The web configuration utility is a Graphical User Interface (GUI) that gives an administrator access to a tool that is easy and contains all the possible features that can be changed to modify the performance of a device.
The objective of this document is to explain how to log in and access the web configuration utility of the WRVS4400N Wireless Gigabit Security router.
• WRVS4400N Wireless-N Gigabit Security Router
• v2.0.1.3
Step 1. Open a web browser (such as Internet Explorer, Firefox, or Safari), enter the IP address of the router in the address bar, and press enter.
Note: The default IP address of the WRVS4400N is 192.168.1.1 and the default username and password are "admin". If you forgot the IP address, username or password of the router, you can press and hold the Reset button on the back of the router for 30 seconds. However, this procedure resets the router to factory defaults, and any settings on the router are erased.
Step 2. In the Security dialog box, enter the username and password, and click OK.
The web configuration utility page opens: