Configuration Guide for Cisco NCS 1014, IOS XR Releases 25.x.x
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Configuration Guide for Cisco NCS 1014, IOS XR Releases 25.x.x
Updated: October 7, 2026
Explains how amplifier APCs automatically control and stabilize output power in optical networks to ensure consistent signal performance and network reliability.
This chapter describes amplifier APC.
This section explains how Amplifier Automatic Power Control (APC) stabilizes optical power in optical fiber links by compensating for span loss variations.
Use this procedure to configure the fiber type for an optical line controller using CLI commands.
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.