The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
A - B - C - D - E - F - H - I - M - N - P - R - S
Index
A
air duct, installing 1air duct, removing 1alternate boot image, CIMC 1B
BIOS password, clearing 1BIOS recovery switch 1boot image, alternate 1C
cabling, NVMe C connector 1cabling, NVMe D connector 1CIMC, alternate boot image 1clear BIOS password 1clearing CMOS 1CMOS clearing 1CPUs, installing 1CPUs, removing 1D
drive (SAS/SATA), reseating 1drive cabling, NVMe drives (24 SFF model 1dual storage controllers, installing 1dual storage controllers, removing 1E
erase firmware 1F
fan tray, installing 1fan tray, removing 1firmware, secure erase 1H
heatsinks, installing 1heatsinks, removing 1I
installing CPUs 1installing heatsinks 1installing, air duct 1installing, fan tray 1installing, storage controller 1installing, storage controllers 1M
mid-mount drives, replacing 1N
NVMe connectors, C and D 1P
password (BIOS), clearing 1PCB assembly (PCBA), recycling 1R
recycling, PCBA 1removing CPUs 1removing heatsinks 1removing, air duct 1removing, dual storage controllers 1removing, fan tray 1removing, storage controller 1replacing mid-mount drives 1reseating drives, SAS/SATA 1S
SAS/SATA drive, reseating 1storage controller, installing 1storage controller, removing 1switch, BIOS recovery 1