Software Entitlement Commands on the Cisco ASR 9000 Series Router
- clear license
- clear license log
- license
- license add
- license backup
- license move
- license move slot
- license remove
- license restore
- license save credential
- show license
- show license active
- show license allocated
- show license available
- show license backup
- show license chassis
- show license evaluation
- show license expired
- show license features
- show license file
- show license log
- show license pools
- show license udi
- show license status
clear license
To delete all licenses from the router persistent storage, use the clear license command in administration EXEC mode.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The clear license command removes all licenses from the router persistent storage.
Task ID
clear license log
To clear the operational or administrative logs for the license system, use the clear license log command in administration EXEC mode.
Syntax Description
operational
Clears the operational logs for the license system.
administration
Clears the administration logs for the license system.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Use the clear license log command to clear either the operational or administrative logs for the license system. To view the logs, use the show license log command. The license log does not persist between reloads.
Task ID
Examples
The following example illustrates how to use the clear license log command to clear the operational logs:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# clear license log operationallicense
To configure a license to be used for specific slots or for any slots, use the license command in administration configuration mode. To remove the configuration of the license, use the no form of this command.
license feature-id [ type [ evaluation | permanent ] | location node-id ]
no license feature-id [ type [ evaluation | permanent ] | location node-id ]
Syntax Description
feature-id
Identifier for the feature.
type [evaluation | permanent]
(Optional) Specifies whether the license is evaluation or permanent.
location node-id
(Optional) Specifies the location of the card. The node-id argument is entered in the rack/slot/module notation.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
If the license command is not configured during a license acquisition, the acquisition fails. This command is required to be configured for every licensed feature starting in Cisco IOS XR Release 4.0.0.
Licenses can be optionally configured as either permanent or evaluation. If no location is specified, the license is considered a flexible license available for any location. When a specific location is configured, the feature allowed by the license is considered slot-specific and bound to specific slots only.
Task ID
license add
To add a license to a secure domain router (SDR) license pool, use the license add command in administration EXEC mode.
Syntax Description
tar
(Optional) Indicates that the license file is contained in a tar file.
license-name
Name and location of the license file to be added. The license file can be local to the system or a remote file on a TFTP server.
sdr sdr-name
(Optional) Adds the license to the specified SDR license pool. The default is owner. The sdr-name argument is the name assigned to the SDR.
Command History
Release
Modification
Release 3.9.0
This command was introduced.
Release 4.0.0
The tar keyword was added.
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Use the license add command to add a license to an SDR license pool. The license file can be local to the system or a remote file on a TFTP server. The license file is stored in persistent storage on the router.
To acquire a license file, you must provide a manufacturing supplied product authorization key (PAK) and the license unique device identifier (UDI) of the chassis to the license registration tool at: https://tools.cisco.com/SWIFT/Licensing/RegistrationServlet. To obtain the UDI of your chassis, use the show license udi command.
By default, there is one license pool available. You can create specific license pools using the license pool create command. If a license is available for a specific SDR license pool, it cannot be used in another SDR, unless it is moved from one SDR license pool to another. Use the license move command.
Task ID
Examples
The following example shows how to add a software license ito the owner SDR:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# license add disk1:/P1-LIC-8_TBA09370035_20070207195224661.lic License command "license add disk1:/P1-LIC-8_TBA09370035_20070207195224661.lic sdr Owner" completed successfully.license backup
To back up all licenses contained on the persistent storage of the router, use the license backup command in administration EXEC mode.
Syntax Description
backup-file
Name and location of the backup file to be created or modified. This can be a local file, or a remote file on a TFTP or rcp server.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Use the license backup command to back up the licenses stored in the persistent storage on the router. We recommend this so that you can restore the licenses at one time while recovering from a failed disk situation. The destination location can be local to the system; in other words, a flash disk or hard disk. Alternatively, it can be a remote file on a TFTP or rcp server. The license information includes the licenses as well as the operational information, such as the slot the licenses are allocated to and the current license operation identifier.
