	4000	1000
   112-Core	2000	5000	1000

2. Check the Enables automatic synchronization of data integrated with Cisco DNA Center check box to synchronize already migrated data set for the groups and devices from Prime Infrastructure to Cisco DNA Center automatically post modification.

3. Select the Include newly added data during dynamic synchronization check box to move newly created groups and newly added devices during dynamic synchronization if any, from Prime Infrastructure to Cisco DNA Center automatically post addition.

   Note

   Dynamic Synchronization does not support add, update or delete operations for the already migrated data and will not synchronize the data automatically for the following components: Maps CLI Templates ISE Server Maps, CLI templates, and ISE server migration is achieved only by Force Sync. This check box is enabled only if you select the Enables automatic synchronization of data integrated with Cisco DNA Center check box. During force synchronization, if the Enables automatic synchronization of data integrated with Cisco DNA Center check box is enabled, any modifications that are made through force synchronization to the Location Group and Devices entities are dynamically synced in Cisco DNA Center. If the Enables automatic synchronization of data integrated with Cisco DNA Center check box is selected, CMX is dynamically assigned to Cisco DNA Center floor groups, when Cisco Prime Infrastructure imports maps to CMX. (Pre Req.: CMX dynamic sync works only on already migrated floor groups and CMX should exist in Cisco DNA Center server for CMX dynamic sync.)

4. If you select the Enable CMX settings check box, CMX will be pushed with floor groups. If you do not select the Enable CMX settings check box, CMX data will not be pushed to the Cisco DNA Center server.

5. If you select the Enable ISE settings check box, ISE server details will be pushed. If you do not select the Enable ISE settings check box, ISE data will not be pushed to the Cisco DNA Center server.

6. Select the Migrate User Defined CLI Templates check box to migrate the user-defined CLI and/or Composite Templates to Cisco DNA Center.

Step 9

Click Next to go to the Select Groups page.

Step 10

In the Select Groups window:

1. If you want to delete only the mapping from Prime data migration to Cisco DNA Center and retain the instances of migrated sites in the DNA Center for the current force sync, uncheck the Delete sites in Cisco DNA Center for the current Force Sync check box.

2. Check the Delete sites in Cisco DNA Center for the current Force Sync check box to delete the sites from Cisco DNA Center and remove the mapping from prime data migration to Cisco DNA Center for the current force sync.

3. If you want to move an entire group hierarchy to Cisco DNA Center, check the Replicate Parent Hierarchy check box and select the location groups in the Prime Infrastructure Location Groups pane.

   By default, when you select Site Groups, the buildings, floors, and associated maps are also selected.

   Click Select DNAC Parent below the Prime Infrastructure Location Groups pane to open the Cisco DNA Center Site Groups window.

   Marked for Deletion label appears when you unselect an already migrated group.

   Select Global from the Cisco DNA Center Site Groups pane under which you want to move the PI groups and click OK. The selected groups will be added in the Group Movement Log pane with the label as Marked for Migration.

4. If you want to move only a building or a floor to Cisco DNA Center under a different campus or area, click Select DNAC Parent below the Prime Infrastructure Location Groups pane to open the Cisco DNA Center Site Groups window.

   Select a campus or an area from Cisco DNA Center Site Groups under which you need to move the building and select a building from Cisco DNA Center Site Groups under which you need to move the floor and click OK. The selected groups will be added in the Group Movement Log pane with the label as Marked for Migration.

Step 11

Click Next.

Step 12

In the ISE & CMX Credentials window:

1. Click the ISE tab to view the ISE server details that are present in Prime Infrastructure such as:

   • Server Status

   • Server IP

   • Port

   • Server Name

   • Username

   • Shared Secret: You must ensure that this shared secret field is not empty.

   • Timeout: This value must not exceed 20.

   • Retries

   If no ISE server is present in Prime Infrastructure, a No data available message appears.

2. Click the CMX tab to can view the list of associated CMX servers for selected groups with the following details:

   • Credential Status

   • Server IP address

   • Device Name

   • Username

   • Password

   • SSH Username

   • SSH Password

   You must update the SSH Username and SSH Password, if it is not available for the respective CMX.

   If the associated CMX is not found, then click Next

   Note	When the Cisco Prime Infrastructure – Cisco DNA Center migration tool is active and auto sync is enabled, then CMX will be dynamically pushed to Cisco DNA Center floor groups. Cisco DNA Center will there by track the location data for assigned groups.

Step 13

If you check the Migrate User Defined CLI Templates check box in the Sync Settings page, then a new page Select CLI Templates appears after the CMX page.

Step 14

In the Select CLI Templates window:

1. Non-Migrated templates list all the available CLI or Composite User Defined Templates available in Prime Infrastructure. You can select the templates need to be migrated to Cisco DNA Center.

2. Migrated templates list all the migrated templates available in Cisco DNA Center. You can either update or delete these templates.

   Note	By default all the rows are selected. Selected templates from the list are updated and the deselected templates are deleted from Cisco DNA Center.

Step 15

Click Next.

Step 16

In the Summary window:

1. You can view the overall summary of selected location groups, devices, associated maps, user-defined templates, CMX sesrvers, and ISE servers before migrating to the Cisco DNA Center.

2. Click the CLI templates tab to view the selected CLI templates listed here. Based on the device selection in the groups you can Add/Update or Delete the CLI/Composite user defined Templates in Cisco DNA Center.

3. In the Sync Settings tab, you can view the summary of the sync status.

Step 17

Click Force Sync to push data to the Cisco DNA Center server after the first migration.