Read Me First
 Note |
To achieve simplification and consistency, the Cisco SD-WAN solution has been rebranded as Cisco Catalyst SD-WAN. In addition, from Cisco IOS XE SD-WAN Release 17.12.1a and Cisco Catalyst SD-WAN Release 20.12.1, the following component changes are applicable: Cisco vManage to Cisco Catalyst SD-WAN Manager, Cisco vAnalytics to Cisco Catalyst SD-WAN Analytics, Cisco vBond to Cisco Catalyst SD-WAN Validator, Cisco vSmart to Cisco Catalyst SD-WAN Controller, and Cisco Controllers to Cisco Catalyst SD-WAN Control Components. See the latest Release Notes for a comprehensive list of all the component brand name changes. While we transition to the new names, some inconsistencies might be present in the documentation set because of a phased approach to the user interface updates of the software product. |
Related References
User Documentation
Communications, Services, and Additional Information
-
Sign up for Cisco email newsletters and other communications at: Cisco Profile Manager.
-
For information on the latest technical, advanced, and remote services to increase the operational reliability of your network visit Cisco Services.
-
To browse and discover secure, validated enterprise-class apps, products, solutions, and services, visit Cisco Devnet.
-
To obtain general networking, training, and certification titles from Cisco Press Publishers, visit Cisco Press.
-
To find warranty information for a specific product or product family, visit Cisco Warranty Finder.
-
To view open and resolved bugs for a release, access the Cisco Bug Search Tool.
-
To submit a service request, visit Cisco Support.
Documentation Feedback
To provide feedback about Cisco technical documentation use the feedback form available in the right pane of every online document.
Release Notes for Cisco SD-WAN Control Components, Cisco Catalyst SD-WAN Manager Release 20.15.1
These release notes accompany the Cisco Catalyst SD-WAN Control Components, Release 20.15.x, which provides Cisco Catalyst SD-WAN capabilities. They include release-specific information for Cisco Catalyst SD-WAN Controllers, Cisco Catalyst SD-WAN Validators, Cisco SD-WAN Manager as applicable to Cisco Catalyst SD-WAN.
Related Releases
For release information about Cisco IOS XE Catalyst SD-WAN devices, refer to Release Notes for Cisco IOS XE Catalyst SD-WAN device, Cisco IOS XE Release 17.15.x.
What's New for Cisco Catalyst SD-WAN Manager Release 20.15.1
Cisco is constantly enhancing the Cisco Catalyst SD-WAN solution with every release and we try and keep the content in line with the latest enhancements. The following table lists new and modified features we documented in the Configuration, Command Reference, and Hardware Installation guides.
| Feature | Description |
|---|---|
|
Cisco Catalyst SD-WAN Monitor and Maintain |
|
| Converged Cisco SD-WAN Manager and Cisco SD-WAN Analytics Dashboard |
This feature introduces a converged dashboard in Cisco SD-WAN Manager that merges the monitoring and analytics capabilities from both Cisco SD-WAN Manager and Cisco SD-WAN Analytics. This converged dashboard displays management data from the Cisco SD-WAN Manager alongside analytical insights from Cisco SD-WAN Analytics, all within a single interface. To view a converged dashboard in Cisco SD-WAN Manager, Cisco SD-WAN Analytics must be onboarded into Cisco SD-WAN Manager. |
| Additional Report Types and Formats |
This feature introduces several new report types, including Security reports, which are available in CSV or PDF format. |
|
Generate new report types and download them in both PDF and CSV formats. The My Reports and the Generate report forms are updated to include additional report filters. |
|
|
This feature enhances the output of the admin-tech file with additional command output information. With this feature, You can generate a customized admin-tech file with the required show command output details to help in troubleshooting. Custom admin-tech is independent of tech, core, and logs flag. |
|
|
Cisco Catalyst SD-WAN Security |
|
|
Cisco SD-WAN Manager shares VPN and security group tag (SGT) information with Cisco Security Service Edge (SSE). This is called context information. SSE applies different policies to traffic based on the context information of the traffic. |
|
|
Cisco Catalyst SD-WAN Systems and Interfaces |
|
| Configure EtherChannels using Configuration Groups | With this feature you can configure EtherChannels on service and transport side using configuration groups. |
|
Load Balancing for EtherChannels on Individual Port Channels |
With this feature you can load balance EtherChannels for individual port channels on service and transport side using CLI templates. |
| Feature | Description |
|---|---|
|
Cisco Catalyst SD-WAN Getting Started |
|
| Introduces 4096-bit RSA key support for certificate signing requests (CSR) for enterprise certificates. | |
|
Cisco Catalyst SD-WAN Policy Groups |
|
The following enhancements are introduced with this release:
|
|
| Feature | Description |
|---|---|
|
Cisco Catalyst SD-WAN Systems and Interfaces |
|
|
With this feature, you can configure Layer 2 VPN on multiple devices on the same site in an active/standby configuration. This feature also enables Layer 2 connections using an indirect path, such as a hub, for point-to-multipoint connections within the Cisco Catalyst SD-WAN fabric. |
|
| Configure EtherChannels using Configuration Groups | With this feature you can configure EtherChannels on service and transport side using configuration groups. |
|
Load Balancing for EtherChannels on Individual Port Channels |
With this feature you can load balance EtherChannels for individual port channels on service and transport side using CLI templates. |
|
Cisco Catalyst SD-WAN Routing |
|
|
BFD Troubleshooting for Cisco Catalyst SD-WAN Using Radioactive Tracing |
This feature provides the ability to troubleshoot BFD protocols using radioactive (RA) tracing. RA tracing enables debug logs across various processes which participates and handles a particular BFD session. |
|
This feature enables efficient distribution of one-to-many traffic for hub and spoke devices. The multicast routing protocols like, IPv4 Multicast, IGMPv3, PIM SSM, PIM ASM, Auto RP and Static RP distribute data to multiple recipients. Using multicast overlay protocols in hub and spoke topology, a source can send a single packet of data to a single multicast address, which is then distributed to an entire group of recipients. |
|
|
Cisco Catalyst SD-WAN Policies |
|
|
This feature uses adjacency MTU to combine with underlay fragmentation which allows the successful transmission of packets that exceed the MTU limitations by breaking them down into manageable fragments and ensuring their reliable delivery. |
