- Preface
- Cisco NCS Documentation Roadmap
- New and Changed Information
- Setting Up Optical Service Channel Cards
- Provisioning Optical Amplifier Cards
- Provisioning Multiplexer and Demultiplexer Cards
- Setting Up Tunable Dispersion Compensating Units
- Provisioning Protection Switching Module
- Provisioning Reconfigurable Optical Add/Drop Cards
- Provisioning Transponder and Muxponder Cards
- Configuring GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Cards Using PCLI
- Pseudo Command Line Interface Reference
- Card Features
- Card Specifications
- Administrative and Service States
- SNMP
- CTC Enhancements, Operations, and Shortcuts
- Network Element Defaults
- Index
Cisco NCS 2000 Series Line Card Configuration Guide, Release 11.x.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- February 13, 2024
Chapter: Network Element Defaults
Network Element Defaults
The information in this chapter is in a new location. See Network Element Defaults for information related to factory-configured (default) network element (NE) settings.
Feedback