Cisco Nexus 3000 Series NX-OS Release Notes, Release 10.4(1)F

Available Languages

Download Options

  • PDF
    (187.2 KB)
    View with Adobe Reader on a variety of devices
Updated:August 17, 2023

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Available Languages

Download Options

  • PDF
    (187.2 KB)
    View with Adobe Reader on a variety of devices
Updated:August 17, 2023
 

 

 

Introduction

The Cisco Nexus 3000 Series NX-OS Release Notes document describes the features, issues, and exceptions of Cisco NX-OS Release 10.4(1)F software for use on Cisco Nexus 3500 and 3600 Series switches.

Note: The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product.

Changes to this document:

Date

Description

August 18, 2023

Cisco NX-OS Release 10.4(1)F became available.

New and Enhanced Software Features

New Features

Product Impact

Feature

Description

Security

Radius over DTLS Support

Datagram Transport Layer Security (DTLS) protocol is now used to  transport RADIUS datagrams over a secure channel using UDP.

See Cisco Nexus 3600 NX-OS Security Configuration Guide, Release 10.4(x).

Support ARP response for out-of-subnet

With Cisco NX-OS Release 10.4(1)F, you can enable or disable the ARP out-of-subnet packet transaction on the connected host using the ip arp outside-subnet command. This command is available in both global and interface modes.

See Cisco Nexus 3600 Series NX-OS Unicast Routing Configuration Guide, Release 10.4(x).

The enhanced features listed below are existing features introduced in earlier releases but enhanced to support new platforms in Cisco NX-OS Release 10.4(1)F for Cisco Nexus 3000 series.

Enhanced Features

Product Impact

Feature

Description

Security

Keychain support for OSPFv3

A new option to enable keychain is provided for OSPFv3 encryption and authentication commands.

See Cisco Nexus 3600 Switch NX-OS Unicast Routing Configuration Guide, Release 10.4(x), and Cisco Nexus 3000 and 9000 Series NX-API REST SDK User Guide and API Reference for Release 10.4x.

Hardware Features

Cisco NX-OS Release 10.4(1)F does not include any new hardware for the Cisco Nexus 3000 Series.

Release Image

Cisco Nexus 3000 Series platforms support only 64-bit image. The 64-bit Cisco NX-OS image filename begins with "nxos64-msll” (for example, nxos64-msll.10.4.1.F.bin) and this image is supported on Cisco Nexus 3600 series fixed switches and Cisco Nexus 3500-XL series witches. 32-bit image is no longer supported.

 

Open Issues

Bug ID

Description

CSCwe67479

Headline: Cisco Nexus 3500 switch does not propagate correct PTP clock received from upstream to downstream devices.

Symptoms: PTP clients receive incorrect clock information from Cisco Nexus 3500 switch that is working as a BC device.

Workarounds: None.

Resolved Issues

Bug ID

Description

CSCwd75851

Headline: /nxos/xlog is filled 100% with repeated copy run start and log files are not rolled over.

Symptoms: When configuration changes are automated and multiple sessions try to save the configuration changes simultaneously and repeatedly, a syslog is seen.

Workarounds: Avoid simultaneous configuration sessions and excessive/repeated config save operation.

CSCwh00127

Headline: Kernel Panic due to HR Timeout and SMC.

Symptoms: The following kernel panic logs are seen on N3K-C3548P-XL.
$ %KERN-0-SYSTEM_MSG: [11269926.144849] NMI watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [swapper/2:0] – kernel
%KERN-0-SYSTEM_MSG: [11269926.144869] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] – kernel

VDC-1 %$ %VPC-2-PEER_KEEP_ALIVE_RECV_FAIL: In domain 1, VPC peer keep-alive receive has failed
VDC-1 %$ %KERN-0-SYSTEM_MSG: [11269926.144849] NMI watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [swapper/2:0] – kernel
VDC-1 %$ %KERN-0-SYSTEM_MSG: [11269926.144869] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] – kernel
VDC-1 %$ %KERN-0-SYSTEM_MSG: [11269926.148346] nxos_panic: Kernel panic - not syncing: softlockup: hung tasks – kernel
VDC-1 %$ %KERN-0-SYSTEM_MSG: [11269926.148415] ttyS console device is disabled – kernel
VDC-1 %$ %KERN-0-SYSTEM_MSG: [11269926.150327] END: PANIC REPORT GENERATED AT 1689769096 - kernel

Workarounds: None.

Device Hardware

The following tables list the Cisco Nexus 3500 and Cisco Nexus 3600 Series hardware that Cisco NX-OS Release 10.4(1)F supports. For additional information about the supported hardware, see the Hardware Installation Guide for your Cisco Nexus 3500 and Cisco Nexus 3600 Series devices.

