The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Note: The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product.
This document describes the features, issues, and limitations of Cisco NX-OS software Release 10.4(5)M for use on the Cisco Nexus 9000 Series switches.
Date |
Description |
March 04, 2025 |
Release 10.4(5)M became available. |
There are no new software features introduced in Cisco NX-OS Release 10.4(5)M.
There are no new hardware features introduced in Cisco NX-OS Release 10.4(5)M.
Release Image
In Cisco NX-OS Release 10.4(5)M, the following two 64-bit images are supported:
● The 64-bit Cisco NX-OS image filename with “nxos64-cs” as the prefix (for example, nxos64-cs.10.4.4.M.bin) is supported on all Cisco Nexus 9000 series switches except Cisco Nexus 9500 -R and -R2 switches and cards.
● The 64-bit Cisco NX-OS image filename with "nxos64-msll” as the prefix (for example, nxos64-msll.10.4.4.M.bin) is supported on Cisco Nexus 9000 Series -R and -R2 modular switches.
Note: The 32-bit image is no longer supported.
Click the bug ID to access the Bug Search Tool and see additional information about the bug.
Bug ID |
Headline |
IPV6 RNH is not updated after ipv6 neighbors are cleared |
Resolved Issues
Click the bug ID to access the Bug Search Tool and see additional information about the bug.
Bug ID |
Headline |
N9K - Micron 5300 & 5100 Read-Only Bootflash |
|
Ctrl +C is not stopping immediately for "show tech-sup module all" on multiple platforms, vsh crash |
|
debug service-core module module sap sap-id frame-count num doesn't work |
|
VSH Crash when tunnel-encryption show command is used |
|
All dom supported xcvrs show DOMs as N/A on post ND ISSU |
|
Seeing tahusd core on sanity129-tor2/N9K-C93600CD-GX |
|
syslogd MTS build up leading to copy run start / show cli failure |
|
Vulnerabilities in rpcbind 0.2.4 |
|
svi is taking longer to come up on GIR/vpc domain no shut on primary |
|
Delayed linkup seen with 40g or 100g on specific retimer ports |
|
NLB Source traffic failed to forward and gets flooded within nlb vlan |
|
IGMP proxy reports not generated for L2TRM |
|
N9K: 'show system internal access-list globals' contains unexpected output |
|
N9K-X9636C-RX: Traffic Punt with default route + uRPF |
|
Dispute detected with Peer-switch enabled on non-root |
|
MTM Crash after touching scale of 270K mac in L2 heavy mode |
|
Cisco NX-OS Software Image Verification Bypass Vulnerability |
|
Nexus 9500 mgmt0 interface reverts to 100m after upgrade |
|
EVPN prefix fails to advertise when dup paths with same GWIPs are shared between RR via iBGP |
|
n9k/vpc - VPC MAC table may have out of sync with high mac scale after peer link flap |
|
VLAN Tag on GRE tunneled traffic is changed to Native VLAN for broadcast traffic on N9K |
|
n9k: Incorrect static route after NH move between VPC peers in VPC fabric peering |
|
under router ospf, no redistribute < proto > without route-map is not working |
|
under ospfv3 address-family ipv6, no redistribute proto without route-map is not working |
|
Implement recovery mechanism for traffic going over same incoming interface |
|
N9K/OSPF route was not installed in route table |
|
SNMP trap not generated on MGMT port using IPv6 address |
|
Proactive IP SLA not able to be configured |
|
Retimer show commands hog CSUSD main thread, client apps could get killed. |
|
TCAM exhaustion caused by ACL configuration pushed through NETCONF results in DME sync issues |
|
New L3VNID config automatically gets added to the running and startup post upgrade to 10.2 code |
|
N9K: Modification failed for NBM flow policy name with the character '/' |
|
On FX3-based N9K switches, SFP-10G-T-X not coming back up after link down |
|
IPv4 policy route-map (PRM) cannot be removed from SVIs If TCAM reaches high utilization |
|
Traffic not forwarded in LACP port-channel with 2 active FEX HIF interfaces |
|
Incorrect command "show logging log file" included in "show tech ngoam" |
|
Incorrect CR patch for bmp-server initial-refresh delay <> |
|
LACP/ETHPM REINIT Flap Brings Down All Interfaces of a 400G Breakout |
|
DLC is not triggered after SMU installation NXOS. |
|
Docker file filling up /var/volatile/log causing logging stops |
|
Routes for which RNH is covered by the route's prefix are "pending ufdm" after RNH is lost. |
|
Not possible to remove "license smart proxy" from starting-configuration |
|