If the backup file already exists, you are prompted to confirm before the file is overwritten.
When licenses are backed up, they can be restored as required using the license restore command.
Task ID
Examples
The following example shows how to back up the licenses on a router:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# license backup disk1:/license_back License command "license backup disk1:/license_back" completed successfully.license move
To move a license from one secure domain router (SDR) license pool to another, use the license move command in administration EXEC mode.
license move feature-id { all | count } sdr source-sdr-name sdr dest-sdr-name [ evaluation | permanent ]
Syntax Description
feature-id
Identifier for the feature entitled in the licenses to be moved. You can display available licenses using the show license command.
all
Specifies to move all available licenses with the specific feature identifier.
count
Number of licenses to move.
sdr source-sdr-name
Specifies the SDR license pool from which to move the specified licenses. The source-sdr-name argument is the name assigned to the SDR.
sdr dest-sdr-name
Specifies the SDR license pool to which the license should be moved. The source-sdr-name argument is the name assigned to the SDR.
evaluation
Specifies to move an evaluation license.
permanent
Specifies to move a permanent license.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
By default, there is only one license pool available. If you have created multiple license pools, you can use the license move command to move the license to a different SDR license pool.
The license move command is used only to move licenses between SDR license pools on the same router. To move licenses between routers, you must first remove the license from the original router using the license remove command, and then add it to the new router using the license add command. To move licenses between routers, you also need to generate a new license key on Cisco.com. The license registration tool is located at https://tools.cisco.com/SWIFT/Licensing/RegistrationServlet.
Licenses can be moved only if they are in the available state. In other words, you have to clear the feature configuration before a license can be released back to the appropriate license pool.
Task ID
Examples
The following example shows how to move a license from one license pool to another:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# license move a9k-adv-optic-lic sdr owner sdr mysdrlicense move slot
To move a license from one slot to another, use the license move slot command in EXEC or administration EXEC mode.
license move feature-id slot [count] from { node-id | allocated } to { node-id | available } [ evaluation | permanent ]
Syntax Description
feature-id
Identifier for the feature entitled in the licenses to be moved. You can display available licenses using the show license command.
count
Number of licenses to move. This argument cannot be used in conjunction with the allocated and available keywords.
from
Specifies from where to move the specified licenses.
node-id Specific node from which to move the license.
allocated
Specifies to move all allocated licenses with the specific feature identifier. This keyword must be used in conjunction with the available keyword.
to
Specifies to where to move the specified licenses.
node-id Specific node to which to move the license.
available
Specifies to move the specified allocated licenses into the available state. This keyword must be used in conjunction with the allocated keyword.
evaluation
Specifies to move an evaluation license.
permanent
Specifies to move a permanent license.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The license move slot command moves slot-based licenses from one slot to another slot on the same router.
Use the allocated keyword to move all allocated licenses into the available state. The allocated keyword must be used in conjunction with the available keyword. If no allocated licenses are available that match the feature identifier, the license move slot command revokes used licenses on the given slot.
If licenses are going to be revoked on the source card, a warning prompt is displayed.
Licenses can be moved only if they are in the available state. In other words, you have to clear the feature configuration before a license can be released back to the appropriate license pool.
Task ID
Examples
The following example shows how to move a license from one slot to another:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# license move a9k-adv-optic-lic slot 1 from 0/1/cpu0 to 0/4/cpu0The following example shows how to move all licenses to the available state:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# license move a9k-adv-optic-lic from allocated to availablelicense remove
To remove a license permanently from a router, use the license remove command in administration EXEC mode.
license remove feature-id { id | ticket permission-ticket rehost-ticket } [ sdr sdr-name ] { evaluation | permanent }
Syntax Description
feature-id Identifier for the feature entitled in the licenses to be removed. You can display available features using the show license command.
id Specifies to remove licenses using a unique identifier of the license.
sdr sdr-name Removes the license from the specified SDR license pool.
evaluation
Specifies to move an evaluation license.
permanent
Specifies to move a permanent license.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The license remove command permanently removes a license from the router and outputs a key or rehost ticket that can be used to prove that the license has been removed. This command accepts a permission ticket, obtained from CCO, that includes the UDI, feature ID and count of licenses to remove. Refer to the license registration tool on CCO for more information: https://tools.cisco.com/SWIFT/Licensing/RegistrationServlet.