|
|
You can set a remote preferred color in the data policy to control traffic routing based on the SLA criteria. See for Configure Traffic Rules information. |
|
|
With this feature, you can deploy Palo Alto Networks firewall on Equinix and attach a service chain to Equinix interconnect gateway from the Workflow Library in Cisco SD-WAN Manager. |
|
|
Cisco Catalyst SD-WAN Security |
|
|
This feature provides the ability to define and configure a new single Cisco Umbrella credential for both Umbrella SIG and Umbrella DNS. |
|
|
This feature enhances the Security Group Access Control List (SGACL) logging capability by using High Speed Logging (HSL) for Cisco IOS XE Catalyst SD-WAN devices. SGACL logging through HSL provides a logging method for security events that is more efficient and capable of scaling, useful in network environments experiencing high volumes of traffic. |
|
|
This feature supports configuration of one or more Zscaler sub-locations for a given location. |
|
|
By implementing High Availability (HA) in Cisco Catalyst SD-WAN, you can set up two Cisco IOS XE Catalyst SD-WAN devices in either active-active or active-standby configurations. When HA is enabled, features like the Zone Based Firewall (ZBF) and Network Address Translation (NAT) utilize this functionality to synchronize their states between the devices, whether in active-standby or active-active modes. In the event of a failure of the active device, the standby device seamlessly takes over operations without interrupting session flows, thus eliminating the need for reconnection. |
|
|
Cisco SD-WAN Manager shares VPN and security group tag (SGT) information with Cisco Security Service Edge (SSE). This is called context information. SSE applies different policies to traffic based on the context information of the traffic. |
|
|
Cisco Catalyst SD-WAN Cloud OnRamp |
|
|
Cisco SD-WAN Manager allows you to select specific SaaS applications and identify best performing paths for each of these SaaS applications using a fully-guided workflow. |
|
|
Cisco Catalyst SD-WAN Monitor and Maintain |
|
|
Configure a WebHook URL in Cisco SD-WAN Manager to receive alarm notifications in Webex or Slack. |
|
|
Connect to and troubleshoot Cisco Catalyst SD-WAN solution using Cisco RADKit |
Use tools and Python modules from Cisco Remote Automation Development Kit (RADKit) to securely connect to remote terminals, WebUIs, or desktops. Using RADKit, a TAC engineer can request the required information during the troubleshooting process, from the various devices and services, in a secure and controlled way. |
|
This feature enhances the output of the admin-tech file with additional command output information. With this feature, You can generate a customized admin-tech file with the required show command output details to help in troubleshooting. Custom admin-tech is independent of tech, core, and logs flag. |
|
|
This feature provides a single chart option in Cisco SD-WAN Manager for viewing packet duplication information for tunnels. |
|
|
Cisco Catalyst SD-WAN NAT |
|
|
Use an application-level gateway (ALG) to interpret the application-layer protocol and perform service-side NAT translations for FTP protocol. |
|
|
Cisco Catalyst SD-WAN Multi-Region Fabric (also Hierarchical SD-WAN) |
|
|
Cisco SD-WAN Manager introduces a fully-guided workflow that allows you to create multiple regions within your Cisco Catalyst SD-WAN fabric and assign Cisco SD-WAN Controllers to them. |
|
|
Policy Groups |
|
|
You can set a remote preferred color in the AAR policy to control traffic routing based on the SLA criteria. |
|
|
Level topology attribute is supported for custom topologies where you could choose between Sites and Regions. When you add rules to your topology, match conditions using the Region condition. |
|
|
Associate devices from a particular region or subregion while deploying policy groups. |
|
|
Cisco Catalyst SD-WAN Configuration Groups |
|
|
This feature introduces a catalog functionality which provides a collection of pre-defined intent based configurations and policies. The Cisco Catalyst SD-WAN Portal hosts the catalog service, which is managed by Cisco. The Cisco SD-WAN Manager can download the readily available, cloud-hosted catalog entries from the Cisco Catalyst SD-WAN Portal and customize them as needed before deploying the configuration objects from the catalog entry onto devices in their network. |
|
|
This feature introduces a method for creating configuration groups directly on the Configuration Groups page of Cisco SD-WAN Manager without launching a workflow. After selecting a product solution, you can create a configuration group based on the available profiles for that solution. Cisco SD-WAN Manager creates the configuration group with the required profiles, which you can configure based on your requirement. This feature allows you to reuse previously created profiles. You can create, manage, and deploy the configuration group from one page. |
|
|
Support for Specifying Default Values for Device Specific Variables of a Feature |
You can provide a default value along with description to feature parameters when you select the Device Specific scope. Cisco SD-WAN Manager applies the default value of the parameter to the device while deploying the configuration group. |
|
Cisco Catalyst SD-WAN Network-Wide Path Insight User |
|
|
This feature provides enhancements to the Network-Wide Path Insight feature to provide granular visibility into the IPsec drops. |
|
|
Cisco Managed Cellular Activation |
|
|
Managed Cellular Activation support for the IoT platforms and modules |
The Managed Cellular Activation solution is supported in the IoT platforms and modules. |
|
Cisco Catalyst SD-WAN Rugged Series Router Configuration Guide |
|
|
This feature allows you to configure and manage the GNSS (Global Navigation Satellite System) PIM module on Cisco IOS XE Catalyst SD-WAN devices using Cisco SD-WAN Manager. |
|
|
Deploying Smart Licensing Using Policy in Cisco Catalyst SD-WAN |
|
|
Introduced the License Assignment Workflow for assigning licenses to devices. |
|
|
Cisco Catalyst SD-WAN Integrations |
|
|
Cisco SD-WAN Manager supports integration with the Cisco Cyber Vision network security solution. You can configure devices in the network to monitor and inspect traffic on one or more interfaces and send traffic metadata or a copy of your network traffic to Cisco Cyber Vision Center to analyze it for security concerns. |
|
|
Field |
Description |
|---|---|
|
Interconnect Between Cisco Catalyst SD-WAN and Cisco Meraki SD-WAN |
