Table Of Contents
Reviewing User Reports Results
Bill Summary Report Results
Bill Detail Report Results
Top N By Charge or Duration Report Results
Top N By Number of Calls Report Results
Call Usage for Assistant—Detail Report Results
Call Usage for Assistant—Summary Report Results
Call Usage for Manager—Detail Report Results
Call Usage for Manager—Summary Report Results
Cisco IP Phone Services Report Results
Related Topics
Additional Cisco Documentation
Reviewing User Reports Results
This chapter describes report output information for each CAR user report. The chapter contains the following topics:
•
Bill Summary Report Results
•
Bill Detail Report Results
•
Top N By Charge or Duration Report Results
•
Top N By Number of Calls Report Results
•
Call Usage for Assistant—Detail Report Results
•
Call Usage for Assistant—Summary Report Results
•
Call Usage for Manager—Detail Report Results
•
Call Usage for Manager—Summary Report Results
•
Cisco IP Phone Services Report Results
•
Related Topics
•
Additional Cisco Documentation
Bill Summary Report Results
The report combines information in groups by the user name in ascending order. The summary report includes the following fields (see Table 8-1).
Table 8-1 Summary Report Fields
Field
|
Description
|
Call Classification—Call categories specify classes.
|
On Net
|
Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, be aware that any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See "Configuring the Dial Plan" section on page 29-2.
|
Internal
|
Calls, including intracluster calls, that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used).
|
Local
|
Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes.
|
Long Distance
|
Long-distance calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN.
|
International
|
International calls that originate in the Cisco Unified Communications Manager network and go out through the PSTN.
|
Others
|
All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
|
QOS
|
The number of calls for each Quality of Service category. Parameters that the CAR administrator sets provide the basis for the following QoS categories:
• Good—QoS for these calls designates the highest possible quality.
• Acceptable—QoS for these calls shows them slightly degraded but still within an acceptable range.
• Fair—QoS for these calls, that although degraded, still fall within a usable range.
• Poor—QoS for these calls get categorized as unsatisfactory.
• NA—These calls do not match any criteria for the established QoS categories.
See the "Configuring QoS Values" section on page 35-1 and the "Configuring QoS by Gateway Reports" section on page 10-6.
|
Calls
|
Indicates the number of calls for each call classification.
|
Charge
|
Indicates the charge that is associated with each call. Call charge information that the CAR administrator provides for the CAR rating engine provides basis for charges. See Chapter 34, "Configuring the CAR Rating Engine".
|
Figure 8-1 and Figure 8-2 display sample output from the Individual Bill and Department Bill Summary reports.
Figure 8-1 Individual Bill Summary Report Sample
Figure 8-2 Department Bill Summary Report Sample
Bill Detail Report Results
The report places information in groups by the user name in ascending order. The detail report includes the following fields (see Table 8-2).
Table 8-2 Detail Report Fields
Field
|
Description
|
Date
|
The date that the call originated.
|
Orig. Time
|
The time that the call originated.
|
Orig.
|
The originating number from which the call was placed.
|
Dest.
|
The destination number to which the call was directed.
|
Call Classification—Call categories specify classes.
|
On Net
|
Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, be aware that any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See "Configuring the Dial Plan" section on page 29-2.
|
Internal
|
Calls, including intracluster calls, that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used).
|
Local
|
Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes.
|
Long Distance
|
Long-distance calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN.
|
International
|
International calls that originate in the Cisco Unified Communications Manager network and go out through the PSTN.
|
Others
|
All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
|
QOS
|
The number of calls for each Quality of Service category. Parameters that the CAR administrator sets provide the basis for the following QoS categories:
• Good—QoS for these calls designates the highest possible quality.
• Acceptable—QoS for these calls shows them slightly degraded but still within an acceptable range.
• Fair—QoS for these calls, that although degraded, still fall within a usable range.
• Poor—QoS for these calls get categorized as unsatisfactory.
• NA—These calls do not match any criteria for the established QoS categories.
See the "Configuring QoS Values" section on page 35-1 and the "Configuring QoS by Gateway Reports" section on page 10-6.
|
Duration(s)
|
The time, in seconds, that the call remains connected.
|
Charge
|
The charge that is associated with each call. Call charge information that the CAR administrator provided for the CAR rating engine provides the basis for charges. See the "Configuring QoS Values" section on page 35-1.
|
Figure 8-3 and Figure 8-4 display sample output from the Individual Bill and Department Bill Detail reports.
