Cisco WAP321 Wireless-N Access Point with Single Point Setup
Specifications Overview
| Series | Cisco Small Business 300 Series Wireless Access Points |
|---|---|
| Product Type | Access Points |
| Status |
End of Sale
|
| Release Date | 30-MAR-2012 |
| End-of-Sale Date | 04-APR-2017 |
| End-of-Support Date | 30-APR-2022 |
| Product ID | |
-
Document Categories-
Brochures
- Cisco WAP321 Wireless-N Selectable-Band Access Point with PoE Overview (PDF - 1 MB)
- Cisco WAP321 Wireless-N Selectable-Band Access Point with PoE Overview (French) (PDF - 1 MB)
- Cisco WAP321 Wireless-N Selectable-Band Access Point with PoE Overview (German) (PDF - 1 MB)
- Cisco WAP321 Wireless-N Selectable-Band Access Point with PoE Overview (Italian) (PDF - 1 MB)
- Cisco WAP321 Wireless-N Selectable-Band Access Point with PoE Overview (LATAM Spanish) (PDF - 1 MB)
- Cisco WAP121 and WAP321 Introduction to Single Point Setup (PDF - 207 KB)
-
Configuration Examples and TechNotes
- Access the Web-based Utility of the Wireless Access Point (WAP)
- Add Policy Map on WAP121 and WAP321 Access Points
- Add a Wireless Network to an Existing Wired Network using a Wireless Access Point (WAP)
- Advanced Wireless Radio Settings on WAP121 and WAP321 Access Points
- Associate Wireless Scheduler on a Wireless Access Point
- Basic System Settings Configuration on WAP121 and WAP321 Access Points
- Captive Portal Global Configuration on WAP321 Access Point
- Captive Portal Instance Association on WAP321 Access Points
- Captive Portal Instance Configuration on WAP321 Access Point
- Captive Portal Local User Configuration on WAP321 Access Points
- Clear Configuration Files on the Wireless Access Point (WAP)
- Client Quality Of Service (QoS) Association Configuration on the WAP121 and WAP321 Access Points
- Configuration of 802.1X Authentication on WAP121 and WAP321 Access Points
- Configuration of Basic Wireless Radio Settings on the WAP121 and the WAP321 Access Points
- Configuration of Packet Capture on WAP121 and WAP321 Access Point
- Configuration of a WAP Cluster with WAP321
- Configure 802.1X Supplicant Settings on a Wireless Access Point
- Configure Bandwidth Utilization on a Wireless Access Point
- Configure Captive Portal on your Wireless Access Point Using the Setup Wizard
- Configure IPv4 and IPv6 on a Wireless Access Point
- Configure Local Groups in Captive Portal on the WAP321 Access Point
- Configure MAC, IPv4, and IPv6 Access Control List on a Wireless Access Point
- Configure Management Access Control List (ACL) on a Wireless Access Point
- Configure Packet Capture to Optimize Performance on a Wireless Access Point
- Configure Port Settings on the Wireless Access Point (WAP)
- Configure Quality of Service (QoS) on a Wireless Access Point
- Configure SSID-to-VLAN Mapping on a Wireless Access Point
- Configure Scheduler on a Wireless Access Point
- Configure Single Point Setup on a Wireless Access Point
- Configure Time Settings on a Wireless Access Point
- Configure Wireless Security Settings on a WAP
- Configure Work Group Bridge on WAP121 and WAP321 Access Points
- Configure Workgroup Bridge on a Wireless Access Point (WAP)
- Configure a Cluster on a Wireless Access Point (WAP) through Single Point Setup
- Configuring Virtual Access Points (VAPs) on the WAP121 and WAP321
- Connect Multiple Access Points Together through Wireless Distribution System (WDS)
- Creation and Configuration of IPv6 Based Class Map on the WAP121 and WAP321 Access Points
- Creation and Configuration of IPv4 Based Class Map on the WAP121 and WAP321 Access Points
- Creation and Configuration of MAC Based Access Control List (ACL) on the WAP121 and WAP321 Access Points