Cisco SD-WAN Interconnects is an automated workflow which enables administrators to easily configure, deploy, and monitor an interconnect between Cisco Catalyst SD-WAN and Cisco Meraki SD-WAN topologies using the Cisco Meraki dashboard. You can monitor IPsec tunnel status, eBGP session status, and VPN tunnel statistics from the Interconnects page on the Cisco Meraki dashboard. |
Software and Hardware Behavior Changes in Cisco Catalyst SD-WAN Manager Release 20.15.x
Software and Hardware Behavior Changes in Cisco Catalyst SD-WAN Control Components Release 20.15.2
|
Behavior Change |
Description |
|---|---|
|
Routes that are re-originated from a site through the transport gateway are filtered out by the Cisco Catalyst SD-WAN Controller. These re-originated routes are not sent back to the originating site or the sites which share same site ID as the originating site. The re-originated routes are only distributed to different sites within the Cisco Catalyst SD-WAN network. |
See the Re-originating Routes section. |
Software and Hardware Behavior Changes in Cisco Catalyst SD-WAN Control Components Release 20.15.1
|
Behavior Change |
Description |
|---|---|
|
When configuring a configuration group for Cisco IOS XE Catalyst SD-WAN devices, to configure cellular connectivity, you can add a Cellular Profile. To add a Cellular Profile, open the Transport & Management Profile, add a Cellular Controller feature, then add a Cellular Profile as a child feature of Cellular Controller. The Cellular Profile includes fields for the authentication credentials to connect to a cellular network. When you enter a password in the Profile Password field, Cisco SD-WAN Manager encrypts the password. When you display the CLI commands that make up a device configuration in the configuration preview, Cisco SD-WAN Manager displays the password in its encrypted form, not as plain text. |
See the Cellular Profile section. |
|
There is a default RBAC role called security_operations. In Cisco Catalyst SD-WAN Manager Release 20.13.x and 20.14.x, this role included permission to enable or disable Cloud SaaS feeds. In Cisco Catalyst SD-WAN Manager Release 20.15.x, the security_operations role no longer has this permission. |
See the Restrictions for Role Based Access Control section. |
|
Updated the aaa netconf-accounting command with supported options. |
See the aaa netconf-accounting command. |
|
Unsupported SHA-1 authentication |
From Cisco Catalyst SD-WAN Control Components Release 20.15.1, the SHA-1 authentication algorithm is not supported. If an SNMPv3 user is configured with SHA-1 authentication, the upgrade to Release 20.15.1 or later fails and displays an error indicating the use of deprecated security configurations. To proceed with the upgrade, you must complete one of the following actions either before or during the upgrade:
For more information, see SNMP Configuration Guide |
|
The attachfeature API now requires the |
For more information, see Feature Template |
Software and Hardware Behavior Changes in Cisco IOS XE Catalyst SD-WAN Release 17.15.1a
|
Behavior Change |
Description |
|---|---|
|
Updated the show platform software ipsec fp active flow command output. |
The output of the show platform software ipsec fp active flow has been modified. The flow ID now supports a range between 0 - 4294967295. See the show platform software ipsec fp active flow command. |
|
Updated the SLA class threshold values. |
See the SLA Classes section, which describes the new SLA class threshold values. |
|
Updated the request platform software sdwanadmin-tech command with supported options. |
See the request platform software sdwan admin-tech command. |
|
Updated the Policy Object Profile section with the new behavior on pagination when there are more than 50 profiles. |
See the Policy Object Profile section. |
|
Updated the size limit of the organization name to the range 1 to 128 for the organization-name command and the size limit of the interface name to the range 1 to 31 for the interface command. |
See the sp-organization-name (system) and interface sections. |
|
Updated the Configure Device Values section with the change in configuration groups for rollback timer. Only the Cellular Gateway solution in the configuration groups supports the rollback timer. |
See the Configure Device Values section. |
|
Updated the View Cflowd Information section for the show sdwan app-fwd cflowd commands to include support for up to 4000 flow records for each monitor (IPv4 and IPv6) from the cflowd database. |
See the View Cflowd Information section. |
|
Updated the Configure BFD for Routing Protocols section to include that the BFDs on the tunnel interface are inactive if sdwan mode is not configured for the tunnel interface. |
See the Configure BFD for Routing Protocols section. |
|
Information about provider and tenant remote servers and images on Cisco SD-WAN Manager. |
See the Provider and Tenant Remote Servers and Images section. |
|
Configuration of devices in SDCI cloud gateway extension using configuration groups is not supported. |
See the Information About Configuring Devices for AWS Integration Using Configuration Groups section. |
|
The policer increases the burst value when the user-configured value is lower than the calculated value, to prevent congestion and ensure optimal performance. |
See the Policer Burst Tolerance section. |
|
A static IP address is assigned by default if you assign a private color to a WAN interface while configuring a site using the configuration group workflow. |
See the Overview of Configuration Group Workflows section. |
|
Updated the Response Code End field in the Hunt Stop Rules table for consistency. |
See the Server Group section. |
|
In Cisco IOS XE Catalyst SD-WAN Release 17.14.1a and earlier, click the Send to Validator button to send only the controller's serial number once to the Cisco Catalyst SD-WAN Validator. |
See the Send the Controller Serial Numbers to Cisco Catalyst SD-WAN Validator section. |
Important Notes, Known Behaviors, and Workarounds
Multi-Region Fabric
Cisco IOS XE Catalyst SD-WAN Release 17.15.x and Cisco Catalyst SD-WAN Control Components Release 20.15.x are the last releases to support these features:
-
Secondary regions
-
Subregions
-
Management regions
From Cisco IOS XE Catalyst SD-WAN Release 17.15.1a and Cisco Catalyst SD-WAN Control Components Release 20.15.1, configuration of these features is possible only by API.
Because later releases do not support these features, we advise you to update your network design and configuration to use alternative solutions where possible.
See End of support for three types of regions for further details.
Upgrade Matrix for Cisco Catalyst SD-WAN
Upgrade Matrix Tool
What’s changingWe have transitioned upgrade path information to the new Upgrade Matrix Tool.