N9K "copy bootflash:<X.ncl> run" of "conf sess vty-acl" results in "Failed to complete Verification" |
|
Service "port-profile" crashes due to a memory leak |
|
Disclosure of local user password in AAA server logs |
|
IPv6 ACL Miss Programmed Blocking ICMP Echo-Reply Type 129 |
|
Memory leak in SNMP due to libutils.so |
|
MPLS Labeled destination traffic dropped on N9k EOR with RX line card |
|
Not able to delete a numeric user from the commandline. |
|
N9K/TRM/new L3VNI mode - The secondary vPC does not forward multicast traffic in a failover scenario |
|
NxOS IPv6 Static Route remains valid when interface to reach next-hop is down |
|
N9500-R hardware application counters may get corrupted |
|
N9K-GX2/HX Links fail to come up |
|
BGP sends out updates 20+ sec after BGP session is up in peer scale setup |
|
N9K-R Stale MPLS Labels attached to URIB even after LDP flushed labels for prefixes |
|
N9K-GX2 - CSUSD HAP Reset with no core or stack-trace |
|
Need remove the 44B trailer from IPv6 BFD control packets |
|
L3 MTU misprogramming on Nexus 9500 after upgrading to 10.3(6)M |
|
N9K - "ip pim rp-candidate" command shows as "ip pim bsr rp-candidate" in running-config |
|
root command polling data after customer enabling Suzieq poller |
|
N9K experiences an unexpected reload with tahusd hap reset |
|
NX-OS PIM Bidir DF loser on both sides due to Nexus sending the wrong metric. |
|
EBGP peering between vPC Border Leaf VTEP and an external Layer3 fails during failover scenario |
|
ALL BFD neighbors down after upgrading from 10.4.2 to 10.4.4(M) |
|
vPC LACP Lag-ID mis matched issues when reconfiguration vPC domain. |
|
The 'class-map' configuration differs between the show run all and show startup commands |
|
Policy based routing not applied after configure replace |
|
Auto-negotiation is not supported on C93180YC-FX3 with 100G DAC cable on port with macsec enabled |
|
network-operator execute commands for admin after removing VSA on Radius-server |
|
N9K-X9716D-GX - Sensor/MTM/Port-Client crash when faulty QSFP-DD is present. |
|
Silent Failure Issuing Factory-Reset of FM-G Module |
|
"Show flow tracer" command stops working after upgrade to 10.3(x) and above. |
|
ospf configuration mismatch in 10.3(5) |
|
Broadcast Traffic is Blackholed When the Primary Parent Switch is in Maintenance Mode |
|
Traffic destined for IP ending in 136.204 do not reach the 9K SW FEX, not in ELAM |
|
NBM interfaces attributes missing in telemetry data streamed from N9K in 10.3(6) |
|
Nexus removing IPv4 address from CDP details after IPv6 is configured |
|
Upgrade fails from 9.3.14 to 10.3.6 when cli alias name command present |
|
ERROR: Failed to write VSH commands. |
|
Nexus 9500 floods LSA type 7 for default route with Max age post switchover |
|
When performing a config replace statement under router OSPF not applied |
|
Unable to enable "feature netflow" |
|
YANG models distributed for NX-OS 10.4.4 are not getting through validation |
|
"switchport mac-learn disable" doesn't work in EX platform |
|
system vrf-member-change retain-l3-config fails to create new VRF with "vrf member" |
|
Crash on C9364D-GX2A while printing transceiver information |
|
ERROR: Cannot apply config on a port that is already a member of a port channel |
Click the bug ID to access the Bug Search Tool and see additional information about the bug.
Bug ID |
Description |
DME CC failure for multisite virtual rmac |
|
Loopback Ping is not working after enabling MPLS LDP at Interface |
|
Third Party 40G SWDM4 transceiver may take between 40-60 secs to link up |
|
URIB crashed on urib_chlist_segv_handler after restarting bgp and urib together |
|
ESG_SGACL: Source of MAC detail is not seen in json output of MAC table |
|
queue-limit dynamic 0 drops packets with minimal traffic on interface |
|
slight drop in L2 multicast performance in N9K-C9364C-H1 switch |
|
With NDFC/auto-config, VPC peer-link stays down on disable 'feature tunnel-encryption' |
|
'The BGP instance is not in expected state' after quick bgp unconfig / reconfig with 700K ipv4 pfx |
|
TTL is not decremented for decap L3 VPN traffic on N9K-C9800.
|
|
DME inconsistency in sys/mplsta-[eth1/7/1] object after some CLI sequence
|
Device Hardware
The following tables list the Cisco Nexus 9000 Series hardware that Cisco NX-OS Release 10.4(5)M supports. For additional information about the supported hardware, see the Hardware Installation Guide for your Cisco Nexus 9000 Series device.
