Cisco Nexus 5500 Series NX-OS Interfaces Configuration Guide, Release 6.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: June 30, 2015

New and Changed Information

This chapter contains the following sections:

New and Changed Information

The following table provides an overview of the significant changes made to this configuration guide. The table does not provide an exhaustive list of all changes made to this guide or all new features in a particular release.


Feature	Release	Description	Where Documented
vPC Shutdown	6.0(2)N2(1)	Isolates a switch from the vPC complex.	Configuring vPC Shutdown
Default Interface	6.0(2)N2(1)	You can use the default interface feature to clear the configured parameters for both physical and logical interfaces such as the Ethernet, loopback, VLAN network, and the port-channel interface.	Information About Default Interfaces
BFD	6.0(2)N2(1)	Bidirectional Forwarding Detection support added for these protocols: BGP, EIGRP, OSPF, HSRP, VRRP, Static Routes, and PIM.	Configuring BFD
Port-Channel Minimum Links	6.0(2)N1(2)	Added support for LACP Port-Channel Minimum Links	Configuring Port Channels

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)