Support
Product Support
Switches
Cisco Catalyst IE9300 Rugged Series
Configuration Guides

Spanning Tree Protocol Configuration Guide, Cisco Catalyst IE9300 Rugged Series Switches

View all Saved Content

PDF

Is this content helpful?

Helpful Unhelpful

Suggestions for Improvement

Thank you for your feedback. Your response has been recorded.

Ask about this content

Spanning Tree Protocol Configuration Guide, Cisco Catalyst IE9300 Rugged Series Switches

Expand all sections

About this content

Spanning Tree Protocol

Spanning Tree Protocol
Establish the STP using BPDUs
BPDU exchange results
STP port roles
Bridge ID and switch priority
Port priority and path cost
Spanning Tree interface states
How a switch becomes the root switch
STP and redundant connectivity
Spanning Tree address management
Accelerated aging to retain connectivity
Spanning Tree modes and protocols
Spanning Tree instances
Spanning Tree interoperability and backward compatibility
Spanning Tree and switch stacks
Configuration guidelines
Default configuration
Configure Spanning Tree mode
Disable Spanning Tree on VLANs
Configure the root switch
Configure the secondary root switch
Configure port priority for an interface
Configure path cost for an interface
Configure VLAN switch priority
Configure VLAN hello time
Configure VLAN forward delay time
Configure the maximum-aging time for a VLAN
Configure the transmit hold-count
Monitor Spanning Tree status
Additional references for STP
Feature information for STP

Spanning Tree Protocol Configuration Guide, Cisco Catalyst IE9300 Rugged Series Switches

About this content

Updated: March 2, 2026

Provides metadata, ownership, legal, and navigation structure for the Spanning Tree Protocol Configuration Guide, Cisco Catalyst IE9300 Rugged Series Switches.

Spanning Tree Protocol

Guides network administrators through configuring and managing Spanning Tree Protocol to prevent loops and ensure redundant connectivity in switched network topologies.

Need help?

Open a support case

(Requires a Cisco Service Contract)

Bias-free language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.