Figure 8-3 Individual Bill Detail Sample Report
Figure 8-4 Department Bill Detail Sample Report
Top N By Charge or Duration Report Results
The fields for the Top N by Charge and the Top N by Duration vary depending on the report type. The reports show only outgoing calls. See Table 8-3.
Table 8-3 Top N by Charge and by Duration Report Fields
Field
|
Description
|
By Individual Users
|
User
|
User names.
|
Calls
|
Total number of calls.
|
Duration(s)
|
The time, in seconds, that the call was connected.
|
Charge
|
The charge that is associated with each call. Call charge information that the CAR administrator provided for the CAR rating engine provides basis for charges. See the "Configuring QoS Values" section on page 35-1.
|
By Destinations
|
Dest
|
The destination of the calls.
|
Call Classification
|
The total number of calls for each call classification.
|
Calls
|
Total number of calls.
|
Duration
|
The time, in seconds, that the call was connected.
|
Charge
|
The charge that is associated with each call. Call charge information that the CAR administrator provided for the CAR rating engine provides basis for charges. See Chapter 34, "Configuring the CAR Rating Engine".
|
By Number of Calls
|
User
|
User names.
|
Date
|
Date that the call occurred.
|
Orig Time
|
Time that the call originated.
|
Orig
|
Origin of the call.
|
Dest
|
Destination of the call.
|
Call Classification
|
The total number of calls for each call classification.
|
Duration
|
The time, in seconds, that the call was connected.
|
Charge
|
The charge that is associated with each call. Call charge information that the CAR administrator provided for the CAR rating engine provides basis for charges. See Chapter 34, "Configuring the CAR Rating Engine".
|
Figure 8-5 and Figure 8-6 display sample reports.
Figure 8-5 Top N Charge by Destinations Sample Report
Figure 8-6 Top N Duration by Destinations Sample Report
Top N By Number of Calls Report Results
The fields for the Top N by Number of Calls report vary depending on the report type. The report shows both incoming and outgoing calls. See Table 8-4.
Table 8-4 Top N by Number of Calls Report Fields
Field
|
Description
|
By Individual Users
|
Users
|
User names.
|
Charge
|
The total amount of billing charges for all calls to that user. Call charge information that the CAR administrator provided for the CAR rating engine provides basis for charges. See Chapter 34, "Configuring the CAR Rating Engine".
|
Duration(s)
|
The time, in seconds, that the call connected.
|
Calls Made
|
The total number of calls that the user placed.
|
Calls Received
|
The total number of calls that the user received.
|
Total Calls
|
The total number of incoming and outgoing calls.
|
By Extensions
|
Extension No
|
The extension that originated/placed and received the call.
|
Charge
|
The total amount of billing charges for all calls to that user. Call charge information that the CAR administrator provided for the CAR rating engine provides basis for charges. See Chapter 34, "Configuring the CAR Rating Engine".
|
Duration
|
The time, in seconds, that the call was connected.
|
Calls Made
|
The total number of calls that the user placed.
|
Calls Received
|
The total number of calls that the user received.
|
Total Calls
|
The total number of incoming and outgoing calls.
|
Figure 8-7 displays sample report output of Top N by Number of Calls by Individual Users in PDF format.
Figure 8-7 Top N by Number of Calls Report Sample Output
Call Usage for Assistant—Detail Report Results
The report, which supports Cisco Unified Communications Manager Assistant, shows the number of calls that assistants handled for themselves, that the assistant handled for each manager, and the total number of calls that the assistant handled. The report places information in groups about calls that the assistant handled and calls that the assistant handled for the manager. The detail report includes the following fields (see Table 8-5).
Table 8-5 Detail Report Fields
Field
|
Description
|
Date
|
The date that the call originated.
|
Orig. Time
|
The time that the call originated.
|
Orig.
|
The originating number from which the call was placed.
|
Dest.
|
The destination number to which the call was directed.
|
Call Classification
|
The type of call (internal, incoming, and so on.)
|
Duration (sec)
|
The time, in seconds, that the call connected.
|
Figure 8-8 displays sample output from a Call Usage for Assistant Detail report in PDF format.
Figure 8-8 Call Usage for Assistant Detail Report
Call Usage for Assistant—Summary Report Results
The report, which supports Cisco Unified Communications Manager Assistant, shows information about calls that the assistant handled for themselves and that the assistant handled for the manager. The reports place call information by groups by attendant name. The summary report includes the following fields (see Table 8-6).
