Support
Product Support
Switches
Cisco Catalyst IE9300 Rugged Series
Configuration Guides

Alarms Configuration Guide, Cisco Catalyst IE9300 Rugged Series Switches

View all Saved Content

PDF

Is this content helpful?

Helpful Unhelpful

Suggestions for Improvement

Thank you for your feedback. Your response has been recorded.

Ask about this content

Alarms Configuration Guide, Cisco Catalyst IE9300 Rugged Series Switches

Expand all sections

About this content

Switch Alarms

Supported switch alarms
Global status monitoring alarms
Port status monitoring alarms
External alarm pins

How to Configure Switch Alarms

Configure the power supply alarms
Configure the switch temperature alarms
Associate the temperature alarms with the relay
FCS bit error rate threshold
FCS error hysteresis thresholds
Alarm profiles
Enable SNMP traps
Configure external alarms

Configuration Examples for Switch Alarms

Configure external alarms
Configure temperature alarms to a relay
Configure dual power supplies
Configuration example for display alarm settings
Monitoring and maintaining alarms status of switches

Alarms Configuration Guide, Cisco Catalyst IE9300 Rugged Series Switches

About this content

Updated: June 16, 2026

Provides an overview of alarms configuration for Cisco Catalyst IE9300 Rugged Series Switches.

Switch Alarms

Details the various alarm types and monitoring capabilities available for network switches within the Catalyst Center platform.

How to Configure Switch Alarms

Guides the configuration of various switch alarm types including power supply, temperature, and external alarms, along with error thresholds and SNMP trap settings.

Configuration Examples for Switch Alarms

Provides practical configuration examples for implementing external alarms, temperature monitoring, power supply redundancy, and alarm display settings on network switches.

Need help?

Open a support case

(Requires a Cisco Service Contract)

Bias-free language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.