Overview
Provides sample outputs of PoE status.
This is a sample example of show power inline upoe-plus command.
Device# show power inline upoe-plus
Module Available Used Remaining
(Watts) (Watts) (Watts)
------ --------- -------- ---------
3 1310.0 660.0 650.0
Codes: DS - Dual Signature device, SS - Single Signature device
SP - Single Pairset device
Interface Admin Type Oper-State Power(Watts) Class Device Name
State Alt-A,B Allocated Utilized Alt-A,B
----------- ------ ---- ------------- --------- --------- ------- -----------
Te3/0/1 auto DS on,on 60.0 6.8 3,3 Ieee PD
Te3/0/2 auto DS on,on 60.0 6.7 3,3 Ieee PD
Te3/0/3 auto DS on,on 60.0 6.8 3,3 Ieee PD
Te3/0/4 auto DS on,on 60.0 6.8 3,3 Ieee PD
Te3/0/5 auto DS on,on 60.0 6.8 3,3 Ieee PD
Te3/0/6 auto DS on,on 60.0 6.8 3,3 Ieee PD
Codes: DS - Dual Signature device, SS - Single Signature device
SP - Single Pairset device
Interface Admin Type Oper-State Power(Watts) Class Device Name
State Alt-A,B Allocated Utilized Alt-A,B
----------- ------ ---- ------------- --------- --------- ------- -----------
Te3/0/7 auto DS on,on 60.0 6.8 3,3 Ieee PD
Te3/0/8 auto DS on,on 60.0 6.8 3,3 Ieee PD
Te3/0/9 auto n/a off 0.0 0.0 n/a
Te3/0/10 auto SS on,off 30.0 5.4 4 Ieee PD
Te3/0/11 auto SS on,off 30.0 9.0 4 Ieee PD
Te3/0/12 auto SS on,off 30.0 9.7 4 Ieee PD
Te3/0/13 auto n/a off 0.0 0.0 n/a
Te3/0/14 auto n/a off 0.0 0.0 n/a
Te3/0/15 auto n/a off 0.0 0.0 n/a
Te3/0/16 auto n/a off 0.0 0.0 n/a
Te3/0/17 auto n/a off 0.0 0.0 n/a
Codes: DS - Dual Signature device, SS - Single Signature device
SP - Single Pairset device
Interface Admin Type Oper-State Power(Watts) Class Device Name
State Alt-A,B Allocated Utilized Alt-A,B
----------- ------ ---- ------------- --------- --------- ------- -----------
Te3/0/18 auto n/a off 0.0 0.0 n/a
Te3/0/19 auto n/a off 0.0 0.0 n/a
Te3/0/20 auto n/a off 0.0 0.0 n/a
Te3/0/21 auto n/a off 0.0 0.0 n/a
Te3/0/22 auto SS on,off 30.0 12.0 4 Ieee PD
Te3/0/23 auto SS on,off 30.0 12.3 4 Ieee PD
Te3/0/24 auto SS on,off 30.0 5.3 4 Ieee PD
--------- ------ ---------- ---------- ---------- ------------------- -----
Totals: 14 on 660.0 107.9
These are descriptions of the fields that you see in the output of the show power inline upoe-plus command:
| Field |
Description |
|---|---|
| Type |
Type of PD: Single Pairset device (SP), Single Signature device (SS), Dual Signature device (DS) |
| Oper-State |
The state of each pair on the port |
| Power Allocated |
Power allocated to the port |
| Power Utilized |
Power consumed by the Powered Device on the port. |
| Class Alt-A, B |
Signal, Spare-pair respectively |
| Device Name |
Name of the Powered Device as advertised by CDP. |
This is a sample output of the show power inline command. This command displays 802.3bt-compliant device information such as the operational status of the device, IEEE class of the device, physical assigned class, allocated power, and power measured at the port.