Table 1. Cisco Nexus 9800 Switches
Product ID |
Description |
N9K-C9808 |
16-RU modular switch with slots for up to 8 Line Cards in addition to 2 supervisors, 8 fabric modules, 4 fan trays, and 3 power trays. |
N9K-C9804 |
10-RU modular switch with slots for up to 4 Line Cards in addition to 2 supervisors, 8 fabric modules, 4 fan trays, and 2 power trays. |
Table 2. Cisco Nexus 9800 Series Line Cards
Product ID |
Description |
N9K-X9836DM-A |
Cisco Nexus 9800 36-port 400G QSFP-DD Line Card with MACsec. |
N9K-X98900CD-A |
Cisco Nexus 9800 14-port 400G QSFP-DD + 34-port 100G QSFP28 Line Card. |
Table 3. Cisco Nexus 9800 Series Fabric Modules
Product ID |
Description |
N9K-C9808-FM-A |
Cisco Nexus 9800 Fabric Module for 8-slot Chassis |
N9K-C9804-FM-A |
Cisco Nexus 9800 Fabric Module for 4-slot Chassis |
Table 4. Cisco Nexus 9800 Supervisor Module
Product ID |
Description |
N9K-C9800-SUP-A |
Cisco Nexus 9800 Platform Supervisor Module |
Table 5. Cisco Nexus 9800 Fans and Fan Trays
Product ID |
Description |
N9K-C9808-FAN-A |
Cisco Nexus 9800 8-slot chassis fan tray (1st Generation) |
N9K-C9804-FAN-A |
Cisco Nexus 9800 4-slot chassis fan tray (1st Generation) |
Table 6. Cisco Nexus 9800 Power Supplies
Product ID |
Description |
NXK-HV6.3KW20A-A |
Cisco Nexus 9800 6,300W 20A AC and HV Power Supply |
Table 7. Cisco Nexus 9500 Switches
Product ID |
Description |
N9K-C9504 |
7-RU modular switch with slots for up to 4 Line Cards in addition to two supervisors, 2 system controllers, 3–6 fabric modules, 3 fan trays, and up to 4 power supplies. |
N9K-C9508 |
13-RU modular switch with slots for up to 8 Line Cards in addition to two supervisors, 2 system controllers, 3–6 fabric modules, 3 fan trays, and up to 8 power supplies. |
N9K-C9516 |
21-RU modular switch with slots for up to 16 Line Cards in addition to two supervisors, 2 system controllers, 3–6 fabric modules, 3 fan trays, and up to 10 power supplies. |
Table 8. Cisco Nexus 9500 Cloud Scale Line Cards
Product ID |
Description |
Maximum Quantity |
||||
Cisco Nexus 9504 |
Cisco Nexus 9508 |
Cisco Nexus 9516 |
||||
N9K-X9716D-GX |
Cisco Nexus 9500 16-port 400G QSFP-DD Line Card |
4 |
8 |
N/A |
||
N9K-X9736C-FX |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
N9K-X9788TC-FX |
Cisco Nexus 9500 48-port 1/10-G BASE-T Ethernet and 4-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
N9K-X97160YC-EX |
Cisco Nexus 9500 48-port 10/25-Gigabit Ethernet SFP28 and 4-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
N9K-X9732C-FX |
Cisco Nexus 9500 32-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
N9K-X9732C-EX |
Cisco Nexus 9500 32-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
N9K-X9736C-EX |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
Table 9. Cisco Nexus 9500 R-Series Line Cards
Product ID |
Description |
Maximum Quantity |
||
Cisco Nexus 9504 |
Cisco Nexus 9508 |
|||
N9K-X9636C-R |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
|
N9K-X9636C-RX |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
