Procedure to send the controller serial numbers to the SD-WAN Validator.
To determine which SD-WAN Controllers in the fabric are valid, SD-WAN Validator keeps a list of the SD-WAN Controller serial numbers. SD-WAN Manager learns these serial numbers during the certificate-generation process.
Procedure
| 1. | In the Control Components tab, check the certificate status bar. If the Send to Controllers check mark is green, all serial numbers have already been sent to the SD-WAN Validator. If it is gray, you can send one or more serial numbers to the SD-WAN Validator. |
|
| 2. | Select Send to Validator in the Control Components tab. The SD-WAN Controller's serial number and the UUIDs of the validated routers are sent to the SD-WAN Validator. If all serial numbers have been sent, when you select Send to Validator, an error message is displayed. To resend an SD-WAN Controller's serial number, first select the device and then select Invalid in the Validity column. |
|
| 3. | Optionally, after the serial numbers have been sent, select the Tasks icon in the SD-WAN Manager toolbar to display a log of the file download and other recent activities. |