If you use a permission ticket that was previously used, the same rehost ticket is created, but no licenses are removed.
Licenses can be removed only if they are in the available state. In other words, you have to clear the feature configuration before that the license can be released back to the appropriate license pool.
Task ID
license restore
To restore the licenses on a router using an earlier backup copy, use the license restore command in administration EXEC mode.
Syntax Description
backup-file
Name and location of the backup file to be used for the license restore. This can be a local file, or a remote file on a TFTP or rcp server.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The license restore command restores the licenses on the router using an earlier backup copy that was created using the license backup command. The source location can be local to the system, in other words, a flash disk or hard disk. Alternatively, it can be a remote file on a TFTP or rcp server.
Before the licenses are restored, the license manager verifies the following:
Task ID
Examples
The following example shows how to move a license from one license pool to another:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# license restore disk1:/license_back Info: This command will erase all existing licenses. Info: It is strongly recommended to backup existing licenses first. Do you wish to proceed? [yes/no]: y License command "license restore disk1:/license_back" completed successfully.license save credential
To retreive the router credentials and save them to a specified location, use the license save credential command in administration EXEC mode.
Syntax Description
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The following device credentials are saved:
Task ID
Examples
The following example shows how to save the credentials to a file:
RP/0/RSP0/CPU0:router:router(admin)# license save credential disk1:/cred_fileThe following example shows the typical information saved to the credential file:Wed Aug 4 12:20:19.544 DST Device credentials: OPID :5 SN :FOX1232H67M PID :ASR-9010-ACshow license
To display all license information, use the show license command in EXEC or administration EXEC mode.
Syntax Description
feature-id
(Optional) Identifier for the feature entitled in the licenses to be displayed.
location node-id
(Optional) Specifies the location of the card. The node-id argument is entered in the rack/slot/module notation.
sdr sdr-name
(Optional) Displays the licenses in the specified SDR license pool. The sdr-name argument is the name assigned to the SDR.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The show license command displays all license information. Alternatively, you can display license information for a specific feature identifier, slot location, or SDR by using the available options.
If the feature process has supplied an opaque string while checking out the license, that string is displayed next to the feature identifier in the command output.
Task ID
Examples
The following example shows sample output from the show license command:
RP/0/RSP0/CPU0:router(admin)# show license Wed Aug 4 09:52:24.352 DST FeatureID: A9K-ADV-OPTIC-LIC (Slot based, Permanent) Total licenses 1 Available for use 1 Allocated to location 0 Active 0 Store name Permanent Store index 1 Pool: Owner Total licenses in pool: 1 Status: Available 1 Operational: 0 FeatureID: A9K-ADV-VIDEO-LIC (Slot based, Permanent) Total licenses 1 Available for use 1 Allocated to location 0 Active 0 Store name Permanent Store index 2 Pool: Owner Total licenses in pool: 1 Status: Available 1 Operational: 0 FeatureID: A9K-AIP-LIC-B (Slot based, Permanent) Total licenses 1 Available for use 1 Allocated to location 0 Active 0 Store name Permanent Store index 3 Pool: Owner Total licenses in pool: 1 Status: Available 1 Operational: 0 FeatureID: A9K-AIP-LIC-E (Slot based, Permanent) Total licenses 1 Available for use 1 Allocated to location 0 Active 0 Store name Permanent Store index 4 Pool: Owner Total licenses in pool: 1 Status: Available 1 Operational: 0 FeatureID: A9K-iVRF-LIC (Slot based, Permanent) Total licenses 1 Available for use 1 Allocated to location 0 Active 0 Store name Permanent Store index 5 Pool: Owner Total licenses in pool: 1 Status: Available 1 Operational: 0show license active
To display license information for all licenses that are currently checked out or being used by an application, use the show license active command in EXEC or administration EXEC mode.