- Creation and Configuration of a Rule for IPv6 Based Access Control List (ACL) on the WAP121 and WAP321 Access Points
- Creation and Configuration of a Rule for IPv4 Based Access Control List (ACL) on the WAP121 and WAP321 Access Points
- Disable SSID Broadcast on a Wireless Access Point
- Email Alert Configuration on the Cisco WAP121 and WAP321 Access Point
- Email Alert Operational Status on WAP121 and WAP321 Access Points
- Enable a Captive Portal on your Cisco Wireless Network
- IPv6 Configuration on WAP121 and WAP321 Access Points
- Log Settings Configuration and Status on WAP121 and WAP321 Access Points
- MAC Address Filtering on WPA121 and WPA321 Access Points
- Manage User Accounts on WAP121 and WAP321 Access Points
- Management Access Control List Configuration on WAP121 and WAP321 Access Points
- Management and Untagged VLAN IDs Configuration on WAP121 and WAP321 Access Points
- Password Complexity Configuration on the Cisco WAP121 and WAP321 Access Points
- Port Settings Configuration on WAP121 and WAP321 Access Points
- RADIUS Server Settings on WAP121 and WAP321 Access Points
- Radio Statistics on the WAP121 and WAP321 Access Points
- Reboot and Factory Default Reset on WAP121 and WAP321 Access Points
- Reboot and Reset the Wireless Access Point to Factory Default Settings
- Rogue Access Point (AP) Detection on the WAP121 and WAP321 Access Points
- Secure Socket Layer (SSL) Certificate Management on WAP121 and WAP321 Access Points
- Set up a Wireless Network using a Wireless Access Point (WAP)
- Setup Wizard Configuration on the WAP121 and WAP321 Access Points
- Simple Network Management Protocol (SNMP) General Settings on the WAP121 and WAP321 Access Points
- Simple Network Management Protocol (SNMP) Groups Configuration on the WAP121 and WAP321 Access Points
- Simple Network Management Protocol (SNMP) Target Configuration on the WAP121 and WAP321 Access Points
- Simple Network Management Protocol (SNMP) User Configuration on the WAP121 and WAP321 Access Points
- Simple Network Management Protocol (SNMP) Views Configuration on the WAP121 and WAP321 Access Points
- Single Point Setup Configuration on WAP121 and WAP321 Access Points
- Single Point Setup Sessions on WAP121 and WAP321 Access Points
- System Summary Status on WAP121 and WAP321 Access Points
- System Summary Status on the Cisco WAP121 and WAP321 Access Points
- View Failed Authentication Clients in Captive Portal on WAP321
- Wi-Fi Protected Setup (WPS) Configuration on WAP121 and WAP321 Access Points
- Wi-Fi Protected Setup (WPS) Enrollment Configuration on the WAP121 and WAP321 Access Points
- WiFi Protected Access Pre-Shared Key (WPA-PSK) Complexity Configuration on the WAP121 and WAP321 Access Points
- Wireless Quality of Service (QoS) Configuration on WAP121 and WAP321 Access Points
-
Data Sheets
- Cisco WAP321 Wireless-N Selectable-Band Access Point with Power over Ethernet Data Sheet (Chinese) (PDF - 819 KB)
- Cisco WAP321 Wireless-N Selectable-Band Access Point with Power over Ethernet Data Sheet (French) (PDF - 624 KB)
- Cisco WAP321 Wireless-N Selectable-Band Access Point with Power over Ethernet Data Sheet (German) (PDF - 640 KB)
- Cisco WAP321 Wireless-N Selectable-Band Access Point with Power over Ethernet Data Sheet (Italian) (PDF - 1 MB)
- Cisco WAP321 Wireless-N Selectable-Band Access Point with Power over Ethernet Data Sheet (LATAM Spanish) (PDF - 1 MB)
- Cisco WAP321 Wireless-N Selectable-Band Access Point with Single Point Setup Data Sheet
-
Install and Upgrade Guides
-
Maintain and Operate Guides