|
N9K-X9636Q-R |
Cisco Nexus 9500 36-port 40-Gigabit Ethernet QSFP Line Card |
4 |
8 |
|
N9K-X96136YC-R |
Cisco Nexus 9500 16-port 1/10 Gigabit, 32-port 10/25 Gigabit, and 4-port 40/100 Gigabit Ethernet Line Card |
4 |
8 |
|
N9K-X9624D-R2 |
Cisco Nexus 9500 24-port 400-Gigabit QDD Line Card |
Not supported |
8 |
|
Table 10. Cisco Nexus 9500 Cloud Scale Fabric Modules
Product ID |
Description |
Minimum |
Maximum |
N9K-C9504-FM-E |
Cisco Nexus 9504 100-Gigabit cloud scale fabric module |
4 |
5 |
N9K-C9504-FM-G |
Cisco Nexus 9500 4-slot 1.6Tbps cloud scale fabric module |
4 |
5 |
N9K-C9508-FM-E |
Cisco Nexus 9508 100-Gigabit cloud scale fabric module |
4 |
5 |
N9K-C9508-FM-E2 |
Cisco Nexus 9508 100-Gigabit cloud scale fabric module |
4 |
5 |
N9K-C9508-FM-G |
Cisco Nexus 9500 8-slot 1.6Tbps cloud-scale fabric module |
4 |
5 |
N9K-C9516-FM-E2 |
Cisco Nexus 9516 100-Gigabit cloud scale fabric module |
4 |
5 |
Table 11. Cisco Nexus 9500 R-Series Fabric Modules
Product ID |
Description |
Minimum |
Maximum |
N9K-C9504-FM-R |
Cisco Nexus 9504 100-Gigabit R-Series fabric module |
4 |
6 |
N9K-C9508-FM-R |
Cisco Nexus 9508 100-Gigabit R-Series fabric module |
4 |
6 |
N9K-C9508-FM-R2 |
Cisco Nexus 9508 400-Gigabit R-Series fabric module |
4 |
6 |
Table 12. Cisco Nexus 9500 Supervisor Modules
Supervisor |
Description |
Maximum |
N9K-SUP-A |
1.8-GHz supervisor module with 4 cores, 4 threads, and 16 GB of memory |
2 |
N9K-SUP-A+ |
1.8-GHz supervisor module with 4 cores, 8 threads, and 16 GB of memory |
2 |
N9K-SUP-B |
2.2-GHz supervisor module with 6 cores, 12 threads, and 24 GB of memory |
2 |
N9K-SUP-B+ |
1.9-GHz supervisor module with 6 cores, 12 threads, and 32 GB of memory |
2 |
Note: N9K-SUP-A and N9K-SUP-A+ are not supported on Cisco Nexus 9504 and 9508 switches with -R and -R2 Line Cards.
Table 13. Cisco Nexus 9500 System Controller
Product ID |
Description |
Quantity |
N9K-SC-A |
Cisco Nexus 9500 Platform System Controller Module |
2 |
Table 14. Cisco Nexus 9500 Fans and Fan Trays
Product ID |
Description |
Quantity |
N9K-C9504-FAN |
Fan tray for 4-slot modular chassis |
3 |
N9K-C9504-FAN2 |
Fan tray that supports the Cisco N9K-C9504-FM-G fabric module |
3 |
N9K-C9508-FAN |
Fan tray for 8-slot modular chassis |
3 |
N9K-C9508-FAN2 |
Fan tray that supports the Cisco N9K-C9508-FM-G fabric module |
3 |
N9K-C9516-FAN |
Fan tray for 16-slot modular chassis |
3 |
Table 15. Cisco Nexus 9500 Fabric Module Blanks with Power Connector
Product ID |
Description |
Minimum |
Maximum |
N9K-C9504-FAN-PWR |
Cisco Nexus 9500 4-slot chassis 400G cloud scale fan tray power connector |
1 |
2 |
N9K-C9508-FAN-PWR |
Cisco Nexus 9500 4-slot chassis 400G cloud scale fan tray power connector |
1 |
2 |
Table 16. Cisco Nexus 9500 Power Supplies
Product ID |
Description |
Quantity |
Cisco Nexus Switches |
N9K-PAC-3000W-B |
3-KW AC power supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
N9K-PDC-3000W-B |
3-KW DC power supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