Syntax Description
feature-id
(Optional) Identifier for the feature entitled in the licenses to be displayed.
location node-id
(Optional) Specifies the location of the card. The node-id argument is entered in the rack/slot/module notation.
sdr sdr-name
(Optional) Displays the licenses in the specified secure domain router (SDR) license pool. The sdr-name argument is the name assigned to the SDR.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The show license active command displays all license information regarding licenses that are currently checked out or being used by an application. You can display the information for a specific feature identifier, slot location, or SDR by using the available options.
Task ID
Examples
The following example displays sample output from the show license active command:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# show license active FeatureID: a9k-adv-optic-lic (Slot based, Implicit[Remaining time: 90 days]) Status: Active 2 SDR: Owner Operational: 2 Location: 0/1/CPU0 1 0/6/CPU0 1See Table 1 for a description of the significant fields shown in the display.
show license allocated
To display license information for all licenses allocated to a slot but not used, use the show license allocated command in EXEC or administration EXEC mode.
Syntax Description
feature-id
(Optional) Identifier for the feature entitled in the licenses to be displayed.
location node-id
(Optional) Specifies the location of the card. The node-id argument is entered in the rack/slot/module notation.
sdr sdr-name
(Optional) Displays the licenses in the specified secure domain router (SDR) license pool. The sdr-name argument is the name assigned to the SDR.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The show license allocated command displays all license information regarding licenses that are allocated to a slot but are not currently being used. You can display the information for a specific feature identifier, slot location, or SDR by using the available options.
Task ID
Examples
The following example displays sample output from the show license allocated command:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# show license allocated FeatureID: A9K-ADV-OPTIC-LIC (Slot based, Permanent) Status: Allocated 1 SDR: Owner Status: Operational: 1 Locations with licenses: (Active/Allocated) 0/1/CPU0 (0/1)See Table 1 for a description of the significant fields shown in the display.
show license available
To display all licenses that are not currently in use or allocated to specific slots, use the show license available command in EXEC or administration EXEC mode.
Syntax Description
feature-id
Identifier for the feature entitled in the licenses to be displayed.
location node-id
Specifies the location of the card. The node-id argument is entered in the rack/slot/module notation.
sdr sdr-name
Displays the licenses in the specified secure domain router (SDR) license pool. The sdr-name argument is the name assigned to the SDR.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The show license available command displays all licenses that currently are not being used or allocated to a specific slot. You can display only licenses with a specific feature identifier, slot location, or SDR by using the available options.
Task ID
Examples
The following example displays sample output from the show license available command with only implicit licenses available:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# show license available FeatureID: A9K-ADV-OPTIC-LIC (Slot based, Implicit[Remaining time: 90 days]) Status: Available 0 SDR: Owner Status: Available 0 Location: 0/1/CPU0 1 0/6/CPU0 1The following example displays sample output from the show license available command with permanent licenses installed:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# show license available FeatureID: A9K-ADV-OPTIC-LIC (Slot based, Permanent) Status: Available 7 SDR: Owner Status: Available 7See Table 1 for a description of the significant fields shown in the display.
show license backup
To display the backup license file, use the show license backup command in administration EXEC mode.
Syntax Description
Command History
Release
Modification
Release 3.9.0
This command was introduced.
Release 4.0.0
Command output was changed.
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The show license backup command displays the UDI information and license summary of a backup database, so that you can confirm the contents of a particular backup file before restoring it. Create the backup license file using the license backup command. Restore licenses from a backup using the license restore command.
