Overview
Learn how to deploy and configure ULB through Ops Center. This procedure covers prerequisites, deployment steps, and configuration of ULB in an on-premise environment.
The installation process involves setting up the ULB on on-premise environment, configuring necessary components, and verifying the installation.
The ULB is deployed as CN application using the following image.
| Image |
Description |
|---|---|
| ulb.<release>.SPA.tgz |
The ULB software image that is used to on-board the software in your deployment environment. |
The ULB deployment and configuration procedure involves the following stages.
Procedure
| 1. | Deploy the ULB through the SMI Cluster Deployer. |
|
| 2. | Configure the settings or customizations through the ULB Ops Center. The Ops Center is based on the ConfD CLI. The ULB configuration includes the feature-specific configurations to provide highly efficient load balancing capabilities. |
ULB Ops center
Explains the ULB Ops center, summarizing its key parameters, requirements, and reference information. It covers the Ops Center as a system-level infrastructure providing deployment, configuration, and management functionality.
Prerequisites for ULB deployment
Explains the prerequisites for ULB deployment and summarizes key parameters, requirements, and reference information before deploying ULB on the SMI layer.
Deploy the ULB
Provides instructions for deploying ULB, including required steps and verification actions.
Access the ULB Ops center
Explains how to access the ULB Ops Center and summarizes key parameters, requirements, and reference information for connecting via SSH.