N9K-PUV-3000W-B |
3-KW Universal AC/DC power supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
N9K-PUV2-3000W-B |
3.15-KW Dual Input Universal AC/DC Power Supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
Table 17. Cisco Nexus 9400 Switches
Product ID |
Description |
N9K-C9408 |
4-RU, 8-slot centralized modular chassis switch, which is configurable with up to 128 200-Gigabit QSFP56 (256 100 Gigabit by breakout) ports or 64 400-Gigabit ports. |
N9K-C9400-SUP-A |
Cisco Nexus 9400 Supervisor Card |
N9K-C9400-SW-GX2A |
Cisco Nexus 9400 25.6Tbps Switch Card |
N9K-X9400-8D |
Cisco Nexus 9400 8p 400G QSFP-DD LEM |
N9K-X9400-16W |
Cisco Nexus 9400 16p 200G QSFP56 LEM |
N9K-X9400-22L |
Cisco Nexus 9400 LEM with 22 10G/25G/50G ports. |
Table 18. Cisco Nexus 9200 and 9300 Switches
Cisco Nexus Switch |
Description |
N9K-C92348GC-X |
The Cisco Nexus 92348GC-X switch (N9K-C92348GC-X) is a 1-RU switch that supports 696 Gbps of bandwidth and over 250 mpps. The 1GBASE-T downlink ports on the 92348GC-X can be configured to work as 100 Mbps, 1-Gbps ports. The 4 ports of SFP28 can be configured as 1/10/25-Gbps and the two-ports of QSFP28 can be configured as 40- and 100-Gbps ports. The Cisco Nexus 92348GC-X is ideal for Big Data customers that require a Gigabit Ethernet ToR switch with local switching. |
N9K-C93400LD-H1 |
1-RU fixed-port, L2/L3 switch with 48 50G SFP56 ports and 4 400G QSFP-DD uplink ports. |
N9K-C93108TC-FX3 |
1 RU fixed-port switch Forty-eight 100M/1G/10GBASE-T ports (ports 1–48), Six 40/100-Gigabit ports QSFP28 (ports 49–54), Two management ports (one 10/100/1000BASE-T port and one SFP port), One console port (RS-232), and one USB port. |
N9K-C9332D-H2R |
1-RU fixed-port switch with 400-Gigabit QSFP-DD ports (32), 10-Gigabit SFP+ ports (2), Management ports (one 10/100/1000BASE-T port and one SFP port), console port (RS-232), and USB port. |
N9K-C9348GC-FX3 |
1 RU fixed-port switch 48 10/100/1000M copper RJ-45 downlink ports, 4 10-/25G SFP28 uplink ports, and 2 40-/100G QSFP28 uplink ports. |
N9K-C9348GC-FX3PH |
1-RU fixed-port switch 40 10M/100M/1G copper RJ-45 downlink ports that support PoE/PoE+/PoE++ and 8 10M/100M copper RJ-45 downlink ports that support PoE/PoE+/PoE++, 4 10-/25G SFP28 uplink ports, and 2 40-/100G QSFP28 uplink ports. |
N9K-C93180YC-FX3H |
1-RU fixed-port switch with 24 100M/1/10/25-Gigabit Ethernet SFP28 ports (ports 1–24), 6 10/25/40/50/100-Gigabit QSFP28 ports (ports 49–54), One management port (one 10/100/1000BASE-T port), and One console port (RS-232) |
N9K-C9316D-GX |
1-RU switch with 16x400/100/40-Gbps ports. |
N9K-C9364C-GX |
2-RU fixed-port switch with 64 100-Gigabit SFP28 ports. |
N9K-C93600CD-GX |
1-RU fixed-port switch with 28 10/40/100-Gigabit QSFP28 ports (ports 1–28), 8 10/40/100/400-Gigabit QSFP-DD ports (ports 29–36) |
N9K-C9364C |
2-RU Top-of-Rack switch with 64 40-/100-Gigabit QSFP28 ports and 2 1-/10-Gigabit SFP+ ports.
● Ports 1 to 64 support 40/100-Gigabit speeds.
● Ports 49–64 support MACsec encryption.