Task ID
Examples
The following example shows sample output from the show license backup command:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# show license backup disk0:/lic_backup.pkg Tue Jul 27 17:12:44.982 pst Local Chassis UDI Information: S/N : FOX1316G5TL Operation ID: 9 FeatureID: A9K-ADV-OPTIC-LIC (Slot based, Permanent) Total licenses 1 Pool: Owner 1 Allocated Node(s): 0/0/CPU0 1 [Owner] FeatureID: A9K-ADV-VIDEO-LIC (Slot based, Evaluation) Total licenses 1 Pool: Owner 1 Allocated Node(s): 0/RSP0/CPU0 1 [Owner] FeatureID: A9K-AIP-LIC-B (Slot based, Permanent) Total licenses 2 Pool: Owner 2 Allocated Node(s): 0/6/CPU0 1 [Owner] 0/1/CPU0 1 [Owner] FeatureID: A9K-AIP-LIC-E (Slot based, Permanent) Total licenses 2 Pool: Owner 2 Allocated Node(s): 0/4/CPU0 1 [Owner] FeatureID: A9K-iVRF-LIC (Slot based, Permanent) Total licenses 1 Pool: Owner 1 FeatureID: A9K-iVRF-LIC (Slot based, Evaluation) Total licenses 3 Pool: Owner 3 Allocated Node(s): 0/1/CPU0 1 [Owner]describes the significant fields shown in the display.
Table 2 show license backup Field Descriptions Field
Description
S/N
Chassis serial number.
Operation ID
License operation ID number. The license operation ID is incremented by the license manager every time there is a successful license add or remove operation.
FeatureID
Feature to which the licenses apply.
Type
Type of license: slot-based or chassis-based; permanent, evaluation, or implicit.
#installed
Number of such licenses installed.
show license chassis
To display all licenses with their serial number information, use the show license chassis command in administration EXEC mode.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Task ID
show license evaluation
To display information about any evaluation licenses currently allocated, available, or in use, use the show license evaluation command in EXEC or administration EXEC mode.
Syntax Description
feature-id
(Optional) Identifier for the feature entitled in the licenses to be displayed.
location node-id
(Optional) Specifies the location of the card. The node-id argument is entered in the rack/slot/module notation.
sdr sdr-name
(Optional) Displays the licenses in the specified secure domain router (SDR) license pool. The sdr-name argument is the name assigned to the SDR.
Command History
Release
Modification
Release 3.9.0
This command was introduced.
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The show license evaluation command displays information regarding any evaluation licenses that are currently allocated, available, or in use, including the number of days left until they expire. You can display the information for a specific feature identifier, slot location, or SDR by using the available options.
Task ID
Examples
The following example displays sample output from the show license evaluation command:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# show license evaluation FeatureID: XC-L3VPN (Non slot based, Evaluation[Valid]) Valid for 2day(s) from 15:13:16 Nov 17 2006 Remaining time: 1 day(s) 21:07:46 Status: Available 6 Allocated 0 Active 0 SDR: Owner Status: Available 6 Operational: 0See Table 1 for a description of the significant fields shown in the display.
show license expired
To display information regarding evaluation licenses that have expired, use the show license expired command in EXEC or administration EXEC mode.
Syntax Description
feature-id
(Optional) Identifier for the feature entitled in the licenses to be displayed.
location node-id
(Optional) Specifies the location of the card. The node-id argument is entered in the rack/slot/module notation.
sdr sdr-name
(Optional) Displays the licenses in the specified secure domain router (SDR) license pool. The sdr-name argument is the name assigned to the SDR.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The show license expired command displays information regarding evaluation licenses that have expired. You can display the information for a specific feature identifier, slot location, or SDR by using the available options.
