Defining GVRP Settings

To define GVRP settings for an interface:

1. Click VLAN Management > GVRP Settings.
2. Select GVRP Global Status to enable GVRP globally.
3. Click Apply to set the global GVRP status.
4. Select an interface type (Port or LAG), and click Go to display all interfaces of that type.
5. To define GVRP settings for a port, select it, and click Edit.
6. Enter the values for the following fields:
• Interface—Select the interface (Port or LAG) to be edited.
• GVRP State—Select to enable GVRP on this interface.
• Dynamic VLAN Creation—Select to enable Dynamic VLAN Creation on this interface.
• GVRP Registration—Select to enable VLAN Registration using GVRP on this interface.
7. Click Apply. GVRP settings are modified, and written to the Running Configuration file.