Table Of Contents

LDAP Directory Configuration

LDAP Directory Configuration Settings

Related Topics

LDAP Directory Configuration

---

LDAP directory configuration takes place in these related windows:

•LDAP System Configuration

•LDAP Directory

•LDAP Authentication

•LDAP Filter Configuration

Use the following topics to configure LDAP directory information:

•LDAP Directory Configuration Settings

•Related Topics

LDAP Directory Configuration Settings

In Cisco Unified Communications Manager Administration, use the System > LDAP > LDAP Directory menu path to configure LDAP directories.

In the LDAP Directory window, you specify information about the LDAP directory; for example, the name of the LDAP directory, where the LDAP users exist, how often to synchronize the data, and so on.

Before You Begin

Before you can synchronize the LDAP directory, you must activate the Cisco DirSync service. For information about how to activate services, see the Cisco Unified Serviceability Administration Guide.

Changes to LDAP Directory information and LDAP Authentication settings are possible only if synchronization from the customer LDAP directory is enabled in the Cisco Unified Communications Manager Administration LDAP System Configuration window.

Using the GUI

For instructions on how to use the Cisco Unified Communications Manager Administration Graphical User Interface (GUI) to find, delete, configure, or copy records, see the "Navigating the Cisco Unified Communications Manager Administration Application" section and its subsections, which explain how to use the GUI and detail the functions of the buttons and icons.

Configuration Settings Table

Table 12-1 describes the LDAP directory configuration settings. For related procedures, see the "Related Topics" section.