Task ID
Examples
The following example displays sample output from the show license expired command:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# show license expired FeatureID: XC-L3VPN (Non slot based, Evaluation[Expired]) Status: Available 6 Allocated 0 Active 0 SDR: Owner Status: Available 6 Operational: 0See Table 1 for a description of the significant fields shown in the display.
show license features
To display all features that can be licensed on the router, use the show license features command in administration EXEC mode.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Task ID
show license file
To display all the XML license files that have been added to a router, use the show license file command in administration EXEC mode.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Task ID
Examples
The following example shows sample output from the show license file command:
RP/0/RSP0/CPU0:router(admin)# show license file Wed Aug 4 03:01:53.506 DST License File Info: Store Name: Permanent Store Index: 1 License Line:11 A9K-ADV-OPTIC-LIC 3.9 LONG NORMAL STANDALONE EXCL 1_KEYS INFINITE_KEYS NEVER NEVER NiL SLM_CODE CL_ND_LCK NiL *14BFZ88N4WTJ7GU400 NiL NiL NiL 5_MINS <UDI><PID>ASR-9010-AC</PID><SN>FOX1232H67M</SN></UDI><SEQ>0</SEQ> q:1jK6WAOl4od1xDXWnQ3J6xDiU1o1aCgQLgCXrnqsLmnGFo78DkiH9E0GWQzabIVe4jB9EUrAe5u: N8eDRPXcfZjGwcgBECfKU4OPobqbfQVkeVa:LRYQG2poKwPPHYaRVym0MMluk7n46Awe6GZJcBLX Store Name: Permanent Store Index: 2 License Line:11 A9K-ADV-VIDEO-LIC 3.9 LONG NORMAL STANDALONE EXCL 1_KEYS INFINITE_KEYS NEVER NEVER NiL SLM_CODE CL_ND_LCK NiL *14BFZ88N4WTJ7GU400 NiL NiL NiL 5_MINS <UDI><PID>ASR-9010-AC</PID><SN>FOX1232H67M</SN></UDI><SEQ>1</SEQ> ,WGrW73h2JqIhAwAt6dQVhKICQaivZh:eW4ZYJ2c6wLlE1ln0f9eEsU2hwv6V1KKLRo0S2AeLSrBp85nJLO 8yCVmzUnQrCYojSFHAcpu2aRmfFVxR1BNBMUf7Ik,Urcg16fMaLQc58X0JFUpwM86Hkz2LV Store Name: Permanent Store Index: 3 License Line:11 A9K-AIP-LIC-B 3.9 LONG NORMAL STANDALONE EXCL 1_KEYS INFINITE_KEYS NEVER NEVER NiL SLM_CODE CL_ND_LCK NiL *14BFZ88N4WTJ7GU400 NiL NiL NiL 5_MINS <UDI><PID>ASR-9010-AC</PID><SN>FOX1232H67M</SN></UDI><SEQ>2</SEQ> 7:Pr2QJwiHdoYnhjRPs13i09kpWOj: ,sNex7JziswOf7A9IDCzuZ48e4qRl4QSFELOQHlwT6rfWUbKt4Yt,OoXV876r1M:3APZS4pPxzNQd03NWVak0HP, YZq7jRh8H,HEVwf2FrNcwqEpVdEpkS4tiufs Store Name: Permanent Store Index: 4 License Line:11 A9K-AIP-LIC-E 3.9 LONG NORMAL STANDALONE EXCL 1_KEYS INFINITE_KEYS NEVER NEVER NiL SLM_CODE CL_ND_LCK NiL *14BFZ88N4WTJ7GU400 NiL NiL NiL 5_MINS <UDI><PID>ASR-9010-AC</PID><SN>FOX1232H67M</SN></UDI><SEQ>3</SEQ> F44b2Phw6KdqjSnFPU, QL7oJjk9q1syjp1XuD3wZBGfDb0TsUx:QPDKx5ee:xrbOf7ib,OxtDNojwpFbdGMQt8VoO2sAkpaK7ezSyVD:I: 46VvFYd4:WsO87aa8kVgRJGM3RsixQ1tiKk7deWfIygtlofr Store Name: Permanent Store Index: 5 License Line:11 A9K-iVRF-LIC 3.9 LONG NORMAL STANDALONE EXCL 1_KEYS INFINITE_KEYS NEVER NEVER NiL SLM_CODE CL_ND_LCK NiL *14BFZ88N4WTJ7GU400 NiL NiL NiL 5_MINS <UDI><PID>ASR-9010-AC</PID><SN>FOX1232H67M</SN></UDI><SEQ>4</SEQ> oYkhxBsT:bmcqh3CU9EbLb, 1LKLtOknjPwjf7k83X7f0Xy:DZflBXjgnTozUn7FCf0Jaya9L81hhhS73k4AtrtVOsKvDmh7EdGWAu2WI78E3VnEfZka: uSHTBxhNpQ1Blpf0qj5UTH8QxLz6psFsi,KwVdshow license log
To display the operational or administrative logs for the license system, use the show license log command in EXEC or administration EXEC mode.