● Ports 651–64and66 support 1/10 Gigabit speeds.
|
N9K-C9364C-H1 |
2-RU fixed-port switch with 64 100G SFP28 ports. |
N9K-C9332C |
1-RU fixed switch with 32 40/100-Gigabit QSFP28 ports and 2 fixed 1/10-Gigabit SFP+ ports. |
N9K-C9332D-GX2B |
1-Rack-unit (1-RU) spine switch with 32p 400/100-Gbps QSFP-DD ports and 2p 1/10 SFP+ ports. |
N9K-C9348D-GX2A |
48p 40/100/400-Gigabit QSFP-DD ports and 2p 1/10G/10G SFP+ ports |
N9K-C9364D-GX2A |
64p 400/100-Gigabit QSFP-DD ports and 2p 1/10 SFP+ ports |
N9K-C93180YC-FX3 |
48 1/10/25 Gigabit Ethernet SFP28 ports (ports 1–48) 6 10/25/40/50/100-Gigabit QSFP28 ports (ports 49–54) |
N9K-C93180YC-FX3S |
48 1/10/25 Gigabit Ethernet SFP28 ports (ports 1–48) 6 10/25/40/50/100-Gigabit QSFP28 ports (ports 49–54) |
N9K-C9336C-FX2-E |
1-RU switch with 36 40-/100-Gb QSFP28 ports |
N9K-C9336C-FX2 |
1-RU switch with 36 40-/100-Gb Ethernet QSFP28 ports |
N9K-C93360YC-FX2 |
2-RU switch with 96 10-/25-Gigabit SFP28 ports and 12 40/100-Gigabit QSFP28 ports |
N9K-C93240YC-FX2 |
1.2-RU Top-of-Rack switch with 48 10-/25-Gigabit SFP28 fiber ports and 12 40-/100-Gigabit Ethernet QSFP28 ports. |
N9K-C93216TC-FX2 |
2-RU switch with 96 100M/1G/10G RJ-45 ports, 12 40/100-Gigabit QSFP28 ports, 2 management ports (one RJ-45 and one SFP port), 1 console port, and 1 USB port. |
N9K-C93180YC-FX |
1-RU Top-of-Rack switch with 10-/25-/32-Gigabit Ethernet/FC ports and 6 40-/100-Gigabit QSFP28 ports. You can configure the 48 ports as 1/10/25-Gigabit Ethernet ports or as FCoE ports or as 8-/16-/32-Gigabit Fibre Channel ports. |
N9K-C93180YC-FX-24 |
1 RU 24 1/10/25-Gigabit Ethernet SFP28 front panel ports and 6 fixed 40/100-Gigabit Ethernet QSFP28 spine-facing ports. The SFP28 ports support 1-, 10-, and 25-Gigabit Ethernet connections and 8-, 16-, and 32-Gigabit Fibre Channel connections. |
N9K-C93108TC-FX |
1-RU Top-of-Rack switch with 48 100M/1/10GBASE-T (copper) ports and 6 40-/100-Gigabit QSFP28 ports |
N9K-C93108TC-FX-24 |
1 RU 24 1/10GBASE-T (copper) front panel ports and 6 fixed 40/100-Gigabit Ethernet QSFP28 spine-facing ports. |
N9K-C93108TC-FX3P |
1-RU fixed-port switch with 48 100M/1/2.5/5/10GBASE-T ports and 6 40-/100-Gigabit QSFP28 ports |
N9K-C9348GC-FXP [1] |
Cisco Nexus 9300 with 48p 100M/1 G, 4p 10/25 G SFP+ and 2p 100 G QSFP |
Table 19. Cisco Nexus 9200 and 9300 Fans and Fan Trays
Product ID |
Description |
Quantity |
Cisco Nexus Switches |
NXA-SFAN-30CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
9348GC-FX3 |
NXA-SFAN-30CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
9348GC-FX3 |
NXA-SFAN-30CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
9348GC-FX3PH |
NXA-SFAN-30CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
9348GC-FX3PH |
NXA-SFAN-35CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
6
5
4 |
9332D-H2R
93400LD-H1
93108TC-FX3 |
NXA-SFAN-35CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
6
5
4 |
9332D-GX2B
93400LD-H1
93108TC-FX3 |
NXA-SFAN-35CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
6 |
9332D-GX2B |
NXA-FAN-160CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
9364C [2] |
NXA-FAN-160CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
9364C [1] 93360YC-FX2 |
NXA-FAN-160CFM2-PE |
Fan module with port-side exhaust airflow (blue coloring) |
4 |
9364C-GX |
NXA-FAN-160CFM2-PI |
Fan module with port-side intake airflow (burgundy coloring) |
4 |
9364C-GX |
NXA-FAN-30CFM-B |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
|
NXA-FAN-30CFM-F |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
|
NXA-FAN-35CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
4
6 |
92300YC [1] 9336C-FX2-E
|
NXA-FAN-35CFM-PI |
Fan module with port-side intake airflow (burgundy coloring)
Fan module with port-side exhaust airflow (blue coloring) |
4
6
6 |
92300YC [1] 9316D-GX