Table 12-1 LDAP Directory Configuration Settings 

Field		Description
LDAP Directory Information
LDAP Configuration Name		Enter a unique name (up to 40 characters) for the LDAP directory.
LDAP Manager Distinguished Name		Enter the user ID (up to 128 characters) of the LDAP Manager, who is an administrative user that has access rights to the LDAP directory in question.
LDAP Password		Enter a password (up to 128 characters) for the LDAP Manager.
Confirm Password		Reenter the password that you provided in the LDAP Password field.
LDAP User Search Base		Enter the location (up to 256 characters) where all LDAP users exist. This location acts as a container or a directory. This information varies depending on customer setup.
LDAP Custom Filter		Select an LDAP custom filter from the drop-down list. The LDAP filter filters the results of LDAP searches. LDAP users that match the filter get imported into the Cisco Unified Communications Manager database, but LDAP users that do not match the filter do not get imported. The default value is <None>. This value applies a default LDAP filter that is specific to the LDAP server type. These are the default LDAP filters: •Microsoft Active Directory (AD): (&(objectclass=user)(!(objectclass=Computer))(!(UserAccountControl:1.2.840.113556.1.4.803:=2))) •iPlanet or Sun One LDAP Server: (objectclass=inetOrgPerson) •OpenLDAP: (objectclass=inetOrgPerson) •Microsoft Active Directory Application Mode (ADAM): (&(objectclass=user)(!(objectclass=Computer))(!(msDS-UserAccountDisabled=TRUE))) For more information about LDAP filters, see the "LDAP Custom Filter Configuration" section.
LDAP Directory Synchronization Schedule
Perform Sync Just Once		If you want to perform synchronization of the data in this LDAP directory with the data in the Cisco Unified Communications Manager database only once, check this check box.
Perform a Re-sync Every		If you want to perform synchronization of the data in this LDAP directory with the data in the Cisco Unified Communications Manager database at a regular interval, use these fields. In the left field, enter a number. In the drop-down list box, choose a value: •hours •days •weeks •months Cisco Unified Communications Manager can synchronize directory information every 6 hours, which is the minimum value allowed for this field. Note This field remains active only if you do not check the Perform Sync Just Once check box.
Next Re-sync Time (YYYY-MM-DD hh:mm)		Specify a time to perform the next synchronization of Cisco Unified Communications Manager directory data with this LDAP directory. Use a 24-hour clock to specify the time of day. For example, 1:00 pm equals 13:00.
User Fields To Be Synchronized
Cisco Unified Communications Manager User Fields	LDAP User Fields	Description
User ID	sAMAccountName or uid	For these fields, the Cisco Unified Communications Manager data in the field specified at left gets synchronized with the LDAP user data in the field specified at right.
Middle Name	(drop-down list box)	For these fields, the Cisco Unified Communications Manager data in the field specified at left gets synchronized with the LDAP user data in the field specified at right. For the LDAP User field, choose one of the following values: •middleName •initials
Manager ID	manager	For these fields, the Cisco Unified Communications Manager data in the field specified at left gets synchronized with the LDAP user data in the field specified at right.
Phone Number	(drop-down list box)	For these fields, the Cisco Unified Communications Manager data in the field specified at left gets synchronized with the LDAP user data in the field specified at right. For the LDAP User field, choose one of the following values: •telephoneNumber •ipPhone
First Name	givenName	For these fields, the Cisco Unified Communications Manager data in the field specified at left gets synchronized with the LDAP user data in the field specified at right.
Last Name	sn	For these fields, the Cisco Unified Communications Manager data in the field specified at left gets synchronized with the LDAP user data in the field specified at right.
Department	department or departmentnumber	For these fields, the Cisco Unified Communications Manager data in the field specified at left gets synchronized with the LDAP user data in the field specified at right.
Mail ID	(drop-down list box)	For these fields, the Cisco Unified Communications Manager data in the field specified at left gets synchronized with the LDAP user data in the field specified at right. For the LDAP User field, choose one of the following values: •mail •sAMAccountName •uid
LDAP Server Information
Host Name or IP Address for Server		Enter the host name or IP address of the server where the data for this LDAP directory resides.
LDAP Port		Enter the port number on which the corporate directory receives the LDAP requests. You can only access this field if LDAP authentication for end users is enabled. The default LDAP port for Microsoft Active Directory and for Netscape Directory specifies 389. The default LDAP port for Secured Sockets Layer (SSL) specifies 636. How your corporate directory is configured determines which port number to enter in this field. For example, before you configure the LDAP Port field, determine whether your LDAP server acts as a Global Catalog server and whether your configuration requires LDAP over SSL. Consider entering one of the following port numbers: LDAP Port For When the LDAP Server Is Not a Global Catalog Server •389—When SSL is not required. (This port number specifies the default that displays in the LDAP Port field.) •636—When SSL is required. (If you enter this port number, make sure that you check the Use SSL check box.) LDAP Port For When the LDAP Server Is a Global Catalog Server •3268—When SSL is not required. •3269—When SSL is required. (If you enter this port number, make sure that you check the Use SSL check box.) Tip Your configuration may require that you enter a different port number than the options that are listed in the preceding bullets. Before you configure the LDAP Port field, contact the administrator of your directory server to determine the correct port number to enter.
Use SSL		Check this check box to use Secured Sockets Layer (SSL) encryption for security purposes. Note If LDAP over SSL is required, the corporate directory SSL certificate must be loaded into Cisco Unified Communications Manager. The Cisco Unified Communications Operating System Administration Guide documents the certificate upload procedure in the Security chapter.
Add Another Redundant LDAP Server		Click this button to add another row for entry of information about an additional server.
Perform Full Sync		Click this button to perform a full directory sync. While the directory is synchronizing, the button name changes to Cancel Full Sync. You can click the Cancel Full Sync button to cancel the sync.

In addition to the user fields that appear in Cisco Unified Communications Manager Administration, the Microsoft Active Directory Application Mode user fields that are described in Table 12-2 also get synchronized.

Table 12-2 Additional Synchronized Microsoft Active Directory Application Mode User Fields 

Cisco Unified Communications Manager User Fields	LDAP User Fields
UniqueIdentifier	ObjectGUID
Pager	pager or pagertelephonenumber
Mobile	mobile or mobiletelephonenumber
Title	title
Homephone	homephone or hometelephonenumber
OCSPrimaryUserAddress	msRTCSIP-primaryuseraddress

Additional Information

See the "Related Topics" section.

Related Topics

•LDAP Directory Configuration

•LDAP Directory Configuration Settings

•Understanding the Directory, Cisco Unified Communications Manager System Guide

•LDAP System Configuration

•LDAP Authentication Configuration

•LDAP Custom Filter Configuration

•Application Users and End Users, Cisco Unified Communications Manager System Guide

•Application User Configuration

•End User Configuration