Syntax Description
operational
Displays the operational logs for the license system.
administration
Displays the administration logs for the license system.
request-id
Identifier of a particular log entry.
feature-id
Identifier for the feature entitled in the licenses to be displayed.
sdr sdr-name
Displays the licenses in the specified secure domain router (SDR) license pool. The sdr-name argument is the name assigned to the SDR.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The show license log command displays the operational or administrative logs for the license system. The administrative log displays all licenses that are added, removed, or moved along with a timestamp and username of the person who initiated the request. This log persists across reloads. The operation log displays when a license was checked out or released by a feature. The license release can be done by the license manager if it detects that the feature is not responding. This log does not persist between reloads.
You can display license information for a specific feature identifier or SDR by using the available options.
Task ID
Examples
The following example displays sample output from the show license log command:
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# show license log operational #ID :SDR :FeatureID :NodeID :Time: Log 1 :Owner : A9K-ADV-OPTIC-LIC :0/6/CPU0 :Tue Feb 6 21:33:16 2007: license_acquire: opaque_string , result(No error) 2 :Owner : A9K-ADV-OPTIC-LIC :0/1/CPU0 :Tue Feb 6 21:33:16 2007: license_acquire: opaque_string , result(No error)See Table 1 for a description of the significant fields shown in the display.
show license pools
To display the currently configured set of license pools, use the show license pools command in administration EXEC mode.
Syntax Description
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The show license pools command displays all license pools, and the features that are enabled with the licenses in each pool. By default, all licenses are contained in the owner SDR pool. If you have created SDR license pools with the license pool create command, you can place licenses in separate pools.
Task ID
Examples
The following example displays sample output from the show license pools command. In this example, the owner SDR has both 40-Gbps and Layer_3 VPN licenses, while the SDR sdr2 has only 40-Gbps licenses.
RP/0/RSP0/CPU0:router# admin RP/0/RSP0/CPU0:router(admin)# show license pools Pool Name Feature ============================================== Owner A9K-ADV-OPTIC-LICdescribes the significant fields shown in the display.
show license udi
To display unique device identifier (UDI) information for the router, use the show license udi command in administration EXEC mode.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
The show license udi command displays the complete UDI of the router to which any license is associated. The UDI comprises the chassis serial number, along with a license operation ID number. The UDI is used to acquire a license file using the license registration tool on CCO. The license tool is located at https://tools.cisco.com/SWIFT/Licensing/RegistrationServlet?.
Task ID
show license status
To display the status of all relevant licenses, use the show license status command in administration EXEC mode.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Task ID
Examples
The following example shows output from the show license status command:
RP/0/RSP0/CPU0:router(admin)# show license status Sun Jul 18 05:25:09.855 DST License Type Supported permanent Non-expiring node-locked licenses evaluation Expiring node-locked licenses License Operation Supported add Add license file to the system backup Backup License move Move licenses pool License pool creation remove Remove license file restore Restore backedup licenses Device Status Device Credential type: IMAGE Device Credential Verification: PASS Rehost Type: Hardware