Why the new toolThis interactive tool provides a release-specific view of supported upgrade paths, compatibility checks, and prerequisites—helping you quickly identify the optimal upgrade route.
What the tool offers-
Interactive, release-specific upgrade path information
-
Compatibility checks and prerequisites
-
Advanced search and filtering for faster results
For compatibility information and server recommendations, see Cisco Catalyst SD-WAN Controller Compatibility Matrix and Server Recommendations.
For information about Cisco SD-WAN Manager upgrade procedure, see Upgrade Cisco SD-WAN Manager Cluster.
Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.x
This section details all fixed and open bugs for this release. These are available in the Cisco Bug Search Tool through the Resolved Bug Search.
Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.4
Resolved Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.4
|
Identifier |
Headline |
|---|---|
|
Template push for large number of devices is failing |
|
|
20.18: Vault exited after upgrade in the DR Cluster. |
|
|
User is unable to deploy firewall High Availability Interconnect on Sub-Interface using Cisco SD-WAN Manager |
|
|
Java "Too many open files" error seen to due "analytics.sdwan.cisco.com" connection not closed |
|
|
20.15 Zscaler SSE: Same location name should not allow entering the same location name for dual routers. |
|
|
20.15.2 : UTD installation failing due to Error 416 after doing DR Switchover |
|
|
Cisco SD-WAN Manager GUI running 20.12.4 is missing categories |
|
|
Cisco SD-WAN ManagerReference Count not displaying any policies attached |
|
|
Cisco SD-WAN Manager could experience high CPU with config-db during Stats/Data collection |
|
|
Topology Policy is missing Match Aggregate Origin |
|
|
Replication failure on DC-DR |
|
|
Cisco SD-WAN Manager is not showing any license with the message "There are no licenses available in your license repository for the selected devices.Please add licenses or use a different Smart Account and Virtual Account with available licenses." |
|
|
Cisco SD-WAN Manager count update on c8200-1N-4T triggers vdaemon high and show sdwan commands get stuck |
|
|
Replication breaks for the whole cycle due to disaster recovery leadership changing during export. |
|
|
SaaS/vQoE score page doesn't work without settings feature read |
|
|
Cisco SD-WAN Manager GUI memory utilization discrepancy for monitor versus system status |
|
|
Need retries for disaster recovery nodes to inform data center about successful replications |
|
|
Catalyst Manager SSO does not parse SAML Metadata due to unsupported SOAP |
|
|
dbgd should be non-critical/restartable process |
|
|
Stats files are not being processed in two standby nodes |
|
|
Need encryption support for SNMP SHA-256 config done using CLI add-on template |
|
|
The DC (primary) cluster does not log out the replication user after config-db/stats sync by DR (secondary) cluster |
|
|
Catalyst Manager SSO - EntityID/Issuer is not parsed correctly from SAML Response |
|
|
Cisco SD-WAN Manager memory leak with SLA Violation events due to NWPI Auto-On Task running in the background |
|
|
Cisco Catalyst 8000V certificate install failed |
|
|
Template pull model creates HTTP session to Cisco SD-WAN Manager. Session is not closed properly by device |
|
|
Handling device migration flow in DDC |
|
|
Configuration Group: CSV File Import Error for Subnet Mask |
|
|
64GB Cisco SD-WAN Manager neo4j off-heap memory keeps increasing caused oom-killer |
|
|
Configuration group can not be pushed due to error Duplicate Tag Name |
|
|
Enhancement - "Certificate Expiring" Alarm not present on Alarm notification. |
|
|
In 20.9.5.2-li Cisco SD-WAN Manager, seeing incorrect SIM status in Monitor dashboard |
|
|
DNS Channel uses same source port in every connection |
|
|
Policy Group Service Chain Errors |
|
|
20.15 // IR8340 - "Device is not categorised for Licensing" |
|
|
In 20.12.4 Cisco SD-WAN Manager, the rootfs.rw was filled 100% |
|
|
In 20.9 code, cluster config node credentials are double encrypted |
|
|
Cisco SD-WAN Manager TCP Optimization Policy Group - NullPointerException |
|
|
Cisco SD-WAN Manager olap-db query_log bloated - 20.15.1 |
|
|
Cisco SD-WAN Manager config-db upgrade failing for clusters with higher db sizes > 8 GB (20.9 to 20.12 upgrade) |
|
|
QuickConnect utility in Cisco SD-WAN Manager will not accept any .csv files in Firefox |
|
|
Remote users assigned to a scope are not displayed under "assigned users" on the scope page |
|
|
Periodic UTD signature upgrade task created daily, due to wrong meta data info. |
|
|
UX2.0 can't deploy Policy Group, UTD VPG0 has Bad Mask /24 for address 192.1.0.255 |
|
|
neo4j database running out of threads after switchover |
|
|
Add REST API to toggle the adaptive statistics collection |
|
|
In 20.12.3.1, customer instance didn't boot after installing the web certificate and reboot |
|
|
Even after completing on-demand troubleshooting, no data is displayed in SAIE. |
|
|
Post disaster recovery switchover, edge serial list has to be pushed to all controllers. |
|
|
Cisco SD-WAN Manager not sorting enterprise cert serial numbers by expiration date |
|
|
17.12.4b Cisco IOS XE Catalyst SD-WAN device missing line config after deploying CG from 20.15.2 |
|
|
In multitenant environment tunnel endpoints names are displayed incorrectly |
|
|
Post 20.12.4 upgrade, a remote user with namelen > 32 characters cannot access vshell |
|
|
Unable to create unified policy with IPv6 rule when any other rule has AIP with TLS action decrypt |
|
|
In Cisco Catalyst SD-WAN Control Components Release 20.12.4, replication is stuck in "ImportPending" on the standby cluster |
|
|
Cisco SD-WAN Manager crash with error software initiated - vdaemon-4 exited with 1. |
|
|
NWPI trace does not provide the valid enduser name and ip address in Cisco SD-WAN Manager audit log |
