Overview

Explains how to manually deploy Catalyst Center using an ARM template. Covers the setup prerequisites, deployment steps, and verification process.

Manual deployment using an ARM template

Describes how to manually deploy Catalyst Center on Azure using an ARM template.

Prerequisites for manual deployment using an ARM template

Lists the requirements for your Azure account, disk size, network infrastructure, and region configuration, as well as the Catalyst Center environment, before starting the deployment.

Configure a custom NTP server

Shows how to configure a custom NTP server in the Catalyst Center ARM template using a text editor.

Deploy your Catalyst Center VA using an ARM template

Provides step-by-step instructions for deploying a Catalyst Center VA on Azure using a custom ARM template and the Azure portal.

Verify the Catalyst Center deployment

Outlines the steps to verify that the Catalyst Center VA is functioning correctly by checking the IP address configurations and testing access to the management interfaces.