Cisco Nexus 3500 Switches

Product ID

Description

N3K-C3524P-XL

Cisco Nexus 3524-XL switch

N3K-C3548P-XL

Cisco Nexus 3548-XL switch

Cisco Nexus 3500 Series Fans, Fan Trays, and Power Supplies

Product ID

Description

N2200-PAC-400W

Cisco Nexus 2000 or 3000 400W AC power supply, forward airflow (port side exhaust)

N2200-PAC-400W-B

Cisco Nexus 2000 or 3000 400W AC power supply, reverse airflow (port side intake)

N2200-PDC-400W

Cisco Nexus 2000 or 3000 400W DC power supply, forward airflow (port side exhaust)

N3K-PDC-350W-B

Cisco Nexus 2000 or 3000 350W DC power supply, reverse airflow (port side intake)

NXA-FAN-30CFM-B

Cisco Nexus 2000 or 3000 individual fan, reverse airflow (port side intake)

NXA-FAN-30CFM-F

Cisco Nexus 2000 or 3000 individual fan, forward airflow (port side exhaust)

Cisco Nexus 3600 Switches

Product ID

Description

N3K-C3636C-R

The Cisco Nexus 3636C-R is a 1 rack unit (RU) switch with 36 100-Gigabit QSFP28 ports, 40-Gigabit QSFP, 2 management ports, 1 console port, and 1 USB port. The switch supports both port-side exhaust and port-side intake airflow schemes. The switch has two power supplies, one for operations and the other for redundancy. Both power supplies must be either AC power supplies or DC power supplies.

N3K-C36180YC-R

The Cisco Nexus 36180YC-R is a 1 rack unit (RU) switch with 48 1/10/25-Gigabit SFP ports and 6 40Gigabit QSFP/100-Gigabit QSFP28 ports, 1 management port, 1 console port, and 1 USB port. The switch supports both port-side exhaust and port-side intake airflow schemes. The switch has two power supplies, one for operations and the other for redundancy. Both power supplies must be either AC power supplies or DC power supplies.

From Cisco NX-OS Release 10.3(3)F, the following AC ports are supported on Cisco Nexus 36180YC-R (N3K-C36180YC-R):

AC port-side exhaust (NXA-PAC-750W-PE)

AC port-side intake (NXA-PAC-750W-PI)

The following table provides information about spares support:

Minimum/Maximum

Port-side-Intake

Port-side-Exhaust

Fan Speed %

Fan Speed %

Typical/Minimum

50%

70%

Maximum

100%

100%

For information about N3K-C36180YC-R, see Cisco Nexus 3600 Hardware Installation Guide.

Upgrade and Downgrade

To perform a software upgrade or downgrade, follow the instructions in the Cisco Nexus 3500 Series NX-OS Software Upgrade and Downgrade Guide and Cisco Nexus 3600 Series NX-OS Software Upgrade and Downgrade Guide.

For information about an In Service Software Upgrade (ISSU), see the Cisco NX-OS ISSU Support Matrix.

MIB Support

The Cisco Management Information Base (MIB) list includes Cisco proprietary MIBs and many other Internet Engineering Task Force (IETF) standard MIBs. These standard MIBs are defined in Requests for Comments (RFCs). To find specific MIB information, you must examine the Cisco proprietary MIB structure and related IETF-standard MIBs supported by the Cisco Nexus 3000 Series switch. The MIB Support List is available at the following FTP sites:

ftp://ftp.cisco.com/pub/mibs/supportlists/nexus3000/Nexus3000MIBSupportList.html

Optics

To determine which transceivers and cables are supported by Cisco Nexus 3000 Series switches, see the Transceiver Module (TMG) Compatibility Matrix.

To see the transceiver specifications and installation information, see Install and Upgrade Guides.

Related Content

This document describes and provides links to the user documentation available for Cisco Nexus 3000 Series documentation. To find a document online, use one of the links in this section.

Document Title

Description

Cisco Nexus 3000 Series switch documentation

Cisco Nexus 3000 Series documentation

Cisco NX-OS Software Strategy and Lifecycle Guide

Cisco NX-OS Software Release and Image-naming Convention

Cisco Nexus 3000 and 9000 Series NXAPI REST SDK User Guide and API Reference

Cisco Nexus 3000 and 9000 Series NX-API REST SDK User Guide and API Reference

    Cisco NX-OS Licensing Guide

    Cisco Nexus 9000 and 3000 Series NX-OS Switch License Navigator

    Cisco Nexus Smart Licensing Using Policy User Guide

Licensing Information

Documentation Feedback

To provide technical feedback on this document, or to report an error or omission, please send your comments to nexus9k-docfeedback@cisco.com. We appreciate your feedback.

Legal Information

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company (1721R).

Any Internet Protocol (IP) addresses, and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2023 Cisco Systems, Inc. All rights reserved.

Learn more