Open Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.4
|
Identifier |
Headline |
|---|---|
|
Cisco SD-WAN Manager reloads due to ConfD got signal 9 due to clickhouse memory exhaustion |
|
|
Cisco SD-WAN Manager GUI upgrade from 20.15.2 to 20.15.3 fails, user should use CLI to upgrade |
|
|
In a scenario, On SNs, certificate status shows "Not Configured", even though it is configured. |
|
|
High CPU utilization on multiple Cisco SD-WAN Manager cluster nodes randomly 20.9.5.2.7 |
|
|
[Tail-f PS-47138] Cisco SD-WAN Controller upgrade from 20.9.4.1-li to 20.12.2-li fails because of CDB boot error |
|
|
OMP Site Down alarms not clearing in timely manner |
|
|
Control connections down due to controller certificate missing on all the controllers. |
|
|
TSN:C1131-8PWB - Current running config is not getting pulled for CLI template push verification |
|
|
SDR CLI config group issue |
|
|
Unable to come up control connections with Cisco SD-WAN Controllers after they are added and down/up |
|
|
Embedded Security Rules fail to load due to high number of service profiles |
|
|
Cisco SD-WAN Manager active user session gets flushed out within 10 minutes of login. This causes abrupt UI logouts |
|
|
20.12.4.1 - One IDP enabled and one IDP disabled causes Internal Server Error |
|
|
Cisco SD-WAN Manager push "media-type rj45" when trying to configure duplex on ISR1k |
|
|
Rate limit value for URL non bulk api will be reset to default "100" after reboot in 20.12 / 20.15 |
|
|
Unable to activate SD-AVC Cloud Connection due to authorization failure |
|
|
Follow up on lodash upgrade |
|
|
API random return code 409 when switching tenants to collect data |
|
|
Cisco SD-WAN Manager 20.12 removes NAT egress-interface option from Cisco IOS XE Catalyst SD-WAN device config |
|
|
Post disaster recovery switchover, certificate workflow was not able to reach to Cisco Catalyst SD-WAN Validator |
|
|
PPPoE with NAT DIA feature validation failed post controller upgrade from 20.9, 20.10 to 20.12.3.1 |
Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.3.1
Resolved Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.3.1
|
Identifier |
Headline |
|---|---|
|
Cisco SD-WAN Manager: Java "Too many open files" error seens to due "analytics.sdwan.cisco.com" connections not being closed. |
Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.3
Resolved Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.3
|
Identifier |
Headline |
|---|---|
|
Cisco SD-WAN Manager: Error while configuring BGP comminity via configuration group |
|
|
Cisco SD-WAN Manager : The Redirect DNS UX2.0 policy-group action results in a JSON Payload error. |
|
|
20.15: The network hierarchy does not allow the removal of an empty subregion. |
|
|
20.15.1-390- Object tracker elements are not visible in VRRP after configuring. |
|
|
TACACS users are unable to login to Cisco SD-WAN Manager via GUI or CLI after Cisco SD-WAN Manager upgrade to 20.12.x |
|
|
NULL entries seen on standby cluster nodes credential after standby cluster reboot/failure. |
|
|
The Policy Group default application policy does not adhere to Cisco Validated Design DSCP marking. |
|
|
Cisco SD-WAN Manager Sync smart or serial upload is failing due to huge neo4j query getting invoked. |
|
|
Cisco SD-WAN Manager : License assignment fails with an error when the SA name contains UTF-8 characters (e.g., รถ). |
|
|
20.15 // CSV file will be downloaded with empty fields (corrupted) if any template variable have "#" in it. |
|
|
Cisco SD-WAN Manager 20.15.1: Cloud on Ramp for Multicloud - Failed to associate AWS account using IAM Role. |
|
|
BFD_TLOC_DOWN is not distributed across all nodes in a 6 node cluster. |
|
|
20.15 Can't remove optional parameter of subregion from a configuration group. |
|
|
The new NGFW name is not reflected on device configuration. |
|
|
Follow up on CSCwj39594. 6-Node cluster DR Replication not working in certain scenarios. |
|
|
Configuration Group: Side by side preview has a scrollbar for old and new configurations. |
|
|
When duplicating a CG/Profile, the old name appears at the top but cannot be selected. |
|
|
Cisco SD-WAN Validator is unavailable after upgrade to version 20.15.2 |
|
|
SSH remains allowed even with no allow-service sshd. |
|
|
Not able to update VPN Interface Cellular Feature template. |
|
|
20.9.6 Cisco SD-WAN Manager keys are getting corrupted which is causing DR to break. |
|
|
Configuration Group: Maximum IP MTU value for HundredGigE sub-Interface is 2000. |
Open Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.3
|
Identifier |
Headline |
|---|---|
|
[Tail-f PS-46733] Cisco SD-WAN Controller upgrade from 20.9.4.1-li to 20.12.2-li fails because of CDB boot error. |
|
|
UX2.0 can't deploy Policy Group, UTD VPG0 has Bad Mask /24 for address 192.1.0.255 |
|
|
Cisco SD-WAN Manager active user session gets flushed out within 10 min of login causing abrupt UI logouts. |
|
|
Cisco SD-WAN Manager 20.12 removes NAT egress-interface option from Cisco IOS XE Catalyst SD-WAN device configuration. |
|
|
Cisco SD-WAN Manager pushes "media-type rj45" when trying to configure duplex on ISR1k. |
|
|
Getting intermittent error : "None of the devices belong to resource group". |
|
|
Rogue NWPI Auto-On task causing memory leak resulting in java OOM errors, causes GUI failure. |
Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.2
Resolved Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.2
|
Identifier |
Headline |
|---|---|
|
Cisco SD-WAN Manager upgrade to version 20.12.3 with 32vCPU on-prem High CPU alarms. |
|
|
20.15.2: "adminresetrequired?component=configdb" API timing out on Cisco SD-WAN Manager UI. |
|
|
20.15 Magnetic: After deploying mobility configuration group - WIFI parcel is missing default values. |
|
|
20.15: Unable to enter comma separated subnets for IP Subnet Pool in global settings. |
|
|
Web server certificate migration failure to vault after upgrade. |
