The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL15868
Cisco announces the end-of-sale and end-of-life dates for the Cisco Cyber Vision Center on UCS M6 series appliance. The last day to order the affected product(s) is June 18, 2026. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-life milestones and dates for the Cisco Cyber Vision Center on UCS M6 series appliance
| Milestone |
Definition |
Date |
| End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
March 27, 2026 |
| End-of-Sale Date: |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
June 18, 2026 |
| Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
September 16, 2026 |
| End of SW Maintenance Releases Date: |
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. |
June 18, 2027 |
| End of Vulnerability/Security Support: |
The last date that Cisco Engineering may release a planned maintenance release or scheduled software remedy for a security vulnerability issue. |
June 30, 2031 |
| End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
June 18, 2027 |
| End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
June 18, 2027 |
| End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
September 30, 2027 |
| End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
September 13, 2030 |
| Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
June 30, 2028 |
| Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
June 30, 2031 |
Table 2. Product part numbers affected by this announcement
| End-of-Sale Product Part Number |
Product Description |
Migration Product Part Number |
Migration Product Description |
Additional Information |
| CV-CNTR-M6N= |
Cyber Vision Center Appliance M6N Spare |
CV-CNTR-M8N= |
Cyber Vision Center Appliance M8N |
- |
| CV-CNTR-M6N |
Cyber Vision Center Appliance M6N |
CV-CNTR-M8N |
Cyber Vision Center Appliance M8N |
- |
| CV-CNTR-M6N-SW |
Cyber Vision Center M6N Software |
CV-CNTR-M8N-SW |
Cyber Vision Center M8N Software |
- |
| CV-CPU-A7443P |
AMD 2.85GHz 7443P 200W 24C/128MB Cache DDR4 3200MHz |
CV-CPU-A9355P |
AMD 9355P 3.55GHz 280W 32C/256MB Cache DDR5 6000MT/s |
- |
| CV-MR-X16G1RW |
16GB RDIMM SRx4 3200 (8Gb) for Cyber Vision Center |
CV-MRX16G1RE5 |
16GB DDR5-6400 RDIMM 1Rx8 (16Gb) for Cyber Vision Center |
- |
| CV-PSU1-1050W |
Cyber Vision Cisco UCS 1050W AC Power Supply for Rack Server |
CV-PSU1-1200W-D |
1200w AC Titanium Power Supply for Cisco Cyber Vision Center |
- |
| CV-TPM2-002B-C |
Trusted Platform Module2.0 UCS servers (FIPS 140-2 Compliant) |
CV-TPM2-002D-D |
TPM 2.0 FIPS 140-2 MSW2022 compliant AMD M8 servers |
- |
| CV-BBLKD-S2 |
Cyber Vision Center UCS C-Series M5 SFF drive blanking panel |
CV-BBLKD-M8 |
UCS C-Series M6 & M8 SFF drive blanking panel for CV Center |
- |
| CV-NVME4-1600 |
1.6TB 2.5in U.2 15mm P5620 Hg Perf Hg End NVMe (3X) |
CV-NVB1T6M2P |
1.6TB 2.5in U.3 15mm Micron 7500 Hg Perf Hg End 3X NVMe |
- |
| CV-NVMEG4-M1600 |
1.6TB 2.5in U.3 15mm P7450 Hg Perf Hg End NVMe (3X) |
CV-NVB1T6M2P |
1.6TB 2.5in U.3 15mm Micron 7500 Hg Perf Hg End 3X NVMe |
- |
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at https://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the Cisco Cyber Vision Center on UCS M6 series appliance through the Cisco Refresh (certified remanufactured) program. Remanufactured units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Refresh program, go to: https://www.cisco.com/c/en/us/products/remanufactured.html.
The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/c/en/us/about/takeback-and-reuse/product-recycling.html.
For more information about the Cisco End-of-Life Policy, go to:
https://www.cisco.com/c/en/us/products/eos-eol-policy.html.
For more information about the Cisco Product Warranties, go to: https://www.cisco.com/c/en/us/products/warranty-listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: https://cway.cisco.com/mynotifications.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.