Specifies the high-level steps to setup secure boot in ESXi environment.
This task specifies the high-level steps to setup secure boot in ESXi environment.
Procedure
The VNF boots up securely.
Cisco Catalyst 8000V Edge Software Installation And Configuration Guide
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Cisco Catalyst 8000V Edge Software Installation And Configuration Guide
Updated: April 24, 2026
Want to summarize with AI?
Log inSpecifies the high-level steps to setup secure boot in ESXi environment.
This task specifies the high-level steps to setup secure boot in ESXi environment.
Create VM using ESXi 6.5 or later version using VM version 13 through 19. To choose the EFI firmware mode, navigate to VM Options > Boot Options > Firmware > EFI.
NoteIf you require VM version greater than 19, first boot the C8000V with secure boot using ESXi version 19 or earlier. After the router boots successfully, use vCenter to upgrade the VM compatibility to the required version.
Power down the VM after the initial boot and the IOS prompt is complete.
Enable the EFI secure boot by navigating to Edit Settings > VM Options > Boot Options > Secure Boot.
Power up the VM.
You cannot modify the firmware mode (from BIOS to EFI or vice versa) after you create the VM.
The VNF boots up securely.
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.