|
|
High CPU alarms/ alerts are seen every 30 mins to one hour in 20.6.5.1.13 code. |
|
|
Creation of global setting and CGW fails when PAYG option is selected. |
|
|
Summary page of nfv CG workflows shows value of "color" for the field that is labeled as "Type". |
|
|
CiscoHosted: Upon upgrade to 20.12.4, sdavc custom apps are not pushed to sdavcSaas. |
|
|
Color Group getting removed after Applying the AAR Policy to COR for SAAS. |
|
|
Cisco SD-WAN Manager Rejects SAML Responses that Include Line Breaks. |
|
|
20.15: Security Policy page loading continuously for read only users with custom scope. |
|
|
Elasticsearch server CPU high due to JVM JIT deoptimization issue on getMonthOfYear(). |
|
|
False error "Subject serial num mistmatch" come up on ZTP server syslog. |
|
|
Cisco SD-WAN Manager : License count mismatch between Cisco SD-WAN Manager & CSSM portal with Online reporting. |
|
|
Cisco SD-WAN Manager DR : Replication not happening due to Lock not released on Standby. |
|
|
With one interconnect connection VPN update, other interconnect connections VPN gets updated in ICGW. |
|
|
Bfd events are not getting published to messaging server in cluster setup. |
|
|
Failure to deploy same NFV CG with Switch parcel to different NFVIS devices. Validation error on switch. |
|
|
The data-policy-commit-failure notification promote to alarm. |
|
|
Cisco SD-WAN Manager DR: DR registration doesnt proceed and task is stuck for 12+ hours. |
|
|
WANI app lists are shown in policy compliance check. |
|
|
Change partition task stuck, during Cisco SD-WAN Manager upgrade activation from 20.12 to 20.14 |
|
|
Configuration Group: cannot Save IPSEC Feature after edit. |
|
|
Cisco SD-WAN Manager UI menu doesn't reflect the Configuration -> Devices post cluster upgrade to 20.12.x. |
|
|
Site selected in topology policy are not saved. |
|
|
[MRF] Region field is missing from the internal parcel while deploying the config-group. |
|
|
Cisco SD-WAN Manager GUI becomes intermittently unavailable on 20.9.3 cluster in round robin fashion |
|
|
OMP extranet policy not exporting all the routes for the prefixes. |
|
|
In Cisco SD-WAN Manager running 20.12.1 code, the DE registration was stuck in pending state for several days. |
|
|
Import configuration group task fails with TACACs server configuration present. |
|
|
Cannot add transport to Multi Region Fabric. |
|
|
Cisco SD-WAN Manager NMS services do not start after upgrading from 20.9.3ES2 to 20.15EFT2 |
|
|
Local User not able to login on Cisco SD-WAN Manager 20.12.3, auth-fall back fails when "priority" is configured. |
|
|
Custom logo does not work on Cisco SD-WAN Manager. |
|
|
Introduce Transaction timeout in Neo4j. |
|
|
Route policy template: Statements missing from deployed route-map. |
|
|
The communication between Cisco SD-WAN Managercluster gets break due to routes overlapping with Eth4 interface. |
|
|
Preferred color group not available in traffic policy. |
|
|
DCA folder grows, the volume size of /opt/data is affected. |
|
|
Need pop-up to display warning banner on 20.9 and 20.12 stating "SHA/AES-128 deprecation" . |
|
|
MTT : Tenant creation fails "Failed to create tenant". |
|
|
Configuration group deployment: Device variables not grouped together. |
|
|
Cisco SD-WAN Manager VPN templates corrupted after upgrade to 20.12.x. |
|
|
DR switchover: BFD tloc down alarms are not getting cleared thereby causing stale alarm issues. |
|
|
Cisco SD-WAN Manager API: User with only Interface read-only access can see the connected user list. |
|
|
The 'service local' is not pushed to WAN Edges after upgrade from 20.9.5 to 20.12.4. |
|
|
Cisco SD-WAN Manager cannot deploy a configuration group on a Cisco IOS XE Catalyst SD-WAN device added by a tag rule. |
|
|
Cisco NFVIS SD-Branch: 2nd device not upgrade in the same site-id after the 1st device is upgraded successfully |
|
|
Policy Group: Cloud OnRamp gateway service VPN is only showing VPN 512 interfaces. |
|
|
Unable to edit object tracker on static NAT entries when there are a lot of entries. |
|
|
Not able to add new tracker while using Generic on Cisco Secure Internet Gateway (SIG). |
|
|
Cisco SD-WAN Manager upload NBAR Protocol Pack fails. |
|
|
Statistics data is not visible after upgrading to 20.12.3.1 MTT setup. |
|
|
Wasted space in Policy Application page. |
|
|
Network Hierarchy should not have white spaces, unable to activate topology group. |
|
|
SDWAN-Manager : DR Replication failure due to thread's getting stuck. |
|
|
Transport Gateway: WAN Edge Receives Re-Originated Route with it's own Site ID. |
|
|
6 + 6 DR cluster elects replication leader which has no config-db and fails to connect to Neo4j. |
|
|
20.15 - Cisco SD-WAN Manager generates UTD container profile as low though profile is configured as high/medium ! |
|
|
20.9.4.1 Cisco SD-WAN Manager app-server restarted due to app-server OOM Java heap space. |
|
|
After Applying SaaS, AAR Policy in the GUI differs from AAR Policy in the CLI. |
|
|
Cisco SD-WAN Manager single node upgrade: upgrade coordinator task is stuck. |
|
|
Configuration group: Switchport parcel interface errors and variables are cut off by window size. |
|
|
Save option greyed out when trying to edit SNMP parcel. |
|
|
CloudOps unable to leverage ciscotacrw for maintenance when DUO is configured. |
|
|
Host-agent Failed to activate MT DR single node Cisco SD-WAN Manager Error: Software Operations script failed. |
|
|
ND deployment fail Deployment c8kv failed with error: Bootstrap File not found. |
|
|
Edit of basic parcel fails with "Required But Missing Attributes for transportGateway.value" |
|
|
Cisco SD-WAN Manager upgrade from 20.12.3.1 to 20.15.1 fails in post-upgrade-check-fail. |
|
|
Customer migrated from 20.9.5 to 20.15.1 and all their devices are showing no license assigned. |
|
|
Making messaging-server robust. |
|
|
TAC Case Option in Cisco SD-WAN Manager does not redirect correctly. |
