System Specifications

Environmental Specifications

Environment

Specification

Temperature

Ambient operating temperature

32 to 104°F (0 to 40°C)

Ambient nonoperating

–40 to 158°F (–40 to 70°C)

Relative humidity

Operating

5 to 90%

Nonoperating

5 to 95%

Altitude

Altitude rating is 10,000 ft (3048 m). For China, it is 6,562 ft (2000 m).

Switch Dimensions

Switch

Width

Depth

Height

Cisco Nexus 9332D-GX2B

17.3 inches (43.9 cm)

23.9 in (60.8 cm)

1.72 inches (4.4 cm) (1 RU)

Switch and Module Weights and Quantities

Component

Weight per Unit

Quantity

Cisco Nexus 9332D-GX2B Chassis (N9K-C9332D-GX2B)

28 lb (12.7 kg)

1

Fan Module

– Port-side exhaust (blue) (NXA-SFAN-35CFM-PE)

– Port-side intake (burgundy) (NXA-SFAN-35CFM-PI)

—

0.26 lb (0.12 kg)

6

Power Supplies

– 1500-W AC port-side exhaust (blue) (NXA-PAC-1500W-PE)

– 1500-W AC port-side intake (burgundy) (NXA-PAC-1500W-PI)

– 1100-W DC port-side intake (burgundy) (NXA-PDC-1100W-PI)

—

2.64 (1.2 kg)

2 (1 for operations and 1 for redundancy)

Switch Power Input Requirements

This table lists the typical amount of power that the switch consumes. It also lists the maximum amount of power that you must provision for the switch and power supply for peak conditions.


Note

Some power supplies have capabilities that are greater than the maximum power requirements for a switch. To determine the power consumption characteristics for the switch, use the typical and maximum requirements that are listed here.

Switch Typical Power Consumption (AC or DC) Maximum Power Consumption (AC or DC) Heat Dissipation Requirement

Cisco Nexus 9332D-GX2B

638 W

1442 W

4,920.308 BTUs per hour

Power Specifications

Power specifications include the specifications for each type of power supply module.

1100-W DC Power Supply Specifications

These specifications apply to these power supplies:

  • NXA-PDC-1100W-PE

  • NXA-PDC-1100W-PI

Property Specification

Input voltage Range

-40 to -72 VDC

Input Frequency

50 to 60 Hz

Efficiency

94% at 50% load

Output Power

1100 W at rated input voltage

Redundancy Modes

n + 1, 1 + 1

RoHS Compliance

Yes

Hot Swappable

Yes

1500-W AC Power Supply Specifications

These specifications apply to 1500-W power supplies:

Characteristic Specification

AC input voltage

100 to 120 VAC or

200 to 240 VAC

AC input frequency

50/60 Hz

AC input current

10 A (100 - 120 VAC)

7 A (200 - 240 VAC)

Maximum output power per power supply

1500 W

Power supply output voltage

12 V

Power supply standby voltage

3.3 V

Efficiency rating

Climate Savers Platinum Efficiency (80Plus Platinum certified)

Form factor

1.75x2.15x13.13

Power Cable Specifications

These sections show the power cables that you can order and use with this switch.

Power Cables for NXA-PAC-1500W Power Supplies

Cable

Description

Length

Weight

CAB-250V-10A-AR

Power Cord, 250VAC 10A IRAM 2073 Plug, Argentina

8.2 feet (2.5 m)

0.32 kg

CAB-9K10A-EU

Power Cord, 250VAC 10A CEE 7/7 Plug, EU

8.2 feet (2.5 m)

0.30 kg

CAB-9K10A-SW

Power Cord, 250VAC 10A MP232 Plug, Switzerland

 8.2 feet (2.5 m)

0.28 kg

CAB-9K10A-AU

Power Cord, 250VAC 10A 3112 Plug, Australia

8.2 feet (2.5 m)

0.28 kg

CAB-9K10A-IT

Power Cord, 250VAC 10A CEI 23-16/VII Plug, Italy

8.2 feet (2.5 m)

0.26 kg

CAB-9K12A-NA

Power Cord, 125VAC 13A NEMA 5-15 Plug, North America

8.2 feet (2.5 m)

0.32 kg

CAB-TA-NA

Power Cord, 125VAC 12A, North America

8.2 feet (2.5 m)

0.40 kg

CAB-TA-UK

Power Cord, 250VAC 10A, United Kingdom

8.2 feet (2.5 m)

0.30 kg

CAB-TA-250V-JP

Power Cord, 250VAC 15A, Japan

8.2 feet (2.5 m)

0.38 kg

CAB-TA-EU

Power Cord, 250VAC 10A, Continental Europe

8.2 feet (2.5 m)

0.24 kg

CAB-C15-CBN

Jumper Cord, 250VAC 12A, United States, Canada, Australia

4 feet (1.22 m)

0.20 kg

CAB-TA-IN

Power Cord, 250VAC 10A, South Africa

8.2 feet (2.5 m)

0.28 kg

CAB-TA-IS

Power Cord, 250VAC 16A, Israel

8.2 feet (2.5 m)

0.26 kg

CAB-C15-CBN-JP

Power Cord, 250VAC 12A, Japan

9.84 feet (3 m)

0.38 kg

CAB-C15-CBN-EURA

Power Cord, 250VAC 13A, EU

9.84 feet (3 m)

0.26 kg

CAB-C15-CBN-CK

Power Cord, 250VAC 13A, China

9.84 feet (3 m)

0.32 kg

CAB-PWR-C15-CHN-A

Power Cord, 250VAC 10A, China

8.2 feet (2.5 m)

0.32 kg

Regulatory Standards Compliance Specifications

This table lists the regulatory standards compliance for the switch.

Table 1. Regulatory Standards Compliance: Safety and EMC

Specification

Description

Regulatory compliance

Products should comply with CE Markings according to directives 2004/108/EC and 2006/95/EC.

Safety

  • CAN/CSA-C22.2 No. 60950-1 Second Edition

  • CAN/CSA-C22.2 No. 62368-1-19 Third Edition

  • ANSI/UL 60950-1 Second edition

  • IEC 62368-1

  • EN 62368-1

  • AS/NZS 62368-1

  • GB4943

  • UL 62368-1

EMC: Emissions

  • 47CFR Part 15 (CFR 47) Class A

  • AS/NZS CISPR22 Class A

  • CISPR22 Class A

  • EN55022 Class A

  • ICES003 Class A

  • VCCI Class A

  • EN61000-3-2

  • EN61000-3-3

  • KN22 Class A

  • CNS13438 Class A

EMC: Immunity

  • EN55024

  • CISPR24

  • EN300386

  • KN 61000-4 series

RoHS

The product is RoH-6 compliant with exceptions for leaded-ball grid-array (BGA) balls and lead press-fit connectors.