Cisco UCS X24g Trimode M1 Installation and Service Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: May 6, 2025

Technical Specifications

This chapter includes the following topics:

Front Mezzanine Specifications

Physical Specifications


Specification	Value
Height	1.76 inches (44.70 mm)
Width	11.28 inches (286.51 mm)
Depth	8.11inches (205.99 mm)
Weight	The weight depends on the components installed. Minimally configured front mezzanine weight: 2 lb (0.9 kg) Fully configured front mezzanine weight: 4.7 lb (2.13 kg)

Environmental Specifications

The Cisco UCS X24g M1 Front Mezzanine Module installs into a supported X210c M8 compute node. Therefore, the Front Mezzanine module itself inherits the environmental and power specifications from the compute node that is hosting the Front Mezzanine module.

For the Cisco UCS X210c M8 Compute Node, go to:https://www.cisco.com/content/dam/en/us/td/docs/unified_computing/ucs/x/hw/x210c-m8/install .

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)