Table Of Contents

Accessing Dialed Number Analyzer

Logging On

Activating Dialed Number Analyzer Service

Starting/Stopping/Restarting Dialed Number Analyzer

Deactivating Dialed Number Analyzer

Related Topics

Accessing Dialed Number Analyzer

---

Dialed Number Analyzer gets installed as part of the Cisco Unified CallManager. Refer to Cisco Unified CallManager Administration Guide for more information.

Dialed Number Analyzer installs as a feature service on Cisco Unified CallManager. This chapter describes how to activate, deactivate, start, and stop the service and how to log in to Dialed Number Analyzer.

Use the following topics to access Dialed Number Analyzer and control the service:

•Logging On

•Activating Dialed Number Analyzer Service

•Starting/Stopping/Restarting Dialed Number Analyzer

•Deactivating Dialed Number Analyzer

Logging On

This section describes the procedure to log in to Dialed Number Analyzer from a remote server.

Procedure

---

Step 1 To access DNA, go to Cisco Unified CallManager Serviceability and choose Tools > Dial Number Analyzer.

You can also use the following URL:

https://<cm-machine>:8443/dna

where <cm-machine> specifies the node name or IP address on which Dialed Number Analyzer is installed.

The Enter Network Password dialog displays.

Step 2 In the User Name field, enter a valid user ID.

Use Unified CMAdministrator as the user ID.

Step 3 In the Password field, enter the password that corresponds to the Unified CMAdministrator login ID for that machine.

Step 4 Click OK.

Step 5 You are now logged in to Dialed Number Analyzer.

---

Additional Information

See the "Related Topics" section.

Activating Dialed Number Analyzer Service

After Dialed Number Analyzer installs as a service, it starts automatically. You can confirm that the service is started by checking the tool status.

You can activate and deactivate Dialed Number Analyzer service using Cisco Unified CallManager Serviceability after you access it by using the appropriate URL. Use the following procedure to activate the service.

Procedure

---

Step 1 Access Cisco Unified CallManager Serviceability.

Step 2 Choose Tools > Service Activation.

The Service Activation window displays.

Step 3 Select Cisco Dialed Number Analyzer from the Unified CMServices list and click Save.

---

Note If the service is already activated, the Activation Status will display as Activated.

---

Step 4 The service gets activated and the Activation Status column displays the status as Activated.

---

---

Note The DNA service starts automatically after it is activated. See the "Starting/Stopping/Restarting Dialed Number Analyzer" section to stop, start, or restart the service.

---

---

Note Every time that the service is started, Dialed Number Analyzer synchronizes with Cisco Unified CallManager database.

---

Additional Information

See the "Related Topics" section.

Starting/Stopping/Restarting Dialed Number Analyzer

The Dialed Number Analyzer service starts automatically after it is activated by using Cisco Unified CallManager Serviceability. This section describes the procedures to stop or restart the Dialed Number Analyzer service.

Procedure

---

Step 1 In Cisco Unified CallManager Serviceability, choose Tools > Control Center - Feature Services.

The Control Center-Feature Services window displays.

Step 2 Choose the Cisco Unified CallManager server from the Servers drop-down list box.

Dialed Number Analyzer displays in list under Service Name column, in the Unified CMServices.

---

Note If the Dialed Number Analyzer was activated by using "Activating Dialed Number Analyzer Service" section, the Status displays as Activated.

---

Step 3 Check the check box that corresponds to Dial Number Analyzer.

Step 4 If you want to restart the Dialed Number Analyzer service, click Restart.

The service restarts, and the message, Service Successfully Restarted, displays.

Step 5 If you want to stop the Dialed Number Analyzer service, click Stop.

The service stops, and the message, Service Successfully Stopped, displays.

Step 6 If you want to start a stopped Dialed Number Analyzer service, click Start.

The service starts, and the message, Service Successfully Started, displays.

---

Additional Information

See the "Related Topics" section.

Deactivating Dialed Number Analyzer

You can deactivate the Dialed Number Analyzer service when you do not require it. This section describes the procedure to deactivate the Dialed Number Analyzer service and log out of the tool.

Procedure

---

Step 1 In Cisco Unified CallManager Serviceability, choose Tools > Service Activation.

The Service Activation window displays.

Step 2 Choose the Cisco Unified CallManager server from the Servers drop-down list box.

Dialed Number Analyzer displays in list under Service Name column, in the Unified CMServices. The Status displays as Activated.

Step 3 Uncheck the check box that corresponds to the Dial Number Analyzer and click Save.

The service deactivates, and the Status column displays the status as Deactivated.

To exit from Dialed Number Analyzer, after the service is stopped, close the browser window.

---

Additional Information

See the "Related Topics" section.

Related Topics

•Logging On

•Activating Dialed Number Analyzer Service

•Starting/Stopping/Restarting Dialed Number Analyzer

•Deactivating Dialed Number Analyzer

Additional Cisco Documentation

•Installing Cisco Unified CallManager

•Cisco Unified CallManager System Guide

•Cisco Unified CallManager Administration Guide

•Cisco Unified CallManager Serviceability System Guide

•Cisco Unified CallManager Serviceability Administration Guide