The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL15309
Cisco announces the end-of-sale and end-of-life dates for the Cisco Expressway CE1300 Appliance. The last day to order the affected product(s) is September 29, 2025. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
The CE1300 is the last non-virtualized ("bare metal" hardware) appliance model. Replacement CE1400V requires virtualization software and license (not included, must be customer-provided). Please see Cisco Expressway technical documentation on cisco.com for more details.
Table 1. End-of-life milestones and dates for the Cisco Expressway CE1300 Appliance
Milestone |
Definition |
Date |
End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
June 30, 2025 |
End-of-Sale Date: |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
September 29, 2025 |
Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
December 28, 2025 |
End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
September 29, 2026 |
End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
September 29, 2026 |
End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
December 25, 2029 |
Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
September 30, 2030 |
Table 2. Product part numbers affected by this announcement
End-of-Sale Product Part Number |
Product Description |
Replacement Product Part Number |
Replacement Product Description |
Additional Information |
EXPWY-1300-K9 |
Cisco Expressway Series Multi-purpose 1300 Appliance |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXPWY-1300-K9= |
Cisco Expressway Series Multi-purpose 1300 Appliance |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-CPU-I6334 |
Intel 6334 3.6GHz/165W 8C/18MB DDR4 3200MHz |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-MR-X16G1RW |
16GB RDIMM SRx4 3200 (8Gb) |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-RAID-220M6 |
Cisco 12G SAS RAID Controller w/4GB FBWC (16 Drv) w/1U Brkt |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-HD12T10NK9 |
1.2TB 12G SAS 10K RPM SFF HDD (SED) |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-M2-HWRAID |
Cisco Boot optimized M.2 Raid controller |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-M2-240G |
240GB SATA M.2 |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-PCIE-ID10GF |
Intel X710-DA2 dual-port 10G SFP+ NIC |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-PSU1-1050W |
Cisco UCS 1050W AC Power Supply for Rack Server Platinum |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-TPM-002C |
TPM 2.0, TCG, FIPS140-2, CC EAL4+ Certified, for M6 servers |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-PSU1-1200W |
1200W Titanium power supply for C-Series Servers |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-1GSFP-T |
1 Gigabit Ethernet SFP Module 10/100/1000BASE-T |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-10GSFP-SR-MP |
10 Gigabit Ethernet SFP Module 10GBASE-SR SFP+ SR Optics |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-1GSFP-T= |
Spare 1 Gigabit Ethernet SFP Module 10/100/1000BASE-T |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
EXP-10GSFP-SR-MP= |
10 Gigabit Ethernet SFP Module 10GBASE-SR SFP+ SR Optics |
See the Product Migration Options section below for detailed information on replacing this product. |
- |
- |
Customers may migrate to the CE1400V-M7-K9 appliance, which requires virtualization software and license (not included, must be customer-provided). Customers may also migrate to other virtualized hardware. Please see Cisco Expressway technical documentation on cisco.com for more details.
The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/c/en/us/about/takeback-and-reuse/product-recycling.html.
For more information about the Cisco End-of-Life Policy, go to: https://www.cisco.com/c/en/us/products/eos-eol-policy.html.
For more information about the Cisco Product Warranties, go to: https://www.cisco.com/c/en/us/products/warranty-listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: https://cway.cisco.com/mynotifications.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.