Release Notes for Crosswork Network Controller, Release 7.0.5
Available Languages
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
Feedback
Cisco Crosswork Network Controller, Release 7.0.5
Cisco Crosswork Network Controller, Release 7.0.5
The Cisco Crosswork Network Controller 7.0.5 release notes list the resolved issues included in this patch and provide instructions for installing it. For installation steps, see Crosswork Network Controller Release 7.0.5 Patch Installation Workflow.
The recommended upgrade path to Crosswork Network Controller version 7.0.5 from version 7.0.4. If you have additional questions not addressed in this document, contact Cisco Customer Experience.
There are no new features in this release.
The tables below outline the resolved issues in Crosswork Network Controller version 7.0.5. For more details, click the bug ID to access the Cisco Bug Search Tool.
Refer to the Cisco bug search tool section for instructions on how to use the tool.
Table 1. Resolved issues for Platform Infrastructure
| Bug ID |
Description |
| Certificate renewal fails in IPv6 and dual-stack deployments because the renewal script cannot parse IPv6 addresses. |
|
| When robot-orch restarts after a failed patch upgrade, it incorrectly attempts to upgrade the already-installed patch version instead of retrying the failed upgrade. |
Table 2. Resolved issues in Element Management Functions
| Bug ID |
Description |
| Changes in the optics port operational state caused by a fiber cut are not reflected correctly in Crosswork Network Controller. |
Consider the following important information before using Crosswork Network Controller 7.0.5:
NSO keepalive configuration required for stable RESTCONF integration
Previous CNC interactions with NSO's service-state-changes RESTCONF API caused "hanging" sessions that exhausted NSO's session limits, rendering it unresponsive. To prevent this and ensure stable RESTCONF integration, configure NSO keepalive settings in the ncs.conf file for all deployments, including Standalone NSO and NSO LSA. This configuration enables NSO to detect closed client connections and clean up inactive sessions. For details on configuring these settings, refer to the Install the Cisco NSO function packs section in Crosswork Network Controller Release 7.0.5 Patch Installation Workflow.
For instructions on installing the Crosswork Network Controller 7.0.5 patch, see Crosswork Network Controller Release 7.0.5 Patch Installation Workflow.
You can use the Cisco Bug Search Tool to find detailed information about bugs in this release as well as in other releases.
1. Go to the Cisco Bug Search Tool.
2. Enter your registered Cisco.com username and password and click Log In. The Bug Search page opens.
Note: If you do not have a Cisco.com username and password, you can register here.
3. From the Product drop-down list, select Series/Model and enter Cloud and Systems Management in the search field.
4. Click Select from List and select Cloud and Systems Management > Routing and Switching Management > Cisco Crosswork Network Automation.
5. From the Release drop-down list, choose the appropriate filter as, Affecting or Fixed in Releases, Affecting Releases, or Fixed in Releases and enter the release version (for example, 7.0.5) in the search field.
6. (Optional) You can enter additional criteria (such as bug ID, problem description, a feature, or a product name) in the search field.
7. Click Search. When the search results are displayed, use the filter tools to narrow the results. You can filter the bugs by status, severity, and so on.
8. To export the results to a spreadsheet, click Export Results to Excel.
Accessibility features
For a list of accessibility features in Cisco Crosswork Network Controller, visit VPAT Documents or contact accessibility@cisco.com.
All product documents except for some images, graphics, and charts are accessible. If you would like to receive the product documentation in audio format, braille, or large print, contact accessibility@cisco.com.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2025 Cisco Systems, Inc. All rights reserved.