9336C-FX2-E |
NXA-FAN-65CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
|
NXA-FAN-65CFM-PI |
Fan module with port-side exhaust airflow (burgundy coloring) |
3 |
93240YC-FX2 |
Table 20. Cisco Nexus 9200 and 9300 Power Supplies
Product ID |
Description |
Quantity |
Cisco Nexus Switches |
NXA-PDC-715W-PI |
715-W DC power supply with port-side intake airflow (blue coloring) |
2 |
93108TC-FX3P |
NXA-PDC-440W-PE |
440-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
9348GC-FX3 |
NXA-PDC-440W-PI |
440-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
NXA-PHV-350W-PE |
350-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9348GC-FX3 |
NXA-PHV-350W-PI |
350-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
NXA-PAC-350W-PE2 |
350-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9348GC-FX3 |
NXA-PAC-350W-PI2 |
350-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
NXA-PAC-1900W-PE |
1900-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
NXA-PAC-1900W-PI |
1900-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
NXA-PHV-2KW-PI |
2000-W HVDC power supply with port-side intake airflow (burgundy coloring) |
2 |
9332D-H2R 93400LD-H1 |
NXA-PAC-1500W-PE |
1500-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9332D-GX2B |
NXA-PAC-1500W-PI |
1500-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9332D-GX2B |
NXA-PAC-500W-PE |
500-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93180YC-FX |
NXA-PAC-500W-PI |
500-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93180YC-FX |
NXA-PAC-650W-PE |
650-W AC power supply with port-side exhaust (blue coloring) |
2 |
92300YC 93180YC-FX3H |
NXA-PAC-650W-PI |
650-W AC power supply with port-side intake (burgundy coloring) |
2 |
92300YC 93180YC-FX3H |
NXA-PAC-750W-PE |
750-W AC power supply with port-side exhaust airflow (blue coloring) 1 |
2 |
9336C-FX2 |
NXA-PAC-750W-PI |
750-W AC power supply with port-side intake airflow (burgundy coloring) 1 |
2 |
9336C-FX2 |
NXA-PAC-1100W-PE2 |
1100-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93240YC-FX2 |
NXA-PAC-1100W-PI2 |
1100-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93240YC-FX2 |
NXA-PAC-1100W-PI |
Cisco Nexus 9000 PoE 1100W AC PS, port-side intake |
2 |
93108TC-FX3P |
NXA-PAC-1100W-PE |
Cisco Nexus 9000 PoE 1100W AC PS, port-side exhaust |
2 |
93108TC-FX3P |
NXA-PAC-1900W-PI |
Cisco Nexus 9000 PoE 1900W AC PS, port-side intake |
2 |
93108TC-FX3P |
NXA-PAC-1200W-PE |
1200-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93360YC-FX2 |
NXA-PAC-1200W-PI |
1200-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93360YC-FX2 |
NXA-PAC-1400W-PE |
1400-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93400LD-H1 |
NXA-PAC-1400W-PI |
1400-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93400LD-H1 |
N9K-PUV-1200W |
1200-W Universal AC/DC power supply with bidirectional airflow (white coloring) |
2 |
92300YC |
NXA-PDC-930W-PE |
930-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
93360YC-FX2 |
NXA-PDC-930W-PI |
930-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
93360YC-FX2 |
NXA-PDC-1100W-PE |
1100-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
93240YC-FX2 |
NXA-PDC-1100W-PI |
1100-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
93240YC-FX2 |
NXA-PHV-1100W-PE |
1100-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93240YC-FX2 |
NXA-PHV-1100W-PI |
1100-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93240YC-FX2 |
NXA-PAC-2KW-PE |
2000-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9364C-GX
|
NXA-PAC-2KW-PI |
2000-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9364C-GX |
NXA-PDC-2KW-PE |
2000-W DC power supply with port-side exhaust airflow (blue coloring |
2 |
9364C-GX 93400LD-H1 |
NXA-PDC-2KW-PI |
2000-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
