New and Changed Information
|
Feature |
Description |
Changed in Release |
Where Documented |
|---|---|---|---|
|
VXLAN and iVXLAN Strip |
VXLAN and iVXLAN strip is supported on N9K-C93180YC-FX3 and N9K-C93108TC-FX3P |
10.2(3)F |
|
|
NDB: Co-existence of MPLS Stripping, ERSPAN and other header stripping features |
The NDB MPLS Header Stripping feature allows for stripping of MPLS header from packets that come in with an MPLS encapsulation. This feature uses the OFM model and co-exists with the other header stripping features. |
10.2(3)F |
Guidelines and Limitations for MPLS Stripping Header Stripping for Nexus Data Broker |
|
Correctly Advertise LLDP Chassis-ID |
Introduced a new global configuration command—[no] lldp chassis-id switch—to advertise the switch chassis MAC address instead of the port MAC address. |
10.2(3)F |
|
|
Authenticated SMTP Support From NX-OS for Smart Call Home |
SMTP-AUTH is supported for secure callhome mail transfer on Cisco Nexus 9000 Series platform switches |
10.2(3)F |
|
|
IPv6 ERSPAN Destination support |
Added support for IPv6 ERSPAN destination/termination |
10.2(3)F |
|
|
sFlow flow-cache size increase |
Added support for 30k v4 and 30k v6 bgp routes. |
10.2(3)F |
|
|
PTP Support of up to 2000 secondary devices per switch |
Added support for a maximum of 100 secondary devices per port, with a system-wide maximum of 2000 secondary devices per switch. |
10.2(3)F |
|
|
Enhancement on the config diff utility |
New CLIs to support Integrity Checking of Candidate Config. |
10.2(3)F |
|
|
LLDP Egress Queuing TLV on NPV and SAN Switching Modes |
Introduced a new command—[no] lldp tlv-select dcbxp egress-queuing—to advertise egress queuing configuration in the switch. |
10.2(3)F |
Configure DCBXP Egress Queuing |
| FC span for NPV and SAN Switching Modes |
Added packet capture support for FC ports, SAN port channels, and VSANs. |
10.2(3)F |
|
|
Logging 2.0 Enhancements: Log profile yaml file and Global Dictionary per Log statistics |
Added support for Log-Profile YAML file and CLI to display per log statistics of each component. |
10.2(3)F |
|
|
SPAN-to-CPU |
Added ACL filter support for Cisco Nexus N9K-X9624D-R2 line card. |
10.2(3)F |
|
|
EoMPLS Label Stripping |
Added support for EoMPLS only on Cisco Nexus 9300-EX platform switches |
10.2(2)F |
|
|
Disable Security and SNMP User Synchronization |
Added a new CLI that allows you to disable the user synchronization between the SNMP and security components. |
10.2(2)F |
|
|
Secure Erase |
Added support for Nexus 9000 Series to remove all the identifiable customer information on Cisco NX-OS devices in conditions of product removal due to Return Merchandise Authorization (RMA), or upgrade or replacement, or system end-of-life. |
10.2(2)F |
|
|
SPAN-to-CPU |
SPAN-to-CPU is for troubleshooting packet flow through Cisco Nexus 9000 Series switches. |
10.2(2)F |
|
|
NDB GRE Header Stripping |
Allows you to strip the GRE header from packets that come in with a GRE encapsulation. |
10.2(2)F |
|
|
Logging 2.0 Enhancements: Auto-Collect Adoption Improvement |
Allows for creation and deletion of default YAML file with pre-populated settings. |
10.2(2)F |
|
|
PTP v1 and v2 Co-existence |
Added support for PTPv1 and v2 co-existence on Cisco Nexus 9300-GX, 9300-GX2, and 9300-FX3 platform switches. |
10.2(2)F |
|
|
Terminal-lock for VSH sessions Phase 2 |
Added a new CLI "terminal lock mdp" that locks the Model Driven Programmability interfaces and supports DME lock sessions. |
10.2(2)F |
|
|
PTP with jitter fix for 1G ports |
Added support for PTP with jitter fix for 1G ports on Cisco N9K-C93108TC-FX3P platform switches. |
10.2(2)F |
|
|
PTP: IPv6 UDP Unicast Transport and PTP Unicast Negotiation |
Added support for PTP IPv6 transport on the Cisco Nexus 9300-FX, 9300-FX2, 9300-GX, and 9300-GX2 platform switches. Added support for PTP unicast negotiation on Cisco Nexus 9300-EX, 9300-FX, 9300-FX2, 9300-GX, and 9300-GX2 platform switches. |
10.2(2)F |
|
|
sFlow |
Added support for sFlow on Cisco N9K-C9332D-GX2B platform switches. |
10.2(1q)F |
|
|
PTP |
Added support for PTP on Cisco N9K-C9332D-GX2B platform switches. |
10.2(1q)F |
|
|
SPAN |
Added support for SPAN on Cisco N9K-C9332D-GX2B platform switches. |
10.2(1q)F |
|
|
Configuring in Two-Stage Configuration Commit Mode |
Added new CLIs |
10.2(1)F |
|
|
sFlow BGP Extension |
Added support for Cisco Nexus switches. |
10.2(1)F |
|
|
Terminal lock for VSH Sessions |
Added support for Cisco Nexus switches. |
10.2(1)F |
|
|
NDB: Optimise ERSPAN implementation |
Added support for ERSPAN header stripping Cisco Nexus 9300-FX2, 9300-FX3, 9300-GX, and 9300-GX2 platform switches. Note that this feature is only supported on TOR switches. |
10.2(1)F |
|
|
L3 NetFlow export on L2 physical interface |
Added support for Layer 3 NetFlow on Layer 2 interfaces on Cisco Nexus 9300-EX, 9300-FX, 9300-FX2, 9300-FX3, 9300-GX, and 9300-GX2 platform switches, and on 9500-EX LC and 9500-FX LC. |
10.2(1)F |
|
|
ERSPAN over IPv6 |
Added support for ERSPAN over IPv6 on Cisco Nexus 9300-GX2, 9300-GX, 9300-FX2, 9300-EX, 9300-FX3, 9300-FX3S, and 9300-FX3P platform switches and N9K-X9716D-GX, N9K-X9736C-EX, N9K-X9732C-EX(X86_64 Atom), N9K-X9732C-EXM, N9K-X97160YC-EX, and N9K-X9736C-FX line cards. |
10.2(1)F |
|
|
NDB license - tap-agg |
Tap aggregation is a licensed feature that requires you to configure feature tap-aggregation so that you can configure the tap aggregation-related CLIs. This feature is supported on all Cisco Nexus 9000 series platform switches. |
10.2(1)F |
Guidelines and Limitations for TAP Aggregation |
|
PTP Telecom Profile |
This feature adds IPv4, IPv6, and Class B support for PTP Telecom Profile. |
10.2(1)F |
|
|
Terminal-lock for VSH Sessions |
This feature provides CLIs to lock the terminal to allow one user to access the configure terminal commands. It prevents other users from changing the NX-OS running configuration. |
10.2(1)F |
|
|
sFlow BGP Extension |
This feature adds configuring sFlow Extended BGP (Gateway) to the switch. |
10.2(1)F |
|
|
No-Reload Option for SMU Installation |
This feature provides No-Reload option payloads for SMU installation. |
10.2(1)F |
Feedback