Configure switch temperature alarms to monitor and manage temperature thresholds for network switches.
Follow this procedure to configure temperature alarms for a network switch to ensure effective monitoring of temperature thresholds.
Procedure
| 1. | Use the configure terminal command to enter global configuration mode. Example: |
|
| 2. | Use the alarm facility temperature { primary | secondary } high threshold command to set the high temperature threshold. Example:You can specify a threshold value between -40°F (–40°C) and 204.8°F (96°C). |
|
| 3. | Use the alarm facility temperature { primary | secondary } low threshold command to set the low temperature threshold. Example:You can specify a threshold value between -40°F (–40°C) and 204.8°F (96°C).. |
|
| 4. | Use the end command command to exit to privileged EXEC mode. Example: |
|
| 5. | Use the show alarm settings command to verify the switch tempearature alarms configuration on your switch. Example: |