Overview
Explains the prerequisites for ULB deployment and summarizes key parameters, requirements, and reference information before deploying ULB on the SMI layer.
Before deploying ULB on the SMI layer:
-
Ensure that all the virtual network functions (VNFs) are deployed.
-
Run the SMI synchronization operation for the ULB Ops Center and Cloud Native Common Execution Environment (CN-CEE).
-
Ensure that the node labels are configured as per the recommended pod deployment layout.
-
Configure the external VIPs as per the ULB deployment requirement.
-
Enable Istio for pod-to-pod traffic load balancing.