Device# show power inline g1/0/1 detail
Interface: Gi1/0/1
Inline Power Mode: auto
Operational status (Alt-A,B): on,on
Device Detected: yes
Device Type: Ieee PD
Connection Check: SS
IEEE Class (Alt-A,B): 8
Physical Assigned Class (Alt-A,B): 8
Discovery mechanism used/configured: Ieee and Cisco
Police: off
Power Allocated
Admin Value: 90.0
Power drawn from the source: 49.4
Power available to the device: 49.4
Allocated Power (Alt-A,B): 49.4
Actual consumption
Measured at the port(watts) (Alt-A,B): 5.9
Maximum Power drawn by the device since powered on: 5.9
Absent Counter: 0
Over Current Counter: 0
Short Current Counter: 0
Invalid Signature Counter: 0
Power Denied Counter: 0
Power Negotiation Used: IEEE 802.3bt LLDP
LLDP Power Negotiation --Sent to PD-- --Rcvd from PD--
Power Type: Type 2 PSE Type 2 PD
Power Source: Primary PSE
Power Priority: low critical
PD 4PID: 0 0
Requested Power(W): 43.3 43.3
Allocated Power(W): 43.3 71.3
Requested Power ModeA(W): 0.0 3.5
Allocated Power ModeA(W): 0.0 3.9
Requested Power ModeB(W): 0.0 3.5
Allocated Power ModeB(W): 0.0 3.9
PSE Powering Status: 4 pair SS PD Ignore
PD Powering Status: Ignore 2 pair DS PD
PSE Power Pair ext: Both Alternatives Both Alternatives
DS Class Mode A ext: SS PD Class 2
DS Class Mode B ext: SS PD Class 4
SS Class ext: Class 6 Class 5
PSE Type ext: Type 4 PSE Type 3 SS PD
PSE Max Avail Power: 71.3 51.2
PSE Auto Class Supp: No No
PD Auto Class Req: No No
PD Power Down Req: No No
PD Power Down Time(sec): 0 70
Four-Pair PoE Supported: Yes
Spare Pair Power Enabled: Yes
Four-Pair PD Architecture: Shared
Perpetual POE Enabled: FALSE
Fast POE Enabled: FALSE
Meter Start Time: 2024-03-08 05:00:28 UTC
Metered Energy Value(WattSec):393870.554
This is a sample output of the show power inline police command:
Device# show power inline police
Module Available Used Remaining
(Watts) (Watts) (Watts)
------ --------- -------- ---------
3 1310.0 660.0 650.0
Interface Admin Oper Admin Oper Cutoff Oper
State State Police Police Power Power
--------- ------ ---------- ---------- ---------- ------ -----
Te3/0/1 auto on none n/a n/a 6.8
Te3/0/2 auto on none n/a n/a 6.7
Te3/0/3 auto on none n/a n/a 6.9
Te3/0/4 auto on none n/a n/a 6.8
Te3/0/5 auto on none n/a n/a 6.8
Te3/0/6 auto on none n/a n/a 6.8
Te3/0/7 auto on none n/a n/a 6.8
Te3/0/8 auto on none n/a n/a 6.8
Te3/0/9 auto off none n/a n/a n/a
Te3/0/10 auto on none n/a n/a 5.4
Te3/0/11 auto on none n/a n/a 8.9
Te3/0/12 auto on none n/a n/a 9.5
Te3/0/13 auto off none n/a n/a n/a
Te3/0/14 auto off none n/a n/a n/a
Te3/0/15 auto off none n/a n/a n/a
Interface Admin Oper Admin Oper Cutoff Oper
State State Police Police Power Power
--------- ------ ---------- ---------- ---------- ------ -----
Te3/0/16 auto off none n/a n/a n/a
Te3/0/17 auto off none n/a n/a n/a
Te3/0/18 auto off none n/a n/a n/a
Te3/0/19 auto off none n/a n/a n/a
Te3/0/20 auto off none n/a n/a n/a
Te3/0/21 auto off none n/a n/a n/a
Te3/0/22 auto on none n/a n/a 12.0
Te3/0/23 auto on none n/a n/a 12.2
Te3/0/24 auto on none n/a n/a 5.3
--------- ------ ---------- ---------- ---------- ------ -----
Totals: 107.6
This is a sample output of the show power inline priority command:
Device# show power inline priority
Interface Admin Oper Admin
State State Priority
---------- ------ ---------- ----------
Te3/0/1 auto on low
Te3/0/2 auto on low
Te3/0/3 auto on low
Te3/0/4 auto on low
Te3/0/5 auto on low
Te3/0/6 auto on low
Te3/0/7 auto on low