Table 8-6 Summary Report Fields
Field
|
Description
|
Assistant-Extn/Manager
|
Shows the assistant name and directory number. If the assistant handles a call for a manager, the manager name displays.
|
Call Classification—Call categories specify classes.
|
Internal
|
Calls, including intracluster calls, that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used).
|
Local
|
Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes.
|
Long Distance
|
Long-distance calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN.
|
International
|
International calls that originate in the Cisco Unified Communications Manager network and go out through the PSTN.
|
Incoming
|
Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network.
|
On Net
|
Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, be aware that any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See "Configuring the Dial Plan" section on page 29-2.
|
Others
|
All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
|
Calls
|
The number of calls that the assistant handled or that the assistant handled for the manager.
|
Duration (sec)
|
The total duration for all the calls for the particular call classification.
|
Figure 8-9 displays sample output of the Call Usage for Assistant Summary report in PDF format.
Figure 8-9 Call Usage for Assistant Summary Report
Call Usage for Manager—Detail Report Results
The report, which supports Cisco Unified Communications Manager Assistant, provides information about calls that managers handle for themselves and that assistants handle for managers. The report places information in groups by the assistant name and shows the total number of calls that the manager handles and that the assistant handles for the manager. The detail report includes the following fields (see Table 8-7).
Table 8-7 Detail Report Fields
Field
|
Description
|
Date
|
The date that the call originates.
|
Orig. Time
|
The time that the call originates.
|
Orig.
|
The originating number from which the call is placed.
|
Dest.
|
The destination number to which the call is directed.
|
Call Classification
|
The type of call (internal, incoming, and so on.)
|
Duration (sec)
|
The time, in seconds, that the call connects.
|
Figure 8-10 displays sample output from the Call Usage for Manager Detail report.
Figure 8-10 Call Usage for Manager Detail Report
Call Usage for Manager—Summary Report Results
The report, which supports Cisco Unified Communications Manager Assistant, shows information about calls that the managers handle for themselves and that the assistants handle for the managers. The report places information in groups by the manager name and shows the total number of calls that are handled for each manager. The report includes the following fields (see Table 8-8).
Table 8-8 Summary Report Fields
Field
|
Description
|
Manager-Extn/Assistant
|
Shows the manager name and directory number. If the assistant handles a call for a manager, the assistant name displays.
|
Call Classification—Call categories specify classes.
|
Internal
|
Calls, including intracluster calls, that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used).
|
Local
|
Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes.
|
Long Distance
|
Long-distance calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN.
|
International
|
International calls that originate in the Cisco Unified Communications Manager network and go out through the PSTN.
|
Incoming
|
Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network.
|
On Net
|
Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, be aware that any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See "Configuring the Dial Plan" section on page 29-2.
|
Others
|
All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
|
Calls
|
The number of calls that the assistant or the manager handles.
|
Duration
|
The total duration for all the calls for the particular call classification.
|
Figure 8-11 displays sample output of the Call Usage for Manager Summary report in PDF format.
Figure 8-11 Call Usage for Manager Summary Report
Cisco IP Phone Services Report Results
The Cisco IP Phone Services report includes the following fields (see Table 8-9).
Table 8-9 Cisco Unified IP Phone Services Report Fields
Field
|
Description
|
Cisco IP Phone Services
|
The name of the selected service.
|
Number of Subscribers
|
The total number of subscribers for a given service.
|
% Subscription
|
The percentage of users who are subscribed to a given service, out of the total number of subscriptions for all services.
|
Figure 8-12 displays sample output from the Cisco IP Phone Services Report in PDF format.
Figure 8-12 Cisco IP Phone Services Report Sample Output
Related Topics
•
CDR Analysis and Reporting Configuration Checklist, page 2-1
•
Chapter 4, "Configuring Bills User Reports"
•
Chapter 5, "Configuring Top N User Reports"
•
Chapter 6, "Configuring Cisco Unified Communications Manager Assistant User Reports"
•
Chapter 7, "Configuring Cisco IP Phone Service User Reports"
Additional Cisco Documentation
•
Cisco Unified Communications Operating System Administration Guide
•
Cisco Unified Serviceability Administration Guide
•
Cisco Unified Communications Manager Call Detail Records Administration Guide