9364C-GX 9332D-H2R 93400LD-H1 |
N2200-PAC-400W |
400-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
92348GC-X |
N2200-PAC-400W-B |
400-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
92348GC-X |
N2200-PDC-350W-B |
350-W DC power supply with port-side intake airflow |
2 |
92348GC-X |
N2200-PDC-400W |
400-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
92348GC-X |
Fabric Module and Line Card compatibility details are listed below:
Table 21. Cisco Nexus 9500 Cloud Scale Line Cards
Product ID |
N9K-C9504-FM-G |
N9K-C9508-FM-G |
N9K-C9504-FM-E |
N9K-C9508-FM-E |
N9K-C9508-FM-E2 |
N9K-C9516-FM-E2 |
N9K-X9716D-GX |
4 |
4 |
No |
No |
No |
No |
N9K-X9736C-FX |
5 |
5 |
5 |
5 |
5 |
5 |
N9K-X97160YC-EX |
4 |
4 |
4 |
4 |
4 |
4 |
N9K-X9788TC-FX |
4 |
4 |
4 |
4 |
4 |
4 |
N9K-X9732C-EX |
4 |
4 |
4 |
4 |
4 |
4 |
N9K-X9732C-FX |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
Table 22. Cisco Nexus 9500 R-Series Line Cards
Product ID |
N9K-C9504-FM-R |
N9K-C9508-FM-R |
N9K-X9636C-RX |
6 |
6 |
N9K-X9636Q-R |
4 6 (n+2 redundancy) |
4 6 (n+2 redundancy) |
N9K-X9636C-R |
5 6 (n+1 redundancy) |
5 6 (n+1 redundancy) |
N9K-X96136YC-R |
6 |
6 |
Table 23. Cisco Nexus 9500 R2-Series Line Cards
Product ID |
N9K-C9508-FM-R2 |
N9K-X9624D-R2 |
6 |
For information about transceivers and cables supported on a switch, see the Transceiver Module (TMG) Compatibility Matrix. For the transceiver specifications and installation information, see the Install and Upgrade Guides.
Cisco Nexus Dashboard Insights for Data Center
Cisco NX-OS Release 10.4(5)M supports the Cisco Nexus Dashboard Insights on Cisco Nexus 9300-FX, 9300-FX2, 9300-FX3, 9300-GX, 9300-GX2, 9400, and 9800 platform switches and 9500 platform switches with -EX/FX/GX Line Cards. See the Cisco Nexus Insights documentation.
To perform a software upgrade or downgrade, follow the instructions in the Cisco Nexus 9000 Series NX-OS Software Upgrade and Downgrade Guide, Release 10.4(x). For information about an In Service Software Upgrade (ISSU), see the Cisco NX-OS ISSU Support Matrix.
Document Title |
Description |
Cisco Nexus 9000 Series Switches documentation |
|
Cisco NX-OS Software Release and Image-naming Convention |
|
Cisco Nexus 3000 and 9000 Series NXAPI REST SDK User Guide and API Reference |
Cisco Nexus 3000 and 9000 Series NX-NX-API REST SDK User Guide and API Reference |
· Cisco Nexus 9000 and 3000 Series NX-OS Switch License Navigator |
Licensing Information Note: When you downgrade from Cisco NX-OS Release 10.4(5)M to an earlier release, the features that use the ACI+NX-OS Essentials, Advantage, and add-on licenses or the Hardware Streaming Telemetry license continue to work in honor mode in the downgraded version. In addition, the output of the show license usage command continues to include entries for these unsupported licenses. |
Cisco Nexus 9000 Series NX-OS Software Upgrade and Downgrade Guide |
Cisco Nexus 9000 Series Software Upgrade and Downgrade Guide, Release 10.4(x) |
Cisco Nexus 9000 Series FPGA/EPLD Upgrade Release Notes, Release 10.4(5)M |
|
https://cisco.github.io/cisco-mibs/supportlists/nexus9000/Nexus9000MIBSupportList.html |
Cisco NX-OS Supported MIBs |
Supported FEX modules |
|
Cisco Nexus 9000 Series Hardware Installation Guides |
To provide technical feedback on this document, or to report an error or omission, please send your comments to nexus9k-docfeedback@cisco.com. We appreciate your feedback.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2025 Cisco Systems, Inc. All rights reserved.
[1] For N9K-C9348GC-FXP the PSU SPROM is not readable when the PSU is not connected. The model displays as "UNKNOWN" and status of the module displays as "shutdown.
[2] For specific fan speeds see the Overview Section of the Hardware Installation Guide.