- Cisco WAP121 and WAP321 Administration Guide (PDF - 1 MB)
-
Partner Resources
-
Release Notes
- Open Source Used In Cisco WAP321 1.0.6.7 (PDF - 1 MB)
- Open Source Used In Cisco WAP321 1.0.6.6 (PDF - 1 MB)
- Open Source Used In Cisco WAP321 1.0.5.x (PDF - 1 MB)
- Open Source Used In Cisco WAP321 1.0.4.x (PDF - 1 MB)
- Open Source Used In Cisco WAP321 1.0.4.x (PDF - 1 MB)
- Open Source Used In Cisco WAP321 1.0.3.x (PDF - 561 KB)
- Open Source Used In Cisco WAP321 1.0.3.x (PDF - 561 KB)
- Open Source Used In Cisco WAP321 1.0.1.x (PDF - 365 KB)
- Open Source Used In Cisco WAP321 1.0.1.x (PDF - 365 KB)
- Open Source Used In Cisco WAP121 and WAP321 1.0.6.5 (PDF - 1 MB)
- Open Source Used In Cisco WAP121 and WAP321 1.0.6.2 (PDF - 1 MB)
- Open Source Used In WAP321 1.0.4.x (PDF - 1 MB)
- Open Source Used In WAP321 v1.0.0 (PDF - 427 KB)
- Open Source Used In WAP321_1_0_4_4 (PDF - 1 MB)
- Open Source Used in Cisco WAP321 1.0.2.x (PDF - 364 KB)
- Open Source Used in Cisco WAP321 1.0.2.x (PDF - 364 KB)
- Release Notes for the Cisco WAP121 and WAP321 Firmware Release 1.0.6.7 (PDF - 124 KB)
- Release Notes for the Cisco WAP121 and WAP321 Firmware Release 1.0.6.6 (PDF - 120 KB)
- Release Notes for the Cisco WAP121 and WAP321 Firmware Release 1.0.6.5 (PDF - 122 KB)
- Release Notes for the Cisco WAP121 and WAP321 Firmware Release 1.0.6.2 (PDF - 125 KB)
- Release Notes for the Cisco WAP121 and WAP321 Firmware Release 1.0.5.3 (PDF - 147 KB)
- Release Notes for the Cisco WAP121 and WAP321 Firmware Release 1.0.4.2 (PDF - 73 KB)
- Release Notes for the Cisco WAP121 and WAP321 Firmware Release 1.0.3.x (PDF - 95 KB)
- Release Notes for the Cisco WAP121 and WAP321 Firmware Rlease 1.0.2.3 (PDF - 89 KB)
- Release Notes for the WAP121 and WAP321 Firmware Release 1.0.4.4 (PDF - 78 KB)
- Release Notes for the WAP121 and WAP321 Firmware Release 1.0.4.2 (PDF - 101 KB)
-
Security Advisories, Responses and Notices
Most Recent
- Cisco Small Business 100 Series and 300 Series Wireless Access Points Denial of Service Vulnerability 15-Aug-2018
- Cisco Small Business 100 Series and 300 Series Wireless Access Points Encryption Algorithm Downgrade Vulnerability 15-Aug-2018
- Cisco WAP150 Wireless Cross-Site Scripting Vulnerability 07-Apr-2018
- Multiple Vulnerabilities in Wi-Fi Protected Access and Wi-Fi Protected Access II 07-Apr-2018
-
Translated End-User Guides
- Cisco WAP121 and WAP321 Administration Guide (French) (PDF - 1 MB)
- Cisco WAP121 and WAP321 Administration Guide (German) (PDF - 1 MB)
- Cisco WAP121 and WAP321 Administration Guide (Simplified Chinese) (PDF - 1 MB)
- Cisco WAP121 and WAP321 Administration Guide (Spanish) (PDF - 1 MB)
- Cisco WAP121 and WAP321 Quick Start Guide (Chinese, China) (PDF - 424 KB)
- Cisco WAP121 and WAP321 Quick Start Guide (French, France) (PDF - 417 KB)
- Cisco WAP121 and WAP321 Quick Start Guide (German, Germany) (PDF - 399 KB)
- Cisco WAP121 and WAP321 Quick Start Guide (Hebrew) (PDF - 438 KB)
- Cisco WAP121 and WAP321 Quick Start Guide (Italian, Italy) (PDF - 320 KB)
- Cisco WAP121 and WAP321 Quick Start Guide (Portuguese, Brazil) (PDF - 314 KB)
- Cisco WAP121 and WAP321 Quick Start Guide (Russian) (PDF - 428 KB)
- Cisco WAP121 and WAP321 Quick Start Guide (Spanish, Mexico) (PDF - 319 KB)
- Release Notes for the Cisco WAP121 and WAP321 Firmware Release 1.0.2.3 (French) (PDF - 70 KB)
-
Troubleshooting TechNotes
Contact Cisco
Technical Support
- Open a TAC Case Online
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
Technical Sales Questions
- Contact Us for Sales Questions
- Call 1 800 553 6387
- US/CAN | 5am - 5pm Pacific
- Other Countries
Cisco Services
-
Feedback