Invalidate a device

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

	1.	In the WAN Edge List tab, select the device to invalidate.
	2.	In the Validate column, select Invalid.
	3.	Select OK to confirm the move to the invalid state.
	4.	Repeat the steps for each device you wish to invalidate.
	5.	Select the Send to Controllers button in the upper left corner to send the chassis and serial numbers of the validated devices to the SD-WAN Controllers in the network. SD-WAN Manager shows the status of the push operation.

Procedure