|
|
Importing the SDWAN CG fails due to validation errors: data.advanced.tracker is not defined in the schema attributes. |
|
|
Manipulate driver of Neo4j and ES to use static logger instead of new logger (Cisco SD-WAN Manager Slowness 20.6) |
|
|
Configuration group: Feature parcels from policy profile are duplicated by copy function. |
|
|
SDWAN Manager: control policy is getting removed during configuration sync. |
|
|
Virtual device CoR SaaS info not cleaned up from DB on decommissioning. |
|
|
Viptela Platforms are not following RFC standard for command accounting. |
|
|
Creation of customer policy configuration from API fails on latest 20.16 |
|
|
Continuous logs being generated by Cisco SD-WAN Manager. |
|
|
Configuration group: Dual router feature parcel 'save' issues. |
Open Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.2
|
Identifier |
Headline |
|---|---|
|
20.15.2 : UTD installation failing due to Error 416 after doing DR Switchover. |
|
|
Need encryption support for SNMP SHA-256 config done via add-on CLI. |
|
|
Cisco SD-WAN Manager : Redirect DNS UX2.0 policy-group action gives JSON Payload error. |
|
|
In a scenario, On SNs, Certificate Status shows "Not Configured", even though it is configured. |
|
|
Cisco SD-WAN Manager GUI is continuously loading and display of backend code indicating potential code leakage. |
|
|
2015: CSDL GET /device/models Fails Ace tests. |
|
|
Brownfield Scenario: Able to select cxp app lists in DIA and SIG. |
|
|
Multiple active userSessions exist on Cisco SD-WAN Manager even after controller upgrade transaction completes |
|
|
20.15:SD-routing CG parcel Deployment-status show Sync Pending - Device is offline/Re-deploy CG fix. |
|
|
[Tail-f PS-46733] Cisco SD-WAN Controller upgrade from 20.9.4.1-li to 20.12.2-li fails because of CDB boot error. |
|
|
UX2.0 can't deploy Policy Group, UTD VPG0 has Bad Mask /24 for address 192.1.0.255 |
|
|
Cisco SD-WAN Manager active user session gets flushed out within 10 min of login causing abrupt UI logouts. |
|
|
TSN:C1131-8PWB - Current running configuration is not getting pulled for CLI template push verification. |
|
|
SDWAN: "Routing DNA HA Advantage" license not visible in Cisco SD-WAN Manager. |
|
|
IPv6 Prefix push template fails. |
|
|
API random return code 409 when switching tenants to collect data. |
|
|
20.9.6 Cisco SD-WAN Manager keys are getting corrupted which is causing DR to break. |
|
|
Neo4j/GUI is not coming up after Virtual Machine size upgrade. |
|
|
Unable to come up control connections with Controllers after Controllers added and down/up. |
|
|
Cisco SD-WAN Manager olap-db query_log bloated - 20.15.1 |
|
|
Import PG fails: Reason: [{"Validation Errors":{"Required But Missing Attributes"}}]. |
|
|
20.9.5.1 Database panic - The database has encountered a critical error. |
|
|
High cpu utilization on multiple Cisco SD-WAN Manager cluster nodes randomly 20.9.5.2.7 |
|
|
Neo4j getting killled due to OOM resulting in GUI being unavailable even with enough resources. |
|
|
Soln: 20.15.2 unable to push Cisco SD-WAN Controller configuration diff PG from Cisco SD-WAN Manager |
|
|
Unable to Activate SD-AVC Cloud Connection due to Authorization Failure. |
|
|
Cisco SD-WAN Manager 20.12 removes NAT egress-interface option from Cisco IOS XE Catalyst SD-WAN device configuration. |
Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.x
Resolved Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.1
|
Identifier |
Headline |
|---|---|
|
Unable to upload the file by drag and drop function. |
|
|
Delayed notification (webhook) when one of the Webhook server is unreachable. |
|
|
Cisco VPN Interface IPsec template does not send selected parameters to device. |
|
|
Region ID assignment from Network Hierarchy is not mapped to the CLI configuration. |
|
|
Cisco SD-WAN Manager : Serviceproxy hitting UpstreamOverflow-503/RateLimited-429 causing GUI down issues. |
|
|
OMP: Advertiser IPv4 EIGRP cannot configured by Configuration Group. |
|
|
On-prem CSSM server with IPv6 address gives Error while fetching sa/va list RESTEASY004655. |
|
|
Cisco SD-WAN Manager CLI template fails to attach to CG418-E/CG522-E with error "access-denied". |
|
|
POST /template/device/cli Example is not accurate - apidocs. |
|
|
Uuid in certificate CN checks are case-sensitive, request for uuid checks to be case-insensitive. |
|
|
Cisco IOS XE Catalyst SD-WAN Release 17.14.x UX1.0 Config preview show partial output for Static NAT configuration (interface missing). |
|
|
Cisco Catalyst SD-WAN Manager Release 20.13.x: Enforce software version (ZTP) selected version is not reflected after save. |
|
|
Cisco SD-WAN Manager RealTime show commands display incorrect time when devices are configured with IST timezone. |
|
|
Cisco vEdge device cannot resolve Cisco SD-WAN Validator after reboot for software activation. |
|
|
Cisco SD-WAN Manager apidocs missing schema for some parcels. |
|
|
The rest API uniqueAggregation and cellularAggregation need enahnce example and schema. |
|
|
System crash rebooted with "Software initiated - zebra-1 (pid: 4221)" |
|
|
Cisco SD-WAN Manager: Smart account sync API timeout increase. |
|
|
Cisco Catalyst SD-WAN Manager Release 20.14.x : 206 to 231 build. DR : Standby cluster. services One of the node do not start. |
|
|
Validation Error when using public-internet or red color in custom topology policy. |
|
|
Cisco SD-WAN Manager email alarms failing with SSL and TLS connecting to incorrect port 465. |
|
|
VRRP default timer shows 1000ms in GUI but it show 100ms in preview and pushed 100ms to device. |
|
|
Cisco SD-WAN Manager GUI SSH frontend sends too many requests to backend leading to timeouts, session closed. |
|
|
Cisco SD-WAN Manager - ZTP doesn't permit to select a software. |
|
|
Creating a new branch site on Cisco SD-WAN Manager network design using an old name is failing. |
|
|
