Provides show commands to verify the configuration and status of G.8032 Ethernet Ring Protection.
Use the show commands given here to verify the configuration and status of G.8032 Ethernet ring protection.
show ethernet ring g8032 status
The show ethernet ring g8032 status [ring-name][instance [instance-id]] command displays the status information of an Ethernet Ring configured using the G.8032 standard.
Device# show ethernet ring g8032 status
Ethernet ring g8032_ring instance 1 is RPL Owner node in Idle State
Port0: GigabitEthernet1/3
APS-Channel: GigabitEthernet1/3
Status: RPL, blocked
Remote R-APS NodeId: 0000.0000.0000, BPR: 0
Port1: GigabitEthernet1/4
APS-Channel: GigabitEthernet1/4
Status: Non-RPL
Remote R-APS NodeId: 0000.0000.0000, BPR: 0
APS Level: 7
Profile: g8032_profile
WTR interval: 1 minutes
Guard interval: 10 milliseconds
HoldOffTimer: 0 seconds
Revertive mode
Device# show ethernet ring g8032 status g8032_ring
Ethernet ring g8032_ring instance 1 is RPL Owner node in Idle State
Port0: GigabitEthernet1/3
APS-Channel: GigabitEthernet1/3
Status: RPL, blocked
Remote R-APS NodeId: 0000.0000.0000, BPR: 0
Port1: GigabitEthernet1/4
APS-Channel: GigabitEthernet1/4
Status: Non-RPL
Remote R-APS NodeId: 0000.0000.0000, BPR: 0
APS Level: 7
Profile: g8032_profile
WTR interval: 1 minutes
Guard interval: 10 milliseconds
HoldOffTimer: 0 seconds
Revertive mode
Device# show ethernet ring g8032 status g8032_ring instance 1
Ethernet ring g8032_ring instance 1 is RPL Owner node in Idle State
Port0: GigabitEthernet1/3
APS-Channel: GigabitEthernet1/3
Status: RPL, blocked
Remote R-APS NodeId: 0000.0000.0000, BPR: 0
Port1: GigabitEthernet1/4
APS-Channel: GigabitEthernet1/4
Status: Non-RPL
Remote R-APS NodeId: 0000.0000.0000, BPR: 0
APS Level: 7
Profile: g8032_profile
WTR interval: 1 minutes
Guard interval: 10 milliseconds
HoldOffTimer: 0 seconds
Revertive mode
show ethernet ring g8032 summary
This command displays a summary of the G.8032 Ethernet Ring, providing a high-level overview of its operational state, status, and key metrics.
Device# show ethernet ring g8032 summary
Chassis Node Id: f839.18ab.56a0
States
-----------------------------
Init 0
Idle 1
Protection 0
Manual Switch 0
Forced Switch 0
Pending 0
----------------------------
Total 1
show ethernet ring g8032 statistics
The show ethernet ring g8032 statistics [ring-name][instance [instance-id]] command displays detailed statistical information about the G.8032 Ethernet Ring, specifically focusing on performance metrics, packet counts, error rates, and other key data related to the operation of the Ethernet ring.
Device# show ethernet ring g8032 statistics
Statistics for Ethernet ring g8032_ring instance 1
Local SF detected:
Port0: 1
Port1: 1
FOP PM detected:
Port0: 0
Port1: 0
R-APS Port0(Tx/Rx) Port1(Tx/Rx)
Last Tx time Last Tx time
Last Rx time Last Rx time
--------------------------------------------------------------------------------
NR : 14/0 14/0
Tue Feb 11 14:52:13.366 Tue Feb 11 14:52:13.366
Never Never
NR,RB : 78/0 78/0
Tue Feb 11 14:58:33.366 Tue Feb 11 14:58:33.366
Never Never
SF : 3/0 3/0
Tue Feb 11 14:51:17.814 Tue Feb 11 14:51:17.814
Never Never
MS : 0/0 0/0
Never Never
Never Never
FS : 0/0 0/0
Never Never
Never Never
EVENT : 0/0 0/0
Never Never
Never Never
State Last entry into state time
--------------------------------------------------------------------------------
Init : Tue Feb 11 14:51:13.322
Idle : Tue Feb 11 14:52:18.366
Protection : Tue Feb 11 14:51:13.370
Manual Switch : Never
Forced Switch : Never
Pending : Tue Feb 11 14:51:18.364
show ethernet ring g8032 brief
The show ethernet ring g8032 brief [ring-name][instance [instance-id]] command displays a brief summary of the G.8032 Ethernet Ring status. This command is typically used for a quick overview of the ring's operational status and basic information.
Device# show ethernet ring g8032 brief
R: Interface is the RPL-link
F: Interface is faulty
B: Interface is blocked
FS: Local forced switch
MS: Local manual switch
RingName Inst NodeType NodeState Port0 Port1
--------------------------------------------------------------------------------
g8032_ring 1 Owner Idle R,B
show ethernet ring g8032 profile
The show ethernet ring g8032 profile profile command displays the profile settings for the G.8032 Ethernet Ring. This profile includes configuration details such as the ring's operational parameters, settings for fault recovery, member devices, and other critical settings that govern how the Ethernet ring operates.
Device# show ethernet ring g8032 profile
Ethernet ring profile name: g8032_profile
WTR interval: 1 minutes
Guard interval: 10 milliseconds
HoldOffTimer: 0 seconds
Revertive mode
show ethernet ring g8032 port status
The show ethernet ring g8032 port status command displays the status of the interface ports on a G.8032 Ethernet Ring.
Device# show ethernet ring g8032 port status
Port: GigabitEthernet1/3
Ring: my_ring
Block vlan list: 1-110,112-4095
Unblock vlan list: 111
REQ/ACK: 0/0
Instance 1 is in Blocked Data state
Port: GigabitEthernet1/4
Ring: my_ring
Block vlan list: 1-110,201-4095
Unblock vlan list: 111-200
REQ/ACK: 0/0
Instance 1 is in Unblocked state
show ethernet ring g8032 port status interface
The show ethernet ring g8032 port status interface type number command displays the status of the interface ports on a G.8032 Ethernet Ring, showing specific information about the operational state and performance of the ports participating in the Ethernet ring.
Device# show ethernet ring g8032 port status interface GigabitEthernet1/3
Port: GigabitEthernet1/3
Ring: g8032_ring
Block vlan list: 1-9,11-4095
Unblock vlan list: 10
REQ/ACK: 0/0
Instance 1 is in Blocked state