This document provides a high-level description of the steps that are required to install the Cisco Crosswork Network Controller solution, which is made up of the Cisco Crosswork Infrastructure, Cisco Crosswork Data Gateway, and several Cisco Crosswork applications.
It is a supplement to the Cisco Crosswork Infrastructure 4.0 and Applications Installation Guide, which provides full installation requirements and details for the Cisco Crosswork portfolio.
Each step in this high-level installation workflow links directly to the sections in the above-mentioned installation guide, making it easier for you to find information specific to Crosswork Network Controller.
This document is not intended to be a comprehensive installation guide.
Cisco Crosswork Network Controller
Cisco Crosswork Network Controller is a network automation solution for deploying and operating IP transport networks that delivers increased service agility, cost efficiency, and optimization for faster time-to-customer value and lower operating costs.
The solution combines intent-based network automation to deliver critical capabilities for service orchestration and fulfilment, network optimization, service path computation, device deployment and management, and anomaly detection and automatic remediation. Using telemetry gathering and automated responses, Cisco Crosswork Network Controller delivers network optimization capabilities that are nearly impossible to replicate even with a highly skilled and dedicated staff operating the network.
Its unified user interface allows real-time visualization of the network topology and services, as well as service and transport provisioning, through a single pane of glass.
The fully integrated solution combines core capabilities from multiple innovative, industry-leading products including Cisco® Network Services Orchestrator (NSO), Cisco Segment Routing Path Computation Element (SR-PCE), and the Cisco Crosswork suite of applications.
Installation Requirements for Cisco Crosswork Network Controller Components
Components |
Version |
Installation Details |
---|---|---|
Cisco Crosswork Infrastructure (mandatory) A microservices-based platform that is the foundation required for running Crosswork on-premise applications. |
4.0 |
|
Cisco Crosswork Data Gateway (mandatory) Gathers information from the managed devices and forwards it to Cisco Crosswork Infrastructure and external destinations (if required). |
2.0 |
|
Cisco Crosswork Optimization Engine (mandatory) Provides real-time network optimization that allows operators to effectively maximize network capacity utilization, as well as increase service velocity. |
2.0 |
|
Cisco Crosswork Active Topology (mandatory) Enables visualization of topology and services on logical and geographical maps. |
2.0 |
|
Cisco Crosswork Change Automation (optional) Automates the process of deploying changes to the network. |
4.0 |
|
Cisco Crosswork Health Insights (optional) Performs real-time Key Performance Indicator (KPI) monitoring, alerting, and troubleshooting. |
4.0 |
|
Cisco Crosswork Zero Touch Provisioning (optional) Brings up compatible devices quickly and easily using a Cisco-certified software image and a day-zero software configuration of the customer's choice. |
2.0 |
|
Cisco Network Services Orchestrator (Cisco NSO) (mandatory) Crosswork Network Controller uses Cisco NSO for device management and service orchestration functionality. Cisco NSO is an orchestration platform that makes use of pluggable function packs to translate network-wide service intent into device-specific configuration. Cisco NSO provides flexible service orchestration and lifecycle management across physical and virtual network elements. For full Crosswork Network Controller functionality, Cisco NSO must be installed along with the Cisco NSO NEDs and function packs. |
5.4.2 or 5.4.4.1 |
Cisco NSO and NED Requirements |
Cisco Network Element Drivers (NEDs) (mandatory) Cisco NEDs comprise the network-facing part of Cisco NSO. They communicate over the native protocol supported by the device, such as Network Configuration Protocol (NETCONF), Representational State Transfer (REST), Extensible Markup Language (XML), CLI, and Simple Network Management Protocol (SNMP). |
Cisco IOS XR:
Cisco IOS:
|
|
Cisco NSO Transport-SDN Function Pack (mandatory) Consists of the following function packs:
|
2.0.0 |
|
Cisco NSO Device Lifecycle Management (DLM) Service Pack (mandatory) Installed on a Cisco NSO instance in order to synchronize device configurations in Cisco Crosswork with those in Cisco NSO. It effectively channels communication between the Crosswork DLM and Cisco NSO. |
1.0 |
|
Cisco Crosswork NSO Telemetry Traffic Collector Function Pack (mandatory) Cisco Crosswork Telemetry Traffic Collector Function Pack is installed on the Cisco NSO platform and is used to push services and network configurations to the devices. It utilizes Cisco NSO Reactive FastMap (RFM) nano services to manage the telemetry configuration on devices. This is primarily used for dial-out MDT collection. |
2.0.0 |
Cisco Crosswork Telemetry Traffic Collector Function Pack 2.0 Installation Guide |
Cisco Crosswork Change Automation NSO Function Pack (optional, only if you have installed Crosswork Change Automation) Cisco Crosswork Change Automation Function Pack enables a special access user to connect to Cisco NSO for all the configuration management operations performed during the execution of a Change Automation Playbook. |
1.0.0 |
Cisco Crosswork Change Automation Function Pack 1.0 Installation Guide |
High-level Installation Workflow
This section provides the high-level procedure for installing Cisco Crosswork Network Controller.
Before you begin - Ensure that the installation requirements are met. For more information, see Installation Requirements for Cisco Crosswork Network Controller Components.
Step |
Action |
Procedure |
---|---|---|
1 |
Ensure that you have installed Cisco NSO, Cisco NEDs, and the applicable function packs. |
Installation Requirements for Cisco Crosswork Network Controller Components |
2 |
Install the Crosswork network infrastructure cluster and check that all the cluster nodes are up and running. |
|
3 |
Download the CAPP files and install the Crosswork applications from the Crosswork UI. Components required for Crosswork Network Controller basic operations (mandatory components):
Optional components for Crosswork Network Controller advanced use cases:
|
|
4 |
Install the Crosswork Data Gateway(s). |
|
5 |
Add Cisco NSO to Crosswork as a provider to configure the network devices. |
|
6 |
If not already in place, add the Cisco Segment Routing Path Computation Elements (Cisco SR-PCE) to the network. |
|
7 |
Add the Cisco SR-PCE as a provider to enable Cisco Crosswork application access to an SR-PCE as an SDN controller. |
|
8 |
Get up and running post-installation. |