Verify Webex Engage Version
Available Languages
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
FeedbackIntroduction
This document describes few simple steps to check the Webex Engage version on Webex Contact Center (WxCC) to track releases that are linked to Webex Engage defect deployments or enhancements.
Prerequisites
Requirements
Cisco recommends that you have skills and knowledge of Webex Contact Center (WxCC) solution , Webex Connect and Webex Engage
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.
How to check Webex Engage version
Link to use: https://<engage-domain-name>/version.aspx
Example: Access the New digital channel tab to check the engage-domain-name and add version.aspx at the end
https://webexccwithwxcaspb.imi.chat/version.aspx
Verify
Revision History
| Revision | Publish Date | Comments |
|---|---|---|
1.0 |
03-Feb-2025 |
Initial Release |