Configuring NXDB for Cisco Nexus 9000 Series Switches and Communicating with NSXv Controllers (for Layer 2 VXLANs), Release 7.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- November 15, 2019
Book Table of Contents
- Preface
- Overview of NXDB
- Enabling NXDB and Installing the OVSDB Plugin
- Using the Cisco Nexus 9000 Switch as the Default Gateway
- Configuration Checklist
- Configuring Replication Servers
- Changing the Scope
- Upgrading the Cisco NX-OS Image and the OVSDB Plugin
- Upgrading the Cisco NX-OS Image and the OVSDB Plugin for vPC Setups
- Extended OVSDB Plugin Configuration
- Best Practices for NXDB
- Show Command Outputs
- Debugging NXDB
- IP Addresses Used in vPC Systems
- Configuring the OVSDB Plugin When Deploying a New Controller
Feedback