Configure traffic policy | Application Priority and SLA | Cisco Catalyst SD-WAN Policy Groups Configuration Guide, Releases 26.x and Later

Guides configuration of traffic policies, enabling administrators to specify application priorities and SLA parameters for optimal network performance.

Procedure

From the Cisco SD-WAN Manager menu, choose Configuration > Policy Groups > Application priority and SLA.

Click + Application priority & SLA policy to create a policy or edit an existing policy by clicking the ellipsis icon.

Click the Advanced button on the top-right corner of the window to swtich to the advanced view.

Note

If you make changes to the application priority and SLA policies and switch to the advanced layout, the changes are retained. You cannot switch back to the default view.

Click + Add Traffic Policy to configure the traffic policy.

Table 1. Add Traffic Policy
Field	Description
Policy Name	Specify a name for the traffic policy.
VPN	Choose a VPN from the drop-down list.
Direction	Choose the direction for applying the policy: All : Bidirectional traffic flow Service : Incoming traffic from service Tunnel : Incoming traffic from tunnel

Click + Add rules to configure rules.

Table 2. Add Rules
Field	Description
Sequence	The sequence number of the rule.
Name	Specify a name for the rule.
Protocol	Choose a protocol from the drop-down list: IPv4 IPv6 Both
Match	Choose a value for the match condition from the available options. Refer to Match conditions table.
Action	Choose a value for the action to take if the policy matches, from the available options. Refer to Action conditions table.
Base Action	Choose one of the following base actions for the packets based on the rules: Accept Drop

To rearrange match–action pairs in the route policy, drag them to the desired position and click Save Match and Actions.