Custom rollback timer does not take effect. |
|
|
Harden Cisco SD-WAN Manager certificate process. |
|
|
Cisco SD-WAN Manager variables inconsistent for CSV export of device template. |
|
|
Cisco SD-WAN Manager Cluster: When device is deleted from UI, the NCS entry does not get cleared on all nodes |
|
|
Cisco SD-WAN Manager: Unexpected Reload when Modifying DNS Server Configuration |
|
|
For event based alarms-missing event from device breaks Alarm logic-ReferCSCwj21640 Cisco SD-WAN Manager side fix. |
|
|
Interface API Fails to Fetch Duplex State for Cisco IOS XE Catalyst SD-WAN device interfaces. |
|
|
In 20.9.5.1, deleting the Disaster Recovery is not cleaning the database and the files. |
|
|
On-Demand Tunnel is reported as down on Cisco SD-WAN Manager GUI for several hours. |
|
|
Integration Management page in UI can't populate device list intermittently : rendering issue. |
|
|
Control Policy is Programmed Incorrectly on Cisco SD-WAN Controller. |
|
|
FIS - GUI UX Slowness - CSCwh28301. |
|
|
CG522 - Data connection fails after a sim switchover. |
|
|
Cisco SD-WAN Manager: Netconf errors and slow login. |
|
|
Cisco SD-WAN Manager : HTTP proxy not using ICMP echo requests. |
|
|
Feature name description does not match feature name auto generated from color selected. |
|
|
Template pushes are taking a lot of time for scale setup. |
|
|
Cisco SD-WAN Manager : Looses the entity-ownership after upgrade. |
|
|
MT Controllers - show control connection history doesn't list org name. |
|
|
Evaluation of Cisco SD-WAN Validator for BlastRADIUS vulnerability. |
|
|
BlastRADIUS - RADIUS Protocol impact - CVE-2024-3596. |
Open Bugs for Cisco Catalyst SD-WAN Control Components Release 20.15.1
|
Identifier |
Headline |
|---|---|
|
Incorrect site deleted from sorted list Configuration > Policies > Edit Policy > Policy Application. |
|
|
DR: Scale configuration causes neo4j to crash and restart in secondary when deleting & importing SYSTEMDEVICESNODE. |
|
|
Cisco SD-WAN Manager upgrade to version 20.12.3 with 32vCPU on-prem High CPU alarms. |
|
|
WANI App lists are shown in policy compliance check. |
|
|
Server names - Asterisk is not required for custom applications. |
|
|
Cisco SD-WAN Manager template push failed config pull with "Failed to finish the task". |
|
|
Cisco SD-WAN Manager 20.15.1: MC MRF: Audit Out-of-sync and Unmapping failed. |
|
|
Cisco SD-WAN Manager 20.13.1 last-resort circuit button is not doing effect in configuration group. |
|
|
OMP extranet policy not exporting all the routes for the prefixes. |
|
|
Variable field is missing for second UCS-E blade while pushing the template. |
|
|
Wasted space in Policy Application page. |
|
|
"Change Device Values" option removed in Cisco SD-WAN Manager 20.15. |
|
|
The devices brought up with PNP when pre deployed to a config group do not receive the full configuration. |
|
|
Local User not able to login on Cisco SD-WAN Manager 20.12.3. |
|
|
Bfd events are not getting published to messaging server in cluster setup. |
|
|
Controller establishes multiple viptela-device session and affects performance. |
|
|
Viptela Platforms are not following RFC standard for command accounting. |
|
|
Fail to deploy same NFV CG with Switch parcel to different NFVIS devices. Validation Error on Switch. |
|
|
Save option greyed out when trying to edit snmp parcel. |
|
|
Cisco SD-WAN Manager 20.15 - Cisco SD-WAN Manager generates UTD container profile as low though profile is configured as high/medium ! |
|
|
Default values for variables name in configuration group aren't accepting more than 60 characters. |
|
|
DR replication fails with large configuration - Neo4j OOM on standby |
|
|
[20.12] Drop labels/nodes cause OOM on scaled setup |
Cisco Catalyst SD-WAN Control Components Compatibility Matrix and Server Recommendations
For compatibility information and server recommendations, see Cisco Catalyst SD-WAN Control Components Compatibility Matrix and Server Recommendations.
Cisco Catalyst SD-WAN Manager API
For information on Cisco SD-WAN Manager Release 20.15.x APIs, see Cisco SD-WAN Manager API.
Cisco Catalyst SD-WAN Manager GUI Changes
This section presents a summary of the significant GUI changes between Cisco Catalyst SD-WAN Manager Release 20.14.1 and Cisco Catalyst SD-WAN Manager Release 20.15.1.
-
Administration menu, Users and Access
In the Administration menu, the Manage Users menu is renamed to Users and Access.Figure 1. Administration Menu 
-
Network Hierarchy page, Multi Region Fabric (MRF) tab
On the page, the Network Settings tab is renamed to Multi Region Fabric (MRF).Figure 2. Network Hierarchy Page, Multi Region Fabric (MRF) Tab 
-
Secondary regions and subregions
On the page, it is no longer possible to create secondary regions or subregions. From this release, these are supported only through API.
Figure 3. Network Hierarchy Page 
AI Assistant on Cisco SD-WAN Manager
Minimum supported release: Cisco Catalyst SD-WAN Manager Release 20.15.1
On Cisco SD-WAN Manager, click Cisco AI Assistant. The AI assistant is available only to cloud customers. You can use this feature for the following use cases:
-
Product and Features: Provides information about Cisco Catalyst SD-WAN and the features introduced in this release.
-
Monitor Network: Provides information about the network and application health.
To enable the AI assistant feature:
-
Enable cloud services in .
-
Enter the Smart Account Credentials and click Save.
Related Documentation
Full Cisco Trademarks with Software License
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
All printed copies and duplicate soft copies of this document are considered uncontrolled. See the current online version for the latest version.
Cisco has more than 200 offices worldwide. Addresses and phone numbers are listed on the Cisco website at www.cisco.com/go/offices.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)
Feedback