- Preface
- New and Changed Information
- Overview
- Two-stage Configuration Commit
- Configuring Switch Profiles
- Configuring Frequency Synchronization
- Precision Time Protocol
- Configuring NTP
- Configuring CDP
- Configuring System Message Logging
- Configuring Smart Call Home
- Configuring Session Manager
- Configuring the Scheduler
- Simple Network Management Protocol
- Configuring RMON
- Configuring Online Diagnostics
- Configuring the Embedded Event Manager
- Terminal Lock for VSH Sessions
- Configuring Onboard Failure Logging
- Switched Port Analyzer
- Configuring ERSPAN
- Configuring LLDP
- Configuring NetFlow
- Configuring sFlow
- Configuring TAP Aggregation and MPLS Stripping
- Configuring MPLS Access Lists
- Configuring Header Stripping Features for Nexus Data Broker
- Configuring Graceful Insertion and Removal
- Performing Software Maintenance Upgrades
- Performing Configuration Replace
- Configuring Rollback
- Integrity Check of Candidate Config
- Performing Secure Erase
- IETF RFCs supported by Cisco NX-OS System Management
- Embedded Event Manager System Events and Configuration Examples
- Configuration Limits for Cisco NX-OS System Management
- Index
Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 10.2(x)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- February 16, 2024
Feedback