Te3/0/8 auto on low
Te3/0/9 auto off low
Te3/0/10 auto on high
Te3/0/11 auto on high
Te3/0/12 auto on high
Te3/0/13 auto off high
Te3/0/14 auto off high
Te3/0/15 auto off high
Te3/0/16 auto off high
Te3/0/17 auto off low
Te3/0/18 auto off low
Te3/0/19 auto off low
Te3/0/20 auto off high
Te3/0/21 auto off high
Te3/0/22 auto on high
Te3/0/23 auto on high
Te3/0/24 auto on high
This is a sample output of the show power inline meter command:
Device# show power inline meter
Module Available Used Remaining
(Watts) (Watts) (Watts)
------ --------- -------- ---------
1 1625.0 85.6 1539.4
Interface Meter Update Three Hours Metered Metered Energy in MilliWattSec (15min Buckets)
Time Value (MilliWattSec)
---------- ----------------------- -------------------- ------------------------------------------------------------------------------------------------------------
Tw1/0/1 2024-06-25 20:59:28 UTC 0 0-0-0-0-0-0-0-0-0-0-0-0
Tw1/0/2 2024-06-25 20:59:28 UTC 0 0-0-0-0-0-0-0-0-0-0-0-0
Tw1/0/3 2024-06-25 20:59:28 UTC 0 0-0-0-0-0-0-0-0-0-0-0-0
Tw1/0/4 2024-06-25 20:59:28 UTC 0 0-0-0-0-0-0-0-0-0-0-0-0
Tw1/0/5 2024-06-25 20:59:28 UTC 29439712 2373112-2460600-2460600-2460600-2460600-2460600-2460600-2460600-2460600-2460600-2460600-2460600
Tw1/0/6 2024-06-25 20:59:28 UTC 29166857 2355512-2440250-2439315-2443385-2430515-2443000-2438380-2436620-2435080-2427600-2433650-2443550
Interface Meter Update Three Hours Metered Metered Energy in MilliWattSec (15min Buckets)
Time Value (MilliWattSec)
---------- ----------------------- -------------------- ------------------------------------------------------------------------------------------------------------
Tw1/0/7 2024-06-25 20:59:28 UTC 0 0-0-0-0-0-0-0-0-0-0-0-0
Tw1/0/8 2024-06-25 20:59:28 UTC 0 0-0-0-0-0-0-0-0-0-0-0-0
Tw1/0/9 2024-06-25 20:59:28 UTC 0 0-0-0-0-0-0-0-0-0-0-0-0
Tw1/0/10 2024-06-25 20:59:28 UTC 0 0-0-0-0-0-0-0-0-0-0-0-0
Tw1/0/11 2024-06-25 20:59:28 UTC 29375104 2367904-2455200-2455200-2455200-2455200-2455200-2455200-2455200-2455200-2455200-2455200-2455200
Tw1/0/12 2024-06-25 20:59:28 UTC 0 0-0-0-0-0-0-0-0-0-0-0-0
Tw1/0/13 2024-06-25 20:59:28 UTC 0 0-0-0-0-0-0-0-0-0-0-0-0
Tw1/0/14 2024-06-25 20:59:28 UTC 0 0-0-0-0-0-0-0-0-0-0-0-0
Tw1/0/15 2024-06-25 20:59:28 UTC 89776174 7238706-7499648-7504958-7500310-7502066-7509576-7499730-7508690-7501684-7504556-7505350-7500900
Tw1/0/16 2024-06-25 20:59:28 UTC 0 0-0-0-0-0-0-0-0-0-0-0-0
Interface Meter Update Three Hours Metered Metered Energy in MilliWattSec (15min Buckets)
Time Value (MilliWattSec)
---------- ----------------------- -------------------- ------------------------------------------------------------------------------------------------------------
These are descriptions of the fields that you see in the output of the show power inline meter command:
| Field |
Description |
|---|---|
| Meter Update Time |
Power meter sampled time. |
| Three Hours Metered Value (MilliWattSec) |
The "3 hours PoE energy" value, that is, the power consumed on the port for the 3 hour time period. The unit of this value is milliwatt-second. |
| Metered Energy in MilliWattSec (15min Buckets) |
The "15 minutes PoE energy" values, that is, the power consumed on the port for successive periods of 15 minutes each, within the 3 hour time period. The unit of these values is milliwatt-second. These 12 values are for each of 15 minute buckets within the 3 hour period (15 minutes * 12 = 180 minutes = 3 hours). |