Prerequisites
-
On switch S1, use the guestshell run sudo ovsdb-plugin service status --more command to verify that OVSDB plugin A1 is connected to controller C and switches S1 and S2.
-
On switch S2, use the guestshell run sudo ovsdb-plugin service status --more command to verify that OVSDB plugin A2 is connected to switches S1 and S2, and the connection to C is down.
-
Make sure that the new OVSDB plugin RPM and JRE8 RPM images are copied to the /bootflash on both vPC switches.
-
Make sure that the new switch image and the new EPLD image are also copied to both vPC switches.