Technical Specifications

Technical Specifications

Table 1. Physical Configurations

Physical Specifications

IE-3100H-6FT2T-E

IE-3100H-8T-E

Dimensions (H x W x D)

7.90 x 2.71 x 2.10 in

20.07 x 6.88 x 5.33 cm

7.90 x 2.71 x 2.10 in

20.07 x 6.88 x 5.33 cm

Weight (including the supplied dust caps installed)

0.754 Kg

0.738 Kg

Mounting

Wall

Wall

Environmental Ranges

Storage temperature

–40 to 85°C (–40 to 185°F)

Operating temperature

(measured inside enclosure, 1 inch below the bottom surface of the switch)

–40 to 75°C (–40 to 167°F)

Caution

 

Operating temperatures exceeding 60°C are not covered by the product safety certifications and approvals.

  • Fan Cooled Enclosure Operating: -40°C to +75°C (-40°F to 167°F)

  • Vented Enclosure Operating: -40°C to +70°C (-40°F to 158°F) with minimum 40 lfm on unit

  • Sealed Enclosure Operating: -40°C to +60°C (-40°F to 140°F)

  • Short Term Operating: +85°C (185°F) for 16 hours

Operating humidity

5 to 95% (non condensing)

Ingress Protection/Type Ratings

IP66 and IP67 Rated for protection against dust and submersion in water.

NEMA Type 4

Caution

 
IP66 and IP67, NEMA Type 4 compliant only when all IP67 cables are mated and torqued appropriately or with the supplied dust caps attached.

Operating altitude

Up to 15,000 feet (4572 meters) with no derating; Up to 40,000 feet (12,192 meters) derated to 25°C ambient

Storage altitude

Up to 40,000 feet (12192 meters)

Table 2. Power Specifications

Power Specifications

IE-3100H-6FT2T-E

IE-3100H-8T-E

Marked Input voltage range

12 to 48 VDC

12 to 48 VDC

Input voltage range (Absolute)

9.6 to 60VDC

9.6 to 60VDC

Marked Input current rating

1.5 A

1.5 A

Input current @ (9.6V / 60V)

0.998 A/0.174 A

1.265 A/ 0.210 A

Power consumption @ (9.6V / 60V)

9.58 W / 10.44 W

12.14 W/ 12.60 W

Connectors and Cabling

Table 3. Cisco Catalyst IE3100H Heavy Duty Series Switches Cables and Connectors

Data Ports

  • Copper 100 Base-T M12 D coded 4 pole (pin) cable: M12 Male and/or M12/RJ-45 connector

  • Copper GE M12 X coded 8 pole (pin) shielded cable: M12 Male and/or M12/RJ-45 connector

Power Input

M12 L-code female plug

Console Cable:

Console Cable with RS-232 with A-code M12 connector

CAB-CONSOLE-M12=

Torque Specifications

Table 4. Cisco Catalyst IE3100H Heavy Duty Series Switch Torque Specs

Console, Ethernet ports (M12 Connectors)

4.43 to 7.08 in-lbs (0.5 to 0.8 Nm)

M12 Connector Dust Cap (Console, Ethernet ports)

4.5 to 5.5 in-lbs (0.51 to 0.62 Nm)

Power Supply Connector (M12 L-code)

5.3 in-lbs (0.60 Nm)

SD Card Access Door Captive Screws

4.43 to 7.08 in-lbs